Upgradation of DC office, Udhampur. ( under NFB Distt Capex Budget 2026-27)

Providing,supplying and fixing PVC wall panelling including labour,carriage,tax etc complete as per engineer in charge

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both sideinclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centreto centre, one flange fixed to the ceiling with dash fastener 12.5 mm diax40mm long with 6 mm dia bolts, other flange of cleat fixed to the anglehangers of 25x10x0.5mm of required length with nuts & bolts of requiredsize and other end of angle hanger fixed with G.I. channels 45x15x0.9 mmrunning at the spacing of 1200 centre to centre, to which the ceilingsection 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5 mm at 450mm centre to centre, shall befixed in a direction perpendicular to G.I. intermediate channel withconnecting clips made out of 2.64mm diaX230 mm long G.I. wire at everyjunction, including fixing perimeter channels 0.5mm thick 27mm highhaving flanges of 20mm and 30 mm long, the perimeter of ceiling fixed towall/partition with the help of rawl plugs at 450 mm centre to centre, with25mm long drive-all screws @ 230 mm interval ,including fixing ofgypsum board/calcium silicate board to ceiling section and perimeterchannel with the help of dry wall screws of size 3.5x25mm at 230mm c/c,including jointing and finishing to a flush finish of tapered and squareedges of the gypsum board with recommended jointing compound,jointing tapes, finishing with jointing compound in 3 layers covering upto150mm on both sides of joint and two coats of primer suitable for boardall as per manufacturers’ specification and also including the cost ofmaking openings for light fittings, grills diffusers, cutouts made withframe of perimeter channels suitably fixed all complete as per drawing andspecification and direction of the Engineer-in-Charge but excluding the cost of painting wit 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095-Part 1 : 2011 (Board with BIS certification marks)

Providing and fixing LED lights 35watt 600x600mm

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.9.8.16 12 mm thick Fire retardant plywood conforming to IS: 5509

Providing and fixing ACP sheet 3-4mm thick all complete job as per directions of Engiineer In Charge

Providing and fixing MDF Board 18mm thick with CNC(Computer Cutting) Complete job as per directions of Engineer in Charge

Finishing MDF with DUCO paint using spray gun including primer,putty all complete job as per direction of engineer in charge

Providing 3 seater sofa

Providing Tempered glass side/corner table

Providing wooden table for office