Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.7 LAccepted-AOC RONALDSAY ROAD JOYMAGAR BUS STAND AGARTALA WEST TRIPURA | AGARTALA | WEST TRIPURA | TRIPURA | L1 | Accepted-AOC Reasonable rate | |
| 2 | L2₹20.5 L+₹2.8 L (15.8%)Rejected-Finance | L2 | Rejected-Finance Quoted amount higher than L1 | |
| 3 | L3₹20.7 L+₹3.0 L (17.1%)Rejected-Finance | L3 | Rejected-Finance Quoted amount higher than L1 | |
| 4 | L4₹21.8 L+₹4.1 L (23.3%)Rejected-Finance BHATI ABHOYNAGAR WEST VIVEKANANDA CLUB ROAD NEAR HOUSE OF DOCTOR GOURISHANKAR CHAKRABORTY P O AGARTALA TRIPURA WEST PIN 799001 | AGARTALA | WEST TRIPURA | TRIPURA | 799001 | L4 | Rejected-Finance Quoted amount higher than L1 |
Tender Value
₹19 L
EMD Value
₹38,000
Closing Date
27 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col N K Chaudhary
HQ 137 Wks Engr PIN 914137 c/o 99 APO
SPECIAL REPAIR REPLACEMENT OF VARIOUS CAPACITY DG SET AGAINST BER AT MILITARY STATION AGARTALA
2024_MES_643157_1
8863/E8
Open Tender
Civil Works
Item Rate
120 days
Agartala
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
AGE (I) Agartala
₹38,000
Yes
23 Apr 2024
19 Feb 2024
3 Apr 2024
19 Feb 2024
27 Mar 2024
13 Mar 2024
Amount
Excavating in trenches, n exec 1.5 m wide and n exec 1.5 m depth , for foundation ,etc or for shafts ,wells, cesspits, manholes, pier holes ,etc n exec 10 sq m on plain and n exec 1.5 m in depth and getting out soft or loose soil complete all as specified and as directed.
Returning, filling in, including spreading,leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed.
Removing excavated material not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.
Materials and labour for sand filling around the cable with approved quality coarse sand for sand cushioning of Under ground cable including spreading and punning down to desired thickness complete all as specified and as directed. (Note: Punned thickness shall be measured for payment purpose)
Material and labour for well burnt subclass 'B' bricks laid flat width wise along the length of cable for cable protection complete all as specified and as directed.
Materials and labour for Cutting hard standing/road not exceeding 1.5m deep for laying and removal of LT UG cable/protection pipe including making good so as to match with the existing finishes including 100mm thick PCC (1:3:6) type C2, using 40mm graded coarse aggregate on top and removal of debris and making the damaged areas uniform to the sorroundings complete all as specified and directed .
Supply, installation & commissioning of silent type Diesel Engine driven (Primemover) coupled with alternator with manual control panel, compact, robust and rugged design, Low emission, high efficiency engines suitable for 30 KVA , 415 Volt, 3 Phase, 4 wire , coolant cooled , electronic governor, ISO 3046, BS 5514 rated for continuous running diesel engine suitable to develop BHP complete with and including following accessories:- (i) Fuel filter (ii) Governor (iii) Complete battery set 12/24V with lead & lugs as recommended by manufacturer (iv) Lubricant oil cooler (v) Lubricant oil pump (vi) Lubricant oil filter (vii) Digital oil pressure guage (viii) Battery carging alternator of suitable capacity (ix) Dry type air filter (x) MS channel fabricated frame rigidly welded suitable for receiving the diesel engine and alternator and anti vibration pads.
(xi) Coupling guard (xii) Exhaust pipe fully extended to exhaust gases outside the generating room including silencer and necessary insulation lagging with minimum 12mm dia asbestos rope. (xiii) Fuel tank of suitable capacity and shall be provided in side canopy . (xiv) Digital RPM meter with hour meter (xv) Turbo charger (xvi) Fuel injection pump (xvii) Digital coolant temp gauge (xviii) Self starter with auto electric start accessories (xix) Engine safety alarm low lubricant oil pressure and high coolant temperature (xx) Operating manual (xxi) Test certificate Note:- CPCB-II GOVT NORMS APPLICABLE.
(c) Acoustic enclosure: Supply & install of Acoustic Enclosure suitable for 30 KVA DG Set as under:- (i) Fabricated out of CRCA sheet of suitable thickness as per manufacture design, Polyster based powder coated internally and externally with lockable type door handle. All nuts and handles shall be zinc coated. (ii) The doors are gasketed with EPDM gaskets (iii) Sound proofing with high quality rock wool/mineral wool confirming to IS-8183 of 50mm tickness and density at 96 Kg/cubic metre covered wit fiber glass cloth and perforated powder coats sheet specially designed allenuators (sound controller) at air entry and exit of the container noise level shall not be exceed 75 DBA at 1 meter distance as per CPCB norms. (iv) Adequate ventilation to meet air requirement for combustion and heat removal with provn of a blower. (v) Emergency stop push button out side te container. (vi) Provn of light inside the canopy providing LED Lamp/TL of 20 watt with wiring and control switch. (vii) Sufficient space should be available around the Generator set for inspection and service.
(d) Mounting Arrangment: Prime mover and alternator shall be mounted on skid mounting type base frame fabricated from ISMC channel or in sheet metal providing common bed for engine and alternator directly coupled together the base frame has provn for grouting on foundation bolt as well as fixing on vibration mounts provn is made in base frame for tilting arrangment of DG set as recommended by manufacturer the base frame shall have provn for mounting of acqoustic enclosure. The base frame to have provn of lifting hook for convenient lifting of complete set i.e. along the canopy engine and alternator.
(e) Manual control Panel : The control Panel shall be made of 16 SWG CRCA sheet, floor mounted, indoor type, dust and vermin proof and powder coated and suitable for 415 volt, 3 phase, 50 HZ system. The panel shall consist of the following features : (i) Engine parameters display : Low lube oil pressure, High water temp, Baterry voltage, RPM, No. of Hours Run. (ii) Engine Fault Indication for : LLOP/HWT/Low fuel level/Over speed/ Emergency stop/Charging alternator/V-Belt failure/Service due. (iii) Push button for engine Start/Stop, Data scrolling button & Reset button. (iv) Alternator parameters display : Voltage, Ampere, Frequency. (v) Alternator protections : Over/Under Voltage, over current, over/under frequency. (vi) Suitable rated MCB. (vii) Current Transformers of suitable ratio. (viii) Earth Studs.
Supply, installation & commissioning of silent type Diesel Engine driven (Primemover) coupled with alternator with manual control panel, compact, robust and rugged design, Low emission, high efficiency engines suitable for 50 KVA , 415 Volt, 3 Phase, 4 wire , coolant cooled , electronic governor, ISO 3046, BS 5514 rated for continuous running diesel engine suitable to develop BHP complete with and including following accessories:- (i) Fuel filter (ii) Governor (iii) Complete battery set 12V with lead & lugs as recommended by manufacturer. (iv) Lubricant oil cooler (v) Lubricant oil pump (vi) Lubricant oil filter (vii) Digital oil pressure guage (viii) Battery carging alternator of suitable capacity (ix) Dry type air filter (x) MS channel fabricated frame rigidly welded suitable for receiving the diesel engine and alternator and anti vibration pads. (xi) Coupling guard
(xii) Exhaust pipe fully extended to exhaust gases outside the generating room including silencer and necessary insulation lagging with minimum 12mm dia asbestos rope. (xiii) Fuel tank of suitable capacity and shall be provided in side canopy. (xiv) Digital RPM meter with hour meter (xv) Turbo charger (xvi) Fuel injection pump (xvii) Digital coolant temp gauge (xviii) Self starter with auto electric start accessories (xix) Engine safety alarm low lubricant oil pressure and high coolant temperature (xx) Operating manual (xxi) Test certificate Note:- CPCB-II GOVT NORMS APPLICABLE.
(c) Acoustic enclosure: Supply & install of Acoustic Enclosure suitable for 50 KVA DG Set as under:- (i) Fabricated out of CRCA sheet of suitable thickness as per manufacture design, Polyster based powder coated internally and externally with lockable type door handle. All nuts and handles shall be zinc coated. (ii) The doors are gasketed with EPDM gaskets (iii) Sound proofing with high quality rock wool/mineral wool confirming to IS-8183 of 50mm tickness and density at 96 Kg/cubic metre covered wit fiber glass cloth and perforated powder coats sheet specially designed allenuators (sound controller) at air entry and exit of the container noise level shall not be exceed 75 dBA at 1 meter distance as per CPCB norms. (iv) Adequate ventilation to meet air requirement for combustion and heat removal with provn of a blower (v) Emergency stop push button out side te container. (vi) Provn of light inside the canopy providing LED Lamp/TL of 20 watt with wiring and control switch (vii) Sufficient space should be available around the Generator set for inspection and service.
(d) Mounting Arrangment: Prime mover and alternator shall be mounted on skid mounting type base frame fabricated from ISMC channel or in sheet metal providing common bed for engine and alternator directly coupled together the base frame has provn for grouting on foundation bolt as well as fixing on vibration mounts provn is made in base frame for tilting arrangment of DG set as recommended by manufacturer the base frame shall have provn for mounting of acqoustic enclosure. The base frame to have provn of lifting hook for convenient lifting of complete set i.e. along the canopy engine and alternator
(e) Manual control Panel : The control Panel shall be made of 16 SWG CRCA sheet, floor mounted, indoor type, dust and vermin proof and powder coated and suitable for 415 volt, 3 phase, 50 HZ system. The panel shall consist of the following features : (i) Engine parameters display : Low lube oil pressure, High water temp, Baterry voltage, RPM, No. of Hours Run. (ii) Engine Fault Indication for : LLOP/HWT/Low fuel level/Over speed/ Emergency stop/Charging alternator/V-Belt failure/Service due. (iii) Push button for engine Start/Stop, Data scrolling button & Reset button. (iv) Alternator parameters display : Voltage, Ampere, Frequency. (v) Alternator protections : Over/Under Voltage, over current, over/under frequency. (vi) Suitable rated MCB. (vii) Current Transformers of suitable ratio. (viii) Earth Studs.
Supply, and Laying of 2KVA Canopy type silent DG Set petrol, rating 1.8 KVA Output with self starting. fuel tank capacity 9.4 ltrs Single phase ,cylinder 4 stock over head valve complete all as specified and directed. .
Supply, fixing and laying including testing of XLPE insulated screened PVC bedded steel wire /strip armoured heavy duty ,1100 Volt grade ,multistandared aluminium conductor cable of size 95 Sqmm 3½ core laid into trench ,passing through pipe ,ducts,making electrical connection over pole /panel at one end into MCB DB's /Main switch / Change over switch through proper lugs/thimbles at both ends ,having complete all as specified and directed.
All above as per item No. 10 described here-in-before but size 70 sqmm 3½ core complete all as specified and directed..
Supplying and laying synthetic Rubber insulated mats 3.0 mm thick for voltage upto 33 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m. size and laid infront of LT panel & DG set complete all as specified and directed..
Supply and fixing Offload change over switch 415 volt AC, 50Hz in sheet enclosure, 4 pole of capacity 100 Amps, side handle including making electrical connections complete all as specified and directed.
material and labour for earthing complete with galvanised steel plate earth electrode 600 mm X 600 mm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to earthing lead of 32 mm X 6 mm galvanised mild steel strip by means of bolts, nuts, check nuts and washers of galvanised iron from earth plate to test point upto 7.5 metre including all as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 cm X 40 cm X 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 20 mm dia GI pipe medium grade for watering, 40 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing complete all as specified and as directed. Notes:- (i) Main earthing strip from earth plate electrode to rest point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department.
M/S UTTAM GANGULY ENTERPRISE
M/S SANKAR GOPE
SUMAN DEB
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .