541-1-District Moradabad mein PD PWD Moradabad ke antargat padne wale Margo per Road Safety ka Karya

TRAFFIC SIGNS - 90 cm Equilateral Triangular board Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. LKO S.I. No. 18(I) Chap. 26.

TRAFFIC SIGNS - MAXIMUM SPEED LIMIT Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly designd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.LKO S.I. No. 18(V) Chap. 26.

Providing and laying of hot appiled thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC: 35 The finished surface to be level, uniform and free from streak and holes Edge line/centre line/Zebra Crossing/Rumble stripe LKO S.I. No. 2 Chap. 26.

Providing and laying Repeated bar marking with hot appiled thermoplastic compound 5 mm thick including reflectorising glass beads @ 500 gms per sqm area, Thickness of 5 mm is exclusive of surface applied glass beads as per IRC: 35 The finished surface to be level, uniform and free from streak and holes as per IRC : 35-2015. LKO S.I. No. 18(III) Chap. 26.

Road Delineator Providing and fixing of standard metal delinator as per IRC 79: 2019 consisting of minimum retro reflective unit exposed area of 330 square cm in white color full cube corner micro prismatic non metalic retro relective sheeting on each side conforming with IRC 67:2012 and meeting the coefficent of retro reflection values as per ASTM D 4956 Type XI Table specification the delinator shall be painted with powder coat of minimum 40 mircons thickness on top which retro reflective sheeting shall be pasted on both sides the structure shall be manufactured in roll forming process and shall have height not less than 800 mm above the ground while being installed the front and back faces of the delineator shoud be curved with a radius of not more than 200 mm and with delta angle (or central agle of curve) lying between 20 degree and 30 degree to increase the visibility of the delineator for vehicles moving in continous curves the delineator shall have grooves across the length to make the reflective sheeting vandai proof) the retro reflective sheeting shall be tested for 3 year outdoor weathering test in india conditions as per IRC 67:2012 & proof of the same in form of government report shall be uploaded which quoting tender. if somehow tender pre qualification confition do not ask for government report then the report shall be submitted to engineer in charge before finalization of bill the delineator is ment for application on gaps in median traffic inslands dengerous bendsd roundbouts narrow bridges etc or as per desired by site engineer. but excluding G.S.T.

TRAFFIC SIGNS - HAZARD MARKER (LEFT) Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly designd foundation with M-15 grade cement conc. 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.

Direction and Place Identification Signs with size more than 0.9 sqm size Board Type IV Providing and fixing of retro reflective cautionary, mandatory and informatory sign as per IRC : 67-2012 made of high intensity grade sheeting vide clause 801.3 friced over aluminium sheeting type IV 1.5 mm thick supported on a mild steel angle iron pst 75mm x 75mmx 6mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement 45cmx45cmx60cm below ground level as per aproved drawing. 1.20x0.90m rectangular board Type IV

Speed Table (Trapezoidal Hump) Providing and Constructing of Speed Table with Stone set pavement and premix carpet to the required grade, level and alignment, rolling with smooth wheeled roller to achive the desired compaction as per direction E/I.