Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹69,222Accepted-AOC CHANDIGARH | ₹69,222 Quoted ₹69,222.01 | L-1 | Accepted-AOC Allotment |
| 2 | L-2₹71,501.28Rejected-Finance CHANDIGARH | ₹71,501.28 | L-2 | Rejected-Finance due to higher |
Tender Value
₹84,417
EMD Value
₹1,688
Closing Date
28 Jan 2026, 11:00 amClosed
Executive Engineer, C.P. Division No.4, Chandigarh
Executive Engineer, C.P. Division No.4, Chandigarh
Conversion of Garage into Camp Office House No.2527 (Type-5) Sector-27, Chandigarh
2026_CHD_90171_1
CP4/2026/2538722
Open Tender
Civil Works
30 days
Conversion of Garage into Camp Office House No.252
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹1,688
18 Feb 2026
20 Jan 2026
28 Jan 2026
20 Jan 2026
28 Jan 2026
20 Jan 2026
Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats) (As per DSR 13.81.1)
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (As per DSR 13.91)
Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (One or more coat applied @ 0.90 ltr/10 sqm). (As per DSR 13.111.2)
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand) (As per DSR 13.2.1)
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (As per DSR 15.56)
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (As per DSR 15.60)
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) (As per DSR 6.4.1)
Renewing glass panes, with wooden fillets wherever necessary::Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) (As per DSR 14.6.1)
12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) (As per DSR 13.1.2)
Preparation of plastered or concrete surfaces for oil bound distemper or emulsion or apex paint including sand papering the surface or scrapping by patti, applying filling with cement based putty (Birla, Jk or equivalent) to the required finish complete in all respect and to the entire satisfaction of Engineer-in-charge. (N.S.)
Dismantling of ceramic tiles and plaster to making the surface clean for refixing the glazed tiles including removing of malba complete in all respect and to the entire satisfaction of the Engineer in charge. (N.S.)
Providing and laying vitrified floor tiles of specified size 600x600 mm single charge (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved brand and manufacture, in all colours and shades,The tiles are to be fixed with 3mm grove using spacers, The tiles are to be laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm The groves are to be filled with cementious grout mix with prportion of 0.90 kg grout and 0.10 kg of hardner for each kg of Filling material . Single Charge vitrtified Tile of size 600x600 mm (N.S.)
Providing and laying vitrified floor tiles of specified sizes (thickness to be specified by the manufacturer) of 1st quality with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, in skirting, The tiles are to be fixed with 3mm grove using spacers, The tiles are to be laid on 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm The groves are to be filled with cementious grout mix with prportion of 0.90 kg grout and 0.10 kg of hardner for each kg of Filling material . Single Charge vitrtified Tile of size 600x600 mm (N.S.)
Providing and fixing golden champ wood chowkhat (kiln seasoned) 4 1/2" x 2 1/4"including cost of corner straps, iron hold fasts, hinges, screws,nails, fevicol etc. and painting two coats of wood preserver to sides of chowkhats. Rate includes the cost of dismantling of all damaged chowkhats and making good the damage to walls plaster and floors as required including, disposal of rubbish to the dumping ground the rate further includes the cost of painting two coats synthetic enamel paint over one coat of wood primer complete in all respect and to the entire satisfaction of Engineer-in-Charge (N.S.)
Providing and fixing 35mm thick golden champ wood (kiln seasoned) glazed window shutter with vertical style & rails 75mm thick & 4mm thick glass fixed with 1/2” x 3/4” beading and including 2 Nos. of 3” hinges ISI marked, 1no. aluminium handle, 2 no. tower bolt 4" complete in all respect and to entire satisfaction of Engineer-in-charge. (N.S.)
Providing and fixing 35mm thick phenol bounded factory manufactured solid flush door shutter ISI marked with both side commercial face in the existing chowkhat. The rate includes the cost of 03 nos. MS hinges 4", all necessary aluminium fittings i.e. 02 nos. aluminium handle 5" ISI marked , 01 nos. tower bolt 8", 01 nos. tower bolt 6", 01 nos. door stopper (twin rubber & stopper), 01 nos. sliding bolt 10" and painting two coats over one coat of primer after preparation of surface (special quality) complete in all respect to the entire satisfaction of Engineer-in-charge. (N.S.)
Providing and fixing cupboard shutter consisting of 19mm thick commercial board (Archid, Novapan, Kitply, National make) phenol bonded fixed including cost of 2 no. aluminium handle 4'', 2 no. aluminium tower bolt 4'', screws, nails, fevicol, and two coats of special quality paint over one coat of primer after preparation of ply wood surface complete in all respect to the entire satisfaction of Engineer-in-Charge. (N.S.)
Providing and fixing 35mm thick golden champ wood (kiln seasoned) wire gauge window shutters consisting of vertical and horizontal styles 75x35mm size with wire mesh 22 x 12 mm gauge fixed with 1/2"x3/4" golden champ wood (kiln seasoned) beading. The rate further includes the cost of 3" hinges, Aluminium tower bolts 4", Aluminium handles 1 nos., I-hook and two coats of special quality enamel paint over coat of primer after preparation of surface (special quality) complete in all respect to the entire satisfaction of Engineer-in-charge. (N.S.)
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.09 MB
BOQ_110271.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid