REPAIRS AND MAINT OF MISC BR ASSETS EXCEPT SEWAGE SYSTEM FALLING UNDER ZONE-I OF GE BRICHGUNJ, SRI VIJAYA PURAM

Amount

Dismantling fencing wire mesh, any type complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

Dismantling of posts or struts (wood, steel or RCC) of any section along with old, unserviceable barbed wire, if any, including taking out embedded portion from ground and making good disturbed ground complete all as specified and as directed.

Excavation in post holes (or similar holes) each not exceeding 0.5 cum getting out in Hard/dense soil returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm watering and removing surplus soil to a distance not exceeding 50m and making good surfaces complete all as specified and as directed.

M&L for PCC 1:3:6 type C2(using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

M&L for Providing reinforced cement concrete type B-1, 1:2:4 (20mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc for fencing, average sectional area exc 100 Sq cm, but not exc 250 Sq cm with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in hard dense soil complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M & L for RCC- M -30 Design Mix as in columns, pillars, piers,posts and struts complete all as specified and directed.

Use & waste of Form work to sides of square or rectangular columns, pillars, posts and struts for fair finished surfaces of concrete complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F Mild steel TMT bars 5 to 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Supply only PVC coated (1mm thick) chain link fencing exc 2.00 but n.exc 3.50 kg per sqm with size of mesh 50 x 50 mm and thickness of wire n.exc 2.83 mm complete all as specified and directed.

Fixing only PVC coated chain link fencing including fixing of line wires any mesh, size and any type of standards, rails, straining bolts etc including provision of binding wires complete all as specified and as directed. Note:- Supply of MS line wire and flat iron bolt & nuts measured and paid seperately

Supply only 6mm dia wire PVC coated for support/line wire to chain link fencing complete all as specified and as directed.

S&F bars, flats etc as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F of mild steel angles, bars, flats etc as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F of mild steel bolts with hexagonal or square head one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 5 cm long n.exc 10 cm long dia metre of neck exceeding 11 to 15 mm complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410W(GdeE-250) quality B all as specified and as directed.

S & F MS Steel work in tubular trusses and tubular posts/ purlins including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to IS :1161-1979 grade st-240 including notching, drilling, fitting, riveting and/or welding or connecting with bed plate, bolt and nuts complete all as specified and as directed

S & F plates (Plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes with attachment etc and fixed by riveting or welding or with nut and bolts (including nut and bolts) conforming to Fe- 410-W Grade E- 250, quality B, complete all as specified and as directed.

Preparing new surfaces of iron and steel and applying one coat of redoxide zinc chrome primer and two coats of Epoxy anti- corrosive paint over 8 cm width or girth complete all as specified and as directed.

M&L for preparation of old steel surface and applying one coat of Epoxy anticorrosive paint over 8 cm width or girth complete all as specified and as directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil to a distance exceeding 250m but not exceeding 500m and depositing where directed. at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings in roof covering complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet, 0.5mm thickness, of colour as approved, having tensile strength of 550 Mpa as in roof coverings/cladding to wall, etc, fixed with & including self tapping screws on angle frame complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet, 0.5mm thickness, of colour as approved, having tensile strength of 550 Mpa as in roof coverings/cladding to wall, etc, fixed with & including self tapping screws on angle frame complete all as specified and directed.

S&F Plain, Aluminium sheeting 0.56mm thick, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed.

S&F 6mm thick polycarbonate sheet fixed with aluminium strips and coach screw and washer in roof wall etc and filling gaps with silicon complete all as specified and directed.

S&F 2mm thk Fibre glass reinforced translucent sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed.

M&L for 75mm thick cement concrete type D2, 1:4:8 (using 40mm graded stone aggregate) in sub base of flooring/hard standing,Path way all as specified and as directed.

M&L for 25mm thick cement concrete type B1,1:2:4 (using 20mm graded stone aggregate) finishing the surface even and fair complete all as specified and as directed.

Dismantling of floor, or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premishes complete all as specified and as directed.

M&L for Chequerred cement concrete tiles 300x300x25mm thick size set, jointed and pointed in neat cement slurry incl 15mm thick in CM 1:6 bedding layer of mortar complete all as specified and as directed.

M&L screed bed or bedding layer of mortar 20 mm thick cement plaster 1:4 for laying floor finished to receive floor tiles complete all as specified and as directed.

M&L for Endura Heavy duty Vitrified tiles of size 300x300x10 to12mm thick or high dimension (except thickness) of any colour any design durastone weather proof impacr resistant abrasion resistant exterior tiles as in floors etc set and jointed in neat cement slurry over and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand

M&L for providing cement concrete Type B1, 1:2:4 (using 20mm graded aggregate) as in kerb including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Pre-cast RCC slabs for covers over drains using Reinforced Cement concrete 1:2:4, type B1 (20 mm graded aggregate) set in cement mortar 1:4 all as specified and as directed.

Demolition of PCC Block walling built in CM 1:6 complete all as specified and as directed.

M&L for precast cement concrete solid block masonry with solid blocks using PCC 1:3:6, type C1 (using 20mm graded stone aggregate), exc. 10cm in width, set in CM 1:4 all as specified and as directed.

M&L PCC 1:2:4 type -B1 (using 20mm graded stone aggregate ) as in surface channaels and drain etc complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete complete all as specified and directed.

Taking down cement plaster of any desciption from wall (drain) including raking out joints hacking for key, scrubbing down with water etc, complete all as specified and directed

M&L for rendering 10mm thick in cement mortar 1:4 on fair faces of new brick work/block masonry or concrete surfaces finished fair and even complete all as specified and directed.

M&L 15mm thick cement plaster on fair faces of old PCC block work or concrete surfaces in CM (1:4) and finished even and fair without using extra cement, complete all as specified and directed.

M&L cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate in coping of wall as complete all as specified and directed.

S&F in repair galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm specing and straining and fixing to any type of standard rail straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed (Each line wire to be measured).

M&L Preparation of newly plastered surfaces of wall & applying Two or more coatsof 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M & L for Two coat of wheather proof exterior acrylic emulsion paint with anti fungal property on old painted wall surfaces including preperation of surfaces all as specified and directed.

S&F in repair for providing and fixing stainless steel (Grade 316) railing made of hollow tubes , channels , plates, chain etc incl welding, grinding, buffing , polishing, and making curvature(wherever required) and fitting the same with necessary SS nuts and bolts complete , incl fixing the railing with necessary accessories and SS - fasteners, SS bolts ,etc of required size on the top of floor or the side of waste slab with suitable arrangement all as designed complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed to walls, 110mm bore complete all as specified and directed.

M&L for Fibreglass reinforced plastic (FRP), corrosion resistant drain covers of any size and any shape including frames as directed by Engineer-in-Charge having loading capacity from 2.5-6.0 Tons including key holes/keys to facilitate the lifting and placement of drain covers in the frame complete all as specified and as directed.

M&L for preparation of old concrete Surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of plastic emulsion paint compete all as specified and as directed.

M&L for preparation of new or previously untreated concrete Surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of plastic emulsion paint over a coat of primer compete all as specified and as directed.

S&F Aqua star compact UPVC Rainwater gutter 160mm, capacity 11Ltr/Mtr including aqua star compact bracket with extension rain water accessories complete all as specified and as directed.

M/s Prem Enterprise (BID ID -3303825)

Bismi Builders & Enterprises (BID ID -3303860)

M/s Kamal Electrical (BID ID -3303893)

Nirman Construction Company (BID ID -3303916)

CHANDER SEKER ENTERPRISE (BID ID -3304161)

RPG AND COMPANY (BID ID -3304188)

Sri Ram Construction (BID ID -3304211)