Rehabilitation of berthing arrangement by using pontoon to facilitate tourist vessels near RGWS complex, plying between Aberdeen jetty to Subash Chandra Bose Island (Recall).

Amount

Shifting / towing of one number 100Ton cap. Steel pontoon (size: 20Mx9Mx2M) from PBHC (by manually clearing all fishing boats and other barges carefully without damaging any adjecent boats/ barges etc stationed at Phoenix bay berthing Stage-II and knuckle portion of jetty) to Aberdeen Jetty (RGWS) complex by suitable motor vessel and anchoring /positioning at the location with the C.C anchor blocks / M.S anchors holding with 20 mm dia wire rope at all four corners and diagonally and tieing with existing bollard block with 25 mm dia P.P.rope as directed by the EIC, including the hire charges of motor launch, cost of towing ropes, P.P rope, wire rope, wire grips, D shackles and all other required materials etc. complete, completing all port formalities, all labour charges, transit insurance, all taxes and duties, GST, Port dues, minor tools and plants etc. complete.

Fabrication of various components and fittings for pontoon jetty as per the requirement at site, the work including cutting and welding of steel strucutres for fabrication work, by using various sizes of M.S Rods, M.S.Angles, M.S Plate 8 mm, M.S.Channels, T-frame, G.I Pipe of 50 mm dia. for hand rails all around pontoon deck etc. as per the instructions of EIC. Removing all the dust and scales from the newly fabricated steel sections and applying one coat of Zinc chromate primer of approved quality and two coats of SE paint/Aluminum paint, wherever required as per the direction of EIC. The rate is including cost of different sizes of steel sections, G.I. Pipe 50 mm dia, cutting, bending etc. welders, gas cutters, fitters, semi skilled labours, unskilled labours, painters, gas, carbide, welding rods (IRS Approved Brand), tools and plants. hire charges of welding sets, gas plants, cost of primer, paints, brush and other consumables required, GST, Labour Welfare Cess etc., complete.

Collection of materials required such as C.C. Anchor blocks ( 0.500 to 1.00 Ton) / M.S Anchors (125Kg) etc. 4 Nos each from the ALHW Cell Complex, Phoenix Bay as per the requirement in connnection with pontoon jetty anchoring arrangement and other miscellanous works, including loading, transporting, unloading and placing at suitable location as per the direction of EIC, including cost of all labour charges for loading and unloading manually, hire charges of truck etc. complete.

Supplying & fixing of chain pulley block 3 ton capacity at existing structure, suitable for lifting the Aluminium gangway from the pontoon and lowering the gangway at the pontoon as and when required at Aberdeen Jetty, other miscellaneous required, two coat painting with Aluminium paint as directed by EIC. The rate is including the cost of all labour and materials such as Aluminium Paint, S.S Bolts and Nuts of various sizes, D Shackle 32 mm pin size, Wire Grips 32 mm dia, G.I. Chain 16 mm dia for Gang way, M.S. Hinges, Chain Pulley 3 Ton capacity, Pad Lock & Cardium Compound and other required materials if any to complete the work, GST and LWC etc complete.

Removing all the scale and rust, de-greasing the surface by pickling in dilute hydrochloric acid and thereafter attending painting to the 100 Ton Pontoon by applying one coat Zinc Phosphate primer and thereafter applying Two coat High Build Black paint over the external area above water level area and finish black and deck green paint (Marine quality) over the outer shells and deck plate, Towing post, Bollard etc. The rate is inclusive of all labour charges, primer, paint, painting materials, scaffolding materials, chipping hammer, wire brush and other T&P etc complete. the rate is including GST and LWC (Painting for Outer Side surface only).

Providing and fixing of accessories like old (U/S) truck tyre fenders all around the pontoon, hanging with required length G.I chain 16 mm and G.I D-shackle 12mm at suitable position as per the direction of EIC. The rate is including cost of U/S truck tyres, making 3 holes suitably in tyres, transporting, cost of G.I. chain 16mm, D-Shackles etc. or any other items required to complete the work, cost of all labour charges, making holes in each tyre, other T&P, GST and LWC etc. complete.

Providing and fixing of new Aluminium Gangway complying with IS code 10558:2013 certified by IRS/equivalent competant authority, to the pontoon, the size of Alu. gangway should not less than Length 10.00 Mtr. and width 1.00Mtr. The gangway should be supplied with all standard accessories and fittings as per the attached drawing and modifying / alteration as per requirement at site, including fixing of hand rails and required modification (if any), providing Steel rollers and bearing at pontoon side and hooks and pivot pin type arrangement at C.C step side as per the direction of EIC for safe emberkation/ dis emberkation of tourist/public. The rate is including cost of all items such as Alu. Gangway, transportation charges, hand rails, any modification required as per site condition, cost of all labour charges for making modification, other minor T&P, GST and LWC etc. complete.