Construction of RCC Drain, PCC Road and Slab in Anantpur Street No-06 under ward No-46

Labour for cleaning the work site before and after work etc

Dismantling plain cement or lime concrete work including …do…

Earth work in Excavation in foundation trenches in ordinary soil (vide classification of soil item A ) and disposal of excavated earth as obtained to a distance up to 50 m. including all lifts, leveling, ramming the foundation trenches removing roots of trees, all complete as per approved design , building as per specification & direction of E/I.

Providing stone cruster dust finer than 3mmwith not more than 10% passing 0.075 sieve at quarry in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150 mm thick with all leads and lifts including cost of materials labour, royalty and taxes all complete as per specification and direction of E/I. (Mode of measurement compacted volume.)

Supplying and laying (properly as per design and drawing) rip-rap with good quality of Boulders duly packed including the cost of materials, royalty all taxes etc. but excluding the cost of carriage all complete as per specification and direction of E/I.

Reinforced cement concrete work in walls (any Thickness), including attached pilasters, buttresses, abutments, posts and structs etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III): 3 graded stone aggregate 20mm nominal size)

Reinforced cement concrete work in beams, suspended floors, foors having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staicases and spiral stair cases above plinth level up to floor five Ivevel, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand (Zone-III): 3 graded stone aggregate 20mm nominal size).

Providing and laying in position concrete of specified grade excluding the cost of centering and shuttering- All work upto plinth level: 1:1.5:3 (1 cemet: 1.5 coarse sand (zone-iii): 3 graded stone aggregate 20mm nominal size)

Providing Tor steel reinforcement of 8mm & 10mm dia bars as per approved design and drawing excluding carriage of Rods (straight or in coils) to work site, cutting, bending, and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. 8mm Dia.