REPAIRS TO HARD STANDING, FENCING, DRAIN AND MISC B/R ITEMS OF VARIOUS UNIT AT NAGPUR UNDER AGE B/R-II AT KAMPTEE

Amount

Demolition of cement concrete in ground floor & pavings not exc 15cm thick (below or above ground level) complete all as specified and directed.

M&L for sand filling under floorings/ pavement spread and levelled in layers not exc 15cm thick complete including watering and consolidation complete all as specified and directed.

M&L for machine pressed precast conctete interlocking paver block colour glossy finished rubber pressed any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 Grade ® with grey cement and pigment complete all as specified and directed.

M&L for chequered cement concrete tiles colour glossy finished rubber pressed 30cm x 30cm x 25mm thick set jointed and pointed in neat cement slurry and pointed in coloured pigment over 20mm cement screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for hardcore of gauge not exc. 63mm broken stone or boulders deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for plain cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for cement concrete tybe B-1, 1:2:4 (using 20mm graded stone aggregate) as in floor finish, concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cills, steps, seismic and other similar bands, plinth courses, lacing courses parapets and railing upto 60cm height, copings, kneelers, bed plates, hold fasts block, filling on pressed steel door/ frame etc complete all as specified and directed.

M&L for forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'B' complete all as specified and directed.

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m complete all as specified and directed.

Demolition of reinforced cement concrete any description and in any position not otherwise specifically provided for and disposal of unserviceable materials, debris and rubbish off the premises complete all as specified and directed.

M&L for precast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs, for manholes etc and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed.

M&L for brick work with fly ash brick, old size, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in coping including weathering, throating and necessary formwork complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and finished fair and even without using extra cement complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed.

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out hard/ dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, complete all as specified and directed.

M&L for cement concrete type B-2, 1:2:4 (Using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

S&F mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes for notching of wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

Supply only chain link MS galvanisd fencing, any size or type complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brickwork or on concrete surfaces in cement mortar (1:6) and finishing surfaces even and fair complete all as specified and directed.

S&F mild steel screw bolts of dia 5-10mm (machine made) with hexagonal or square at one end and screwded with other end or screwed both ends length of bolt not exc 5cm long complete all as specified and directed.

S&F mild steel round bars of 10mm dia and over in chain link fencing complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and removing from site of work complete all as specified and directed.

Removing building materials etc to a distance of exc 5.0 km, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed.

Dismantling of AC (Corrugated or semi corrugated etc) sheets in roof covering including ridges complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for roof trusses (framed), trussed, purlins, crane ganbies, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to IS 1161-1979 grade Fe 410W (Gde E-250) quality A complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.)[(-) Rs.85,460.68]

M/s Jagdish Staioners and General Stores

S D WAGHAMSHI

M/s M.G. Hargunani

AK CONSTRUCTION

khushal constructions

M/s Rahul Traders

NORTH INDIA PEST CONTROL

Bidder Name

S D WAGHAMSHI

khushal constructions

M/s Rahul Traders

Devika Constructions

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani

NORTH INDIA PEST CONTROL

AK CONSTRUCTION