Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.2 LAccepted-AOC | ₹2.2 L | L1 | Accepted-AOC L1 |
| 2 | L2₹2.3 LRejected-Finance | ₹2.3 L | L2 | Rejected-Finance L2 |
| Sl No | Description | Qty | Unit | THE S&R GROUP CO-OP L/C SOCIETY LTD KAITHAL L1 | The Saurav Chowdhary Cooperative Labour and Construction Society Limited L2 |
|---|---|---|---|---|---|
| 1.00NS Itmes | |||||
| 1.01 | Air Swing:
Providing, designing and fixing of airs swinging pair of
size 1150x900x1250 mm fabricated with main post of
140mm dia and 3.00 mm thick and other pipes of 40mm
dia 3.00 mm thick all pipes made up of hot rolled tubular
MS pipe and powder coated using Akzo Nobel or
equivalent of 80-120 micron thick. All welding joints of
pipe are well welded with joints scalloped as necessary
and dressed off removing sharp edges and burrs. Zinc
primer paint to be applied at all welding points prior to
finishing. Seat and Base plate cover shall be made up
of virgin LLDPEmanufactured by rotational moulding
with minimum thickness of plastic 4.00mm, colourful
and UV resistant environmental friendly.Bearing used
shall be maintained free, duly oiled sealed and
selflubricated made by reputed company to be
approved by Engineer-in-Charge. Equipment to be
fitted within built limiters to prevent unwanted
movements. All open ends of pipe to be coloured by
GI/LLDPE caps for user safety. The equipment to be
fixed on ground with concrete of minimum strength M25
and J shaped welded bolts and once the concrete is set,
Each 14000.00
fix the equipment on to it and cover nuts andbolts with
the base plate cover, all complete as per direction and
approval of Engineer-in-Charge regarding material,
shape of equipment, colour on metal, seat and base cover
plate and fixing of equipment etc | 1 | Each | 9,900 ₹9,900 | 11,500 ₹11,500 |
| 1.02 | Pull Chair:
Providing, designing and fixing of Pull pair of size 2500
X 800 X 2000 mm fabricated with main post of 140mm
dia and 3.00 mm thick and other pipes of 40mm dia
3.00mm thick all pipes made up of hot rolled tubular steel
and powder coated using Akzo Nobel or equivalent of
80-120 micron thick. All welding joints of pipe are well
welded with joints scalloped as necessary and dressed off
removing sharp edges and burrs. Zinc primer paint to be
applied at all welding points prior to finishing. Handle
bars are to be provided with high quality grip rubber
at top end. Padals shall be made up of Nylon alloy with
rounded edge of prevent any impact of injury and seat to
be made from virgin LLDPE manufactured by rotational
moulding with minimum thickness of plastic 4.00mm,
colourful and U V resistant environmental friendly.
Bearing used shall be maintenance free, duly oiled sealed
and self lubricated made by reputed company to be
approved by Engineer-in-Charge. Equipment to be fitted
within built limiters to prevent unwanted movements. All
open ends of pipe to be coloured by GI/LLDPE caps for
user safety. The equipment to be fixed on ground with
concrete of minimum strength M25 and J shaped welded
bolts and once the concrete is set, fix the equipment on to
it and cover nuts and bolts with the base plate cover, all
complete as per direction and approval of Engineer-inCharge regarding material, shape of equipment colours
on metal, seat and base cover plate and fixing of
equipment etc | 2 | Each | 10,900 ₹21,800 | 12,500 ₹25,000 |
| 1.03 | Abb Trainer/Sit Up Brench:
Main Post-114mm
Pipe Size- 2’’x4’’
Thickness pipe- 3mm
Pipe standard: GP
Paint -Powder coating only
Post caps- Aluminium/LLDPE
Screws other- Nylon lock bolt
Material Mild Steel
Each 12000.00
Holding Capacity 120 kg
Age Group 13 years plus
All joint shell be lubricated made by reputed company
and powder coated using Akzo Nobel or equivalent of
80-120 micron thick. All welding joints of pipe are well
welded with joints scalloped a necessary and dressed off
removing sharp edges and burresto be approved by
Engineer-in-Charge. Equipment to be fitted within built
limiters to prevent unwanted movements. All open ends
of pipe to be coloured by GI/LLDPE caps for user safety.
The equipment to be fixed on ground with concrete of
minimum strength M25 and J shaped welded bolts and
once the concrete is set, fix the equipment on to it and
cover nuts and bolts with the base plate cover, all
complete as per direction and approval of Engineerin-Charge regarding material, shape of equipment,
colour on metal, seat and base cover plate and fixing of
equipment etc. | 2 | Each | 13,200 ₹26,400 | 10,500 ₹21,000 |
| 1.04 | Double cross walker:
Pipe- structure made of Apollo Brand B CLASS GI. Pipe OF
114 mm OD 42 mm OD And 32 mm OD
Connecting Pipe –Made of Apollo Brand B CLASS GI. Pipe
OF 32 OD.
Handle Frame - Made of Apollo Brand B CLASS GI. Pipe OF
42 OD.
Handle Grip - Made of food Graded Rubber
Bearing – Ball bearing 6205zz
Bearing Caps - Made up of HDPE Material 62 mm
Seats- Made of HR Sheet OF 2 mm Thickness.
Pole Caps – Made up of HDPE Material.
Flanges – 8 mm Thick
Powder Coated (Thickness 90 micron) | 2 | Each | 8,900 ₹17,800 | 9,500 ₹19,000 |
| 1.05 | CYCLE:
Pipe- structure made of GI. Pipe (IS1239-2004) OF 4” OD 42
OD AND 32 OD OF 3 to 4 mm thickness
Arm – structure made of GI pipe 32 OD 4 mm thickness.
Bearing – Ball bearing
Foot Rest - structure made of M.S. SHEET OF 2 mm
Thickness.
Bearing Caps - Made up of HDPE Material.
Seats- structure made of M.S. SHEET OF 3 TO 4 mm
Thickness.
Pole Caps – Made up of HDPE Material.
Paint – Powder Coated (Thickness 90 micron) | 1 | Each | 9,200 ₹9,200 | 9,500 ₹9,500 |
| 1.06 | LEG PRESS:
Center main pipe114mm. B class
(3mm to 3.5mm. thickness)
2. Sitting pipe 40mm.B class(3mm to 3.5mm. thickness)
3. Both side vertical structure pipe 40mm.
4. Seat metallic sheet 3mm to 3.5mm. M.S
5. Footrest M.S Checked plate 4mm. thickness
6. Permanent lubricated sealed bearing of reputed brand.
7. Nuts and Bolts Galvanized.
8. Nylon covers for covering the nuts and bolts | 1 | Each | 10,900 ₹10,900 | 13,000 ₹13,000 |
| 1.07 | PARALLEL BAR:
Material GI
Finish Powder Coated
Product Area 1828 x 685 x 1524 mm
Safe Play Area 2438 x 1220 mm
Handle Frame 38 mm OD G.I. pipe
Each 7000.00
• Parallel Bar made up of 2inch B class GI pipe: Prime Stand
duly bend, Foundation center pipe.
• All welded joint are of good quality.
• High tensile steel with galvanized nut and bolts to be used.
• The powder coating done with Pure polyester powder with 60
to70 micron thickness. | 1 | Each | 6,800 ₹6,800 | 6,800 ₹6,800 |
| 1.08 | PUSH UP BAR:
Minimum Order Quantity 1 Piece
Usage/Application Only For Outdoor Use
Material GI, Mild Steel
Automation Grade Manual
Dimension 3900 X 1450 X 2350 mm
Max. User Weight 110 Kg
Pipe Dimension – Main Post 140mm dia and other post
40mm dia.
All joint shell be lubricated made by reputed company to
be approved by Engineer-in-Charge. Equipment tobe
fitted within built limiters to prevent unwanted
movements. All open ends of pipe to be coloured by
GI/LLDPE caps for user safety. The equipment to be
fixed on ground with concrete of minimum strength M25
and J shaped welded bolts and once the concrete is set,
fix the equipment on to it and cover nuts and bolts with
the base plate cover, all complete as per direction and
approval of Engineer-in-Charge regarding material,
shape of equipment, colour on metal, seat and base cover
plate and fixing of equipment etc | 1 | Each | 10,900 ₹10,900 | 12,000 ₹12,000 |
| 1.09 | 3. Twister :-Providing, designing and fixing Twister of size 1700 X1300 X 1300 mm fabricated 2`x4` rectangular hollow MS pipe and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zine primer paint to be applied at all welding points prior to finishing. Handlebars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer- in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE: caps for user safety. The equipment tobe fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. | 1 | Each | 7,300 ₹7,300 | 7,850 ₹7,850 |
Tender Value
₹2.9 L
EMD Value
₹5,880
Closing Date
29 Dec 2025, 10:00 amClosed
RAMESH CHANDER
sdopr Kaithal
Construction and Installation of Open Gym in Malikpur Road Park at Village Khurana
2025_HRY_492605_1
20250AA204E4 5F35 4CF8 BDB9 B3B29D23464D2136DEV
Open Tender
Civil Works
160 days
KHURANA
Construction and Installation of Open Gym in Malikpur Road Park at Village Khurana
2 documents required · 2 mandatory
₹500
₹5,880
Yes
21 Jan 2026
24 Dec 2025
30 Dec 2025
24 Dec 2025
29 Dec 2025
24 Dec 2025
Air Swing: Providing, designing and fixing of airs swinging pair of size 1150x900x1250 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00 mm thick all pipes made up of hot rolled tubular MS pipe and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat and Base plate cover shall be made up of virgin LLDPEmanufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and UV resistant environmental friendly.Bearing used shall be maintained free, duly oiled sealed and selflubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, Each 14000.00 fix the equipment on to it and cover nuts andbolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc
Pull Chair: Providing, designing and fixing of Pull pair of size 2500 X 800 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-inCharge regarding material, shape of equipment colours on metal, seat and base cover plate and fixing of equipment etc
Abb Trainer/Sit Up Brench: Main Post-114mm Pipe Size- 2’’x4’’ Thickness pipe- 3mm Pipe standard: GP Paint -Powder coating only Post caps- Aluminium/LLDPE Screws other- Nylon lock bolt Material Mild Steel Each 12000.00 Holding Capacity 120 kg Age Group 13 years plus All joint shell be lubricated made by reputed company and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped a necessary and dressed off removing sharp edges and burresto be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineerin-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.
Double cross walker: Pipe- structure made of Apollo Brand B CLASS GI. Pipe OF 114 mm OD 42 mm OD And 32 mm OD Connecting Pipe –Made of Apollo Brand B CLASS GI. Pipe OF 32 OD. Handle Frame - Made of Apollo Brand B CLASS GI. Pipe OF 42 OD. Handle Grip - Made of food Graded Rubber Bearing – Ball bearing 6205zz Bearing Caps - Made up of HDPE Material 62 mm Seats- Made of HR Sheet OF 2 mm Thickness. Pole Caps – Made up of HDPE Material. Flanges – 8 mm Thick Powder Coated (Thickness 90 micron)
CYCLE: Pipe- structure made of GI. Pipe (IS1239-2004) OF 4” OD 42 OD AND 32 OD OF 3 to 4 mm thickness Arm – structure made of GI pipe 32 OD 4 mm thickness. Bearing – Ball bearing Foot Rest - structure made of M.S. SHEET OF 2 mm Thickness. Bearing Caps - Made up of HDPE Material. Seats- structure made of M.S. SHEET OF 3 TO 4 mm Thickness. Pole Caps – Made up of HDPE Material. Paint – Powder Coated (Thickness 90 micron)
LEG PRESS: Center main pipe114mm. B class (3mm to 3.5mm. thickness) 2. Sitting pipe 40mm.B class(3mm to 3.5mm. thickness) 3. Both side vertical structure pipe 40mm. 4. Seat metallic sheet 3mm to 3.5mm. M.S 5. Footrest M.S Checked plate 4mm. thickness 6. Permanent lubricated sealed bearing of reputed brand. 7. Nuts and Bolts Galvanized. 8. Nylon covers for covering the nuts and bolts
PARALLEL BAR: Material GI Finish Powder Coated Product Area 1828 x 685 x 1524 mm Safe Play Area 2438 x 1220 mm Handle Frame 38 mm OD G.I. pipe Each 7000.00 • Parallel Bar made up of 2inch B class GI pipe: Prime Stand duly bend, Foundation center pipe. • All welded joint are of good quality. • High tensile steel with galvanized nut and bolts to be used. • The powder coating done with Pure polyester powder with 60 to70 micron thickness.
PUSH UP BAR: Minimum Order Quantity 1 Piece Usage/Application Only For Outdoor Use Material GI, Mild Steel Automation Grade Manual Dimension 3900 X 1450 X 2350 mm Max. User Weight 110 Kg Pipe Dimension – Main Post 140mm dia and other post 40mm dia. All joint shell be lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment tobe fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc
3. Twister :-Providing, designing and fixing Twister of size 1700 X1300 X 1300 mm fabricated 2`x4` rectangular hollow MS pipe and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zine primer paint to be applied at all welding points prior to finishing. Handlebars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer- in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE: caps for user safety. The equipment tobe fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.
Bridge Ladder :- Product type Playing Colour Your choise Size 10’feet Material Iron Customized Yes Age Group 8 to 20 Size 2.0 X2.0 X mtr/3.0 Mtr. All joint shell be lubricated made by reputed company and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped a necessary and dressed off removing sharp edges and burrsto be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GIALLDPE caps for user safely. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.
5. SEE Saw :- Product type Playing Material Mild steel Size 6 Feet Age group up to 12 Seating 2 seater All Joint shall be lubricated made by reputed company and powder coated using Akzo or equipment of 80-120 micron thick. All welding joints of pipe are well welded with jointed scalloped a necessary and dressed off welded with joints scalloped a necessary and dressed off removing sharp edge and burrsto be approved by Engineer in charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPWE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cove nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer in Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.
Percentage BoQ
BoQ_Ver3.0
Name of the Bidder/ Bidding Firm / Company :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )
NUMBER #
Construction and installation of open gym in malikpur road park at village khurana
HSR Rate
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.72 MB
BOQ_570933.xls
BOQ • 0.31 MB
AD0144063.pdf
Additional Documents • 0.58 MB
Download all tender documents and submit your bid