REPAIR/MAINT OF BLACK TOP ROAD AND REPLACEMENT OF FURNITURE AT 19 AD, 707 TSU, 955 AND OTHER UNITS UNDER ZONE B UNDER GE(I) GOS

Scarifying or picking Gravelled Macadam or Bituminous Macadam surfaces in area n.exc 400 Sqm and exc 50 mm and not exc 100 mm deep complete all as specified and as directed.

M&L for applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 sq metre of paving bitumen (VG-10) complete all as specified and directed.

M&L for premixed bituminous macadam with 4% binder paving bitumen (VG-30) content by wt. of total mix laid/ rolled and compacted to required gradient and camber consolidated thickness 75 mm thickness or less, and rolled with power roller 8 to 10 Ton complete all as specified and directed

Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces using heavy duty air compressors to remove all loose dirt etc complete all as specified and as directed.

M&L for applying evenly a priming/tack coat with bituminous primer @ 05 Kg/10 Sqm over existing surfaces using paving bitumen VG-10 by mechanical sprayer etc complete all as specified and directed.

M&L for 40mm thick (Consolidated thickness) bituminous premixed Semi Dense Asphaltic Concrete(SDAC) with 5.5% binder content (VG-30) by weight to total mix, Mixed in automatic hot mix plant, laid by using self propelled mechanical paver, rolled and compacted to required camber and gradient with 8 to 12 tonne capacity power roller to a uniform smooth surface complete all as specified and as directed. Note :- The actual requirement of binder shall be as per the job mix design and the tests specified. However quantity of bitumen from the mix design found more than specified 5.5%, the same shall be provided with no extra cost to the Govt. In case binder content found to be less than 5.5% as per mix design, the same shall be regularised as per actual mix design with minus price adjustment for less bitumen at market rate at the time of execution. The quantity of 5.5% mentioned is exclusive of any wastage and no wastage shall be taken into account for the purpose of above adjustment.

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

S & F in repair solar cat eye aluminium alloy (100 % water proofing design according to 65) of size 125 mmx125 mmx25 mm (shank 65 mm) of high efficiency Mono rystafie solar panel 2.4V/.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10000 to 18000 mcd completed all as specified and directed

S & F in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed

S&F in repair "Sparkle road side delineators with tri colour reflector and 150mm wide reflectro radium sticker pasted over painted MS pipes approx 100mm dia and 100 cm long fixed in cement concrete bedding 150mmx150mmx300mm, 1:3:6 type C-1 (using 20 mm graded aggregate incl necessary earth work complete all as specified.