SPECIAL REPAIR/REPLACEMENT OF UNSERVICEABLE UPS IN I LEVEL ROOM IN 122 SATA REGT (MTN) AT MISSAMARI UNDER GE MISSAMARI AND SPECIAL REPAIRS TO WATER PIPE LINE AT 122 SATA REGT AND OLD PUMP HOUSE AREA AT MISSAMARI

Amount

Taking down UNSV UPS of any type and any capacity incl taking out connection from panel and disconnecting all UNSV cable and accessories and depositing to MES store yard for safe custody, complete all as specified and as directed.

Supply & Fixing in replacement of UNSV online double conversion type, IGBT based pure sine wave UPS system having standard for 30min back up three phase AC input 300 to 450 V and out put voltage 415 V (+ 1% to - 1%) of capacity 30 KVA, inbuilt static & maintenance bypass lines and including BCB, and fire redundant Nyvin cable & UPS to battery connecting cable complete all as specified and as directed by Engr-in-Charge. (Make & Model of UPS : VERTIV Emerso Model-Hipulse U/Hitachi UPS, 30 KVA ITA of Rating 30 KVA. Make & Model of SMF Battery : AMARON QUANTA AMARARAJA/EXCIDE BATTERY FOR 30 MIN BACKUP 12 VOLT 65 AH)

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth in soft/loose soil includind black cotton soil and getting out as specified and directed by EIC.

Returning , filling in trenches including spreading leveling, watering, well ramming in layers not exc 25cm with excavaated including making mound with balance soil all as directed by EIC.

Taking up or down of GI pipe/tubing 20 mm bore (dia) including connections and fittings from trenches, walls, floors, etc, all as specified and directed Engineer In Charge .

Taking up or down of GI pipe/tubing 25 mm bore (dia) including connections and fittings from trenches, walls, floors, etc, all as specified and directed Engineer In Charge .

Taking up or down of GI pipe/tubing 40/50 mm bore (dia) including connections and fittings from trenches, walls, floors, etc, all as specified and directed Engineer In Charge .

Taking up or down of GI pipe/tubing 80 mm bore (dia) including connections and fittings from trenches, walls, floors, etc, all as specified and directed Engineer In Charge .

Taking up or down cast iron water mains 80mm bore (dia) with all all fittings with spigot and socket ends and lead joints including burning out joints and recovering serviceable pipes, lead etc, keep in safe custody for reuse, etc complete all as specified and as directed.

Taking up or down cast iron water mains 100mm bore (dia) with all all fittings with spigot and socket ends and lead joints including burning out joints and recovering serviceable pipes, lead etc, keep in safe custody for reuse, etc complete all as specified and as directed.

Taking up or down cast iron water mains 150mm bore (dia) with all all fittings with spigot and socket ends and lead joints including burning out joints and recovering serviceable pipes, lead etc, keep in safe custody for reuse, etc complete all as specified and as directed.

Supply, laying, jointing & testing of Ductile Iron (DI) pipes 150mm bore (dia) with spigot & socket ends, centrifugally cast (spun) with cement mortar lining in inner side confirming to IS : 8392 / 2000 in standard length for classification K-7 and other relevant standards and metallic Zinc coating followed by a finishing layer of epoxy paint in oter side, suitable for push-on joint (rubber gasket joint) in any length and laid in trenches, complete all as specified and as directed by Engr-in-Charge. Note : Rate of rubber gasket joint shall be included in quoted rates.

Supply, laying, jointing & testing of Ductile Iron (DI) pipes 100mm bore (dia) with spigot & socket ends, centrifugally cast (spun) with cement mortar lining in inner side confirming to IS : 8392 / 2000 in standard length for classification K-7 and other relevant standards and metallic Zinc coating followed by a finishing layer of epoxy paint in oter side, suitable for push-on joint (rubber gasket joint) in any length and laid in trenches, complete all as specified and as directed by Engr-in-Charge. Note : Rate of rubber gasket joint shall be included in quoted rates.

Supply, laying, jointing & testing of Ductile Iron (DI) pipes 80mm bore (dia) with spigot & socket ends, centrifugally cast (spun) with cement mortar lining in inner side confirming to IS : 8392 / 2000 in standard length for classification K-7 and other relevant standards and metallic Zinc coating followed by a finishing layer of epoxy paint in oter side, suitable for push-on joint (rubber gasket joint) in any length and laid in trenches, complete all as specified and as directed by Engr-in-Charge. Note : Rate of rubber gasket joint shall be included in quoted rates.

Supply, laying, & fixing 3 layered (outer green coloured UV stablized, middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R (Polypropyelene random copolymer) pipes 90mm dia outer dia ISI marked and fittings including plain PPR fittings and brass threaded PPR fittings and cramping, cutting and making good to the damages of grade PN-16 SDR 7.4 including laid in trenches or surface, fixing on wall with clamps at 1.00mm spacing including testing of joints complete all as specified and as directed by the Engr-in-Charge. Note : Excavation shall be measured and paid separately.

Supply, laying, & fixing 3 layered (outer green coloured UV stablized, middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R (Polypropyelene random copolymer) pipes 63mm dia outer dia ISI marked and fittings including plain PPR fittings and brass threaded PPR fittings and cramping, cutting and making good to the damages of grade PN-16 SDR 7.4 including laid in trenches or surface, fixing on wall with clamps at 1.00mm spacing including testing of joints complete all as specified and as directed by the Engr-in-Charge. Note : Excavation shall be measured and paid separately.

Supply, laying, & fixing 3 layered (outer green coloured UV stablized, middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R (Polypropyelene random copolymer) pipes 50mm dia outer dia ISI marked and fittings including plain PPR fittings and brass threaded PPR fittings and cramping, cutting and making good to the damages of grade PN-16 SDR 7.4 including laid in trenches or surface, fixing on wall with clamps at 1.00mm spacing including testing of joints complete all as specified and as directed by the Engr-in-Charge. Note : Excavation shall be measured and paid separately.

Supply, laying, & fixing 3 layered (outer green coloured UV stablized, middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R (Polypropyelene random copolymer) pipes 32mm dia outer dia ISI marked and fittings including plain PPR fittings and brass threaded PPR fittings and cramping, cutting and making good to the damages of grade PN-16 SDR 7.4 including laid in trenches or surface, fixing on wall with clamps at 1.00mm spacing including testing of joints complete all as specified and as directed by the Engr-in-Charge. Note : Excavation shall be measured and paid separately.

Supply, laying, & fixing 3 layered (outer green coloured UV stablized, middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R (Polypropyelene random copolymer) pipes 25mm dia outer dia ISI marked and fittings including plain PPR fittings and brass threaded PPR fittings and cramping, cutting and making good to the damages of grade PN-16 SDR 7.4 including laid in trenches or surface, fixing on wall with clamps at 1.00mm spacing including testing of joints complete all as specified and as directed by the Engr-in-Charge. Note : Excavation shall be measured and paid separately.

Supply and fix PP-R gate valve (Brass insert) 3 layered (outer green coloured UV stablized, middle bloack coloured, UV stabalized, and inner most layer white coloured with antimicrobial property fusion welded PP-R (Polypropyelene random copolymer) gate valve brass 25mm outer dia light weight ISI marked as per requirement of the site with handle screwed both ends for PP-R pipes or for unions fixed of grade PN-25, SDR-7.4, complete all as specified and as directed by the Engr-in-Charge.

Supply and fix PP-R gate valve (Brass insert) 3 layered (outer green coloured UV stablized, middle bloack coloured, UV stabalized, and inner most layer white coloured with antimicrobial property fusion welded PP-R (Polypropyelene random copolymer) gate valve brass 90mm outer dia light weight ISI marked as per requirement of the site with handle screwed both ends for PP-R pipes or for unions fixed of grade PN-25, SDR-7.4, complete all as specified and as directed by the Engr-in-Charge.

M&L for making connections of PP-R distribution branch with PPR main of outer dia of pipes 16mm to 40mm size by providing and fixing tee including cutting and making fusion joint etc, complete all as specified and as directed by the Engr-in-Charge.

M&L for making connections of PP-R distribution branch with PPR main of outer dia of pipes 50mm to 75mm size by providing and fixing tee including cutting and making fusion joint etc, complete all as specified and as directed by the Engr-in-Charge.

Burning out of lead joint in cast iron pipes of 80mm bore (dia), complete all as specified and as directed. Note : Excn & earth work if required shall be measured and paid under appropriate item.

Burning out of lead joint in cast iron pipes of 100mm bore (dia), complete all as specified and as directed. Note : Excn & earth work if required shall be measured and paid under appropriate item.

Burning out of lead joint in cast iron pipes of 150mm bore (dia), complete all as specified and as directed. Note : Excn & earth work if required shall be measured and paid under appropriate item.

M & L for run lead joints for pipes and fittings (spigot and socket ends) 80 mm bore (dia) and testing complete all as specified and directed by EIC.

M & L for run lead joints for pipes and fittings (spigot and socket ends) 100 mm bore (dia) and testing complete all as specified and directed by EIC.

M & L for run lead joints for pipes and fittings (spigot and socket ends) 150 mm bore (dia) and testing complete all as specified and directed by EIC.

S&F cast iron sluice valve 150mm bore (dia), comply with IS : 14846-2000, Class PN-1.6, both ends flanged, having gun metal working parts, stainless steel spindle with cast iiron hand wheel with all necessary fixing arrangements such as gaskets, mild steel nuts, bolts, washers, etc and testing including taking down unserviceable sluice valve, complete all as specified and as dirfected.

M&L for Construction of brick masonary valve chamber of size 900x900x900mm (internal dimension) one brick thick wall in cement mortar 1:4 on 100mm thick PCC 1:4:8 (40mm graded aggregage) in foundation, rendering 15mm thick internally and externally upto 150mm below GL, providing 3.0mm thick MS sheet valve pit cover, welded with 40x5mm flat iron frame alround including provision of hinges, handle with locking arrangement and 40x40x6mm angle iron frame fixed on top of valve pit by means of hold fast150mm long, embedded in PCC 1:2:4 (20mm grade aggregate) block of size 230x200x100mm, applying two coats of anti-corrosive paint to all exposed steel surfaces over a coat of red-oxide zinc chrome primer after preparation of surfaces and necessary earth work in soft/loose soil including demolition of unserviceable valve pit, complete all as specified and directed by Engineer in Charge.

S&F DI Bends tapers, Tees, pieces (single or double branch) anuy type and angle/radius and straight connection pieces for pipe upto 300mm bore complete all as specified and directed by the Engr-in-Charge.

M/S SR BUILDERS

Saraswati Auto Works

PURBANCHAL BUILDERS