SITC of Heat Pump and Hot Water Tank for Construction of Boys Hostel Under (ICAR) at FVSc and AH Shuhama, SKUAST-K

SITC of Heat Pump with following specifications :- As per ISO 5149-1-2014 for safety and design and comply with IBR 1950 for pressurerize components and IS 13979:1994 Racold /Venus/ Daikin / AO Smoth /V Guard /Havells Make Heat Pump R HPWH 23KW Heat Pump

Type of Heat Pump - : Air to water type heat pump Hot Water Capacity - 23kw Rated Water Heating capacity at 20℃ : - 494 l/h Power Input - 4.84 kw Max. Power Input - 6.9 kw COP - 4.75 Ambient Temperature Range - 15 ～45℃ Max.Outlet Water Temp - 55℃ Refrigerant - R410A

SITC of Hot water Tank 2500 LTR MS Pressurised HOT WATER MIXING TANK of cap. complete with inlet cold water ,inlet/outlet, drain connection with flanges, with required manhole with bolted cover, including ball valves, dial type thermometer, automatic air vent valve, thermal bleed valve, strainers complete in all respects. The tank shall be fabricated out of Mild Steel of thickness, Dish thickness 6 MM and shell thickness 6 MM

SITC of Circulation Pump Grundfos Make Circulation Pump with Stater panel Pump Type: Horizontal, End suction, Multi-stage. Centrifugal pump Pump Housing: Cast Iron Pump Impeller: Stainless Steel Rated Power: 0.46kw

SITC of Heating Element 18 KW Heating Element With Control Panel with thermostat

SITC of Booster pump Grundfos make Booster pumps CM 5-4 TWIN 1 PHASE

SITC of Pressure tank Pressure tank 100 lits PN10

Panel Fabrication, supply, installation, testing & commissioning of outdoor type compartmentalized feeder pillar having front area not less than 0.60 Sqmtr and depth 45 Cm (NS) made out of 2mm thick CRCA sheet with tappered roof having separate cable and bus bar alley, 1 door arrangement i/c locking arrangement, having 400 Amp four pole aluminium bus bar of full length with base frame made out of 50mmx50mmx6mm (thick) angle iron having 80cm legs for erection in ground with construction of cement concrete suitable foundation size complete with connections and interconnections with copper conductor PVC insulated cables/ insulated aluminium busbar strips of appropriate size and terminal blocks (on outgoing) including supplying & fixing following switchgears & accessories there in, powder coating, labelling, earthing etc. complete as required. Providing and fixing following accessories in existing cubical panel board i/c making connection etc. as reqd. Details as under Panel Powder Coated 2.0mm S/I of MCCB 160 A 4P 36 kA = 1 No. , Bus Bar 4000A Panel Accessories like nut bolts, locks, etc , Cement concrete works as needed.

Panel Fabrication, supply, installation, testing & commissioning of outdoor type compartmentalized feeder pillar having front area not less than 0.60 Sqmtr (900 mm x 900 mm) and depth 45 Cm (NS) made out of 2mm thick CRCA sheet with tappered roof having separate cable and bus bar alley, 1 door arrangement i/c locking arrangement, having 400 Amp four pole aluminium bus bar of full length with base frame made out of 50mmx50mmx6mm (thick) angle iron having 80cm legs for erection in ground with construction of cement concrete suitable foundation size complete with connections and interconnections with copper conductor PVC insulated cables/ insulated aluminium busbar strips of appropriate size and terminal blocks (on outgoing) including supplying & fixing following switchgears & accessories there in, powder coating, labelling, earthing etc. complete as required. Providing and fixing following accessories in existing cubical panel board i/c making connection etc. as reqd. with 400 A Bus Bar Al 4 Strip. Details as under : S/I of MCCB 160 A 4P 36 kA = 1 No. , Bus Bar 4000A Incomer S/I of MCCB 125 A 4P 36 kA = 2 No. Outgoing Bypass changeover 100 A 4P = 1 No Panel Powder Coated 2.0mm Panel Accessories like nut bolts, locks, etc

Cable Supply , laying of 1100 V 3.5 core 95 Sq MM aluminium cable -armored cable in ground , walls ,ceiling trenches etc complete with clamp and saddle etc , termination etc

HDPE Supply and laying of folowing size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground 75mm below level including excavation and refilling the trench but excluding sand cushioning and protective covering etc , complete as required.

90 mm dia nominal)

Note:-The rates quoted are inclusive of all carriages of materials (Mechanical/Manual) from source to site work and all extra charges including dewatering if any during the execution of work till complete in all respects.

Please Enable Macros to View BoQ information