TCMC- Improvements of Subam Nagar Park PHASE-2 in Ward No.17 Zone-2

Earth work in all soils except medium rock / hard rock requiring blasting and conveying for formation of bundwith lead of 0 to 100metre deploying earth moving machinery and tippers including benching, formation of bunds, breaking cclods, sectioning et., complete

Plain Cement Concrete 1:4:8 mix (One Cement, Four Fine Aggregate and Eight Course Aggregate) Using 40mm ISS HBG metal including all cost conveyance of materials and labour charges including vibrating charges etc. complete as per standard specification.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation.

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Providing Granular surface base to the required surface using murram, Granular soil of size varying from 4mm to 75mm including cost of material and cost of labour for stacking, spreading and consolidating layer by layer (Each layer not exceeding 100mm) including hire charges of Roller etc, complete as per the direction of Departmental officers.

Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM ) soecification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Supplying and fixing of MS grills with Door and windows with one coat of Red oxide with primer including all costs such as welding, grinding and fabrication charges, cost and conveynace of all materials to site etc, compete as per standard specification.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying and fixing of 6 metre length single bracket pole with base plate (250x250x6mm0 76.10mm OD x 3.65 mm thick x 6000mm Length in control box with foundation hardwares. etc complete as per standard specification. As per M 2118

Supply and Fixing of 48 W LED Street Light Fittings as per PWD SOR P.No.69 M1291

Supply and Fiixing of Fixing Duck Merrygo Round Fiber Thickness – 4mm, GIPipe- -2”,1 1/2”, Pipe thickness -1.6mm, Paint –Auto Coat and Area Size -15’X10 including cost and coveyance and all other labour charges etc., complete

Supply, Delivery and Providing Three Seater back slope Granite stiff sitting benches 5 feet in length 1.50 feet width 600x450x100 mm size Hard Granite slab side walls, 150x45x100 mm size bench slab back slope slab including cost and conveyance and fixing in position etc complete

Supply, Delivery and Providing single seater Granite stiff sitting single round bench (Stool type) 100mm thick 45cm granite slab for bench slab and 150mm dia on middle and 30cm on end posts including cost and conveyance and fixing in position etc

Supplying and fixing of Double Swing of height 2.40m height with 40mm dia MS pipes support as legs and top bar is 50mm dia. The seat is 9mm thick reinforced rubber with Antiskid chequred top with heavy ball bearing and the suspension is 7mm dia electro galvanized chain and the cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supplying and fixing of four seater SEESAW to a height of 0.50m with 80mm dia leaver and 40mm top bar with MS pipes. The seatr is of moulded plastic with heavy duty bush bearing. The cost shall inclusive of all materials, labours and fixing etc complete as directed by the dpeartmetal officers

Supplying and fixing of slide for below 12 years old childrens to a length of 3.00 m with 80mm dia leaver and 40mm top bar with MS pipes. The seater is of moulded plastic. The ladder frme is made up of 25mm M.S. ppe., hanrail 20mm dia MS pipe and the centre support is 80mm dia MS pipes. The cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supplying and fixing of Jungle Gym for below 12 years old childrens to a height of 2.10m with 80mm dia leaver and 40mm top bar with M.S. Pipes. The ladder frame is made up of 25mm M.S.Pipe, hanrail 20mm dia M.S. Pipe and the centre support is 80mm dia M.S. Pipe The cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supply and laying of 2 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.Ele. SD -194 PAGE-80-81

Providing various designs of Animal Dust bins made of 3 layer fiber structure with multi colour powder coating. The height of the dist bins 4 feet available models are penguin, Rabbit, Fish and monkey Q

Providing Gardening and landscapping with Korean Grass and article plants with all costs and a bed layer of red soil to 150mm thick, including cost and conveyance of all matrials to site etc complete as per standard spcification - 10 sqm

Providing and planting of Border plants using duranda clirodendrom, foliage, Exora, PMC neerium etc with inclosing cost of plants, red earth manure and including all labour charges earth work excavation fertilizing planting, etc complete

Supply and fixing of Single Twister Sitting Twister- Outdoor Gym Equipment Maximum User Weight of 100 kilogram, Main Central Pipe & Main Frame Pipe of 100mm dia G.I. Pipe with 3.6mm Thickness Standing/ Sitting Twister Frame Pipe 32 mm G.I. Pipe 32 mm dia with 3.2mm Thickness, Disk Support Pipe at Bottom Pipe 80 mm dia G.I. Pipe, Rotating Disk Support, Handle Frame Pipe 32mm dia G.I. pipe Thickness with 3.2mm Thickness,Foundation Pipes 750mm deep GI pipe, supported with M.S. Angle 25 X 25 X4mm of Foundation Pipe 100mm with 3.6mm Thickness,Ball Bearing Foot Rest Aluminum casting material inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supply and fixing of Rower Maximum User Weight 120 kilogram, Main Central Pipe 100mm dia G.I. Pipe Heavy, Handle Frame 32mm dia G.I. pipe, Seat Frame 32mm dia G.I. Pipe, 32mm dia G.I. Pipe, Connecting Links Pipe, Foot Rest Pipe 32mm dia G.I. Pipe, MS Foundation Plate Thickness 12 millimeter 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X4mm Seat and Back Rest 2.5mm thick, M.S. Perforated with uniformbending radius to avoidsharp edges Bearings Tapered Roller Bearing inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supply and fixing of Air Walker/ Stroller Single Maximum User Weight 110 kilogram for Main Frame 125mm dia G.I. Pipe, 40mm dia G.I. Pipe Leg Movement Frame Pipe, Handle Frame 25mm dia G.I. pipe, Tapered Roller Bearing Foot Rest Aluminum castingmaterial MS Foundation Plate Thickness 12 millimeter, Foundation Pipes 750mm deep GI Pipe, supported withM.S. Angle 25 X 25 X4mm inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supply and fixing of Chest Press SINGLE for Maximum User Weight 100 kilogram, Main Central Pipe 100mm dia G.I. Pipe, Handle Frame 32mm dia G.I. pipe, Seat Frame 32mm dia G.I. Pipe, Connecting Links 25mm dia G.I. Pipe, Foot Rest Pipe 32mm dia G.I. Pipe, MS Foundation Plate Thickness 10mm Foundation Pipes with anchoring 500mm deep GI Pipe, Seat and Back Rest 2mm Thick G.I. Seat with uniform bending radius to avoid sharpedges inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supply and fixing of Leg Press Single Maximum User Weight 100 kilogram, Main Central Pipe 80mm dia G.I. Pipe, Moving Frame Pipe 80mm dia G.I. Pipe, Foot Rest Frame/ Foot Rest Hinging Pipe 25mm dia G.I. Pipe, Connecting Links 25mm dia G.I. Pipe, MS Foundation Plate Thickness 10mm Foundation Pipes with anchoring 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X4mm, Seat and Back Rest 3mm thick, HDPE with uniform bending radius to avoid sharpedges inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.