Construction of Anganwadi Building at Vadakadal in Venmankondan Panchayat of T.Palur Block in Ariyalur District under AGAMT II 2023-24

Amount

Earthwork excavation for foundation in all soils and sub-soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth

Construction of Embankment / Subgrade using Carted earth, consolidating the same using powe roller of capacity 8-10 M.t including conveyance charges and all labour charges etc., complete

Supplying and filling in foundation and basement with filling sand in layers not more than 15cm thick well rammed, watered and compacted complete complying with standard specification

Cement concrete 1:4:8 mix (one cement four sand and eight hard broken stone) using 40mm ISS HBG metal for foundation including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing, etc., complete as per standard specification

Brickwork in Cement Mortar 1:5 mix using country bricks of standard size including cost and conveyance of all materials to work site and all labour charges etc., complete

Supplying and erecting steel centering for sides and soffits etc complete complying with standard specifications

Supplying and erecting steel centering for sides and soffits etc complete complying with standard specifications (Roof Beam & Slab)

Supplying and fabrication of steel including cost and conveyance of steel to site and all labour charges for straightening, cutting to length, bending to shape and tying in position and forming grills for all R.C.C works

Reinforced Cement concrete 1:1.5:3 mix using 20mm ISS HBG metal from approved sources including cost and conveyance of all materials to work site and all labour charges for mixing, laying, and watering etc., complete.

Weathering course concrete using best quality broken brick jelly of 20mm size in pure slaked lime (no sand to be used) over the Rcc Roof slab in theproportion of brickjelly to lime being 32:12.5 by volume and laid over in a single layer in the consolidated finished thickness, beating the concrete with wooden beaters of approved pattern keeping the surface constantly wetted by sprinkling live jaggery water as per standard specifications.

Finishing the top of roof with one course of machine pressed tiles of size 20x20x2cm of approved quality laid in C.M. 1:3 mix 12mm thick mixed with water proofing compound confirming to ISS by 2% of weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar, Red oxide etc., complete. Complying with standard specifications

Plastering in Cement Mortar 1:5 mix, 12mm thick including cost and conveyance of all materials to work site and all labour charges etc., complete.

Plastering in Cement Mortar 1:3 mix, 10mm thick including cost and conveyance of all materials to work site and all labour charges etc., complete.

Paving the floor with scratch proof vertified Tiles of any colour and any size laid in cement mortar 1:3 (one cement and three sand) 20mm thick and pointing with white cement using 0.4Kg/Sq.m. mixed with colouring pigments to suit the colour of the tiles including finishing the joints neatly complying with standard specification and as directed by departmental officers.

Dadooing walls with glazed tiles of any colour and any size laid in C.M.1:2 mix 10mm thick and pointing with cement using 0.40kg/1sqm mixed with colouring pigments to suit the colour f the tiles including finishing the joints neatly complying with standard specifications.

White washing two coats using shell lime including cost and conveyance of all materials to site and all labour charges etc, comoplete

Distembering two coats with best approved colour with Priming Coat over the new plastered surface including cost and conveyance of all materials to site and all other labour charges etc complete

Painting the newly plastered wall surface with two coats of Exterior Emulsion over one coat of cement primer including clearing the surface in all floors etc., complete as per standard specification

Painting two coats over new iron works with ready mix paint of approved colour and trade including cost and conveyance of all materials and all other labour charges etc., complete.

Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) .

Paving the flooring withPaver block laid over, interlocking blocks including cost and conveyance of all materials to site and all labour charges, etc., complete for 60mm thick

Cost and Supply of Steel Door of size 0.90x2.10m

Cost and Supply of Glazed Ventilator of size 0.90x0.45m

Cost and Supply of RCC Jolley of size 0.90x0.45m

Cost and Supply of Steel Door of size 0.75x1.20m

Cost and Supply of Steel Window of size 1.20x1.30m

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (4 points per coil) (SD.No.17)

Supply and fixing of single box type 4'40W fluorescent fitting complete with copper choke and condensor with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals to the fitting with tube (SD.No.89)

Wiring with 2 x 1.5 sq.mm (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point (SD.No.36)

Supply and fixing of WT bulk head fitting with guard suitable for 11W CFL lamp with CFL (SD.No.83)

Supply and run of 2 of 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains (SD.No.66)

Supply and run of 2 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') bent at both ends with necessary angle iron up right and end supports for mains (SD.No.71)

Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit (SD.No.125)

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") (SD.No.106)

Cost and Supply of Cuddapah slab of 50mm thick including cost and conveyance of all materials to work site and all labour charges etc., complete.

Supplying & Fixing in position of Indian type Water closet 580x440mm of approved quality including cost and conveyance of all materials to work site and all labour charges etc., complete.

Supplying & Fixing in position Europeon Water Closet with all fittings and 10 lit capacity flusing tank

Supplying and Fixing inposition of best quality make White glazed wash basin of size 550x 400mm including cost and conveyance of all materials to work site and all labour charges etc., complete.

Cost and Supply of 500 litre Capacity Sintex tank including cost and conveyance of all materials work site and all labour charges etc., complete.

Supplying, Laying and jointing PVC Pipes and Specials as directed by the departmental officers

110mm rainwater pipe (6Kg/cm2)

20mm PVC Finolex pipe (6Kg/cm2)

20mm PVC Elbow

20mm PVC Tee

20mm PVC Tap

20mm PVC Gatevalve

Provision for Name board

Provision for Arts Painting

Provision for Rainwater harvesting

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for this work}

Krishna and Co