REPAIRS TO COMPOUND WALL, FENCING, RCC JALLI WALL, PERIMETER WALL IN MADAMBAKKAM, NARENDRA PLACE , 9 P S UNIT AT AF STATION TAMBARAM

Amount

Demolition of brickwork,PCC or stone / boulder masonry in floor or wall built in cement mortar complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Excavating in post holes (or similar holes) each not exc 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil complete all as specified and directed.

M&L PCC Type D2 (1:4:8) using 40mm graded stone aggregates as in foundation, filling and mass concrete complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness below or above ground level complete all as specified and as directed .

M&L for PCC 1:3:6, type C2 ,100mm thick as in path way using 40mm graded stone aggregate finished fair and even complete all as specified and directed

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and no pigments complete all as specified and as directed .

M&L for cement concrete 1:3:6 using 40mm graded stone aggregate, 75 mm thick in plinth protcetion/path/hard standing and courtyard, finished cement surfaces even and smooth with out using extra cement complete all as specified and as directed.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for brick work with using fly ash bricks, straight or curved on plan exc 6M mean radius built in CM 1:4 complete all as specified and directed.

M&L Precast Cement concrete block Masonary using solid block exc 10 cm made out of 1:2:4, type B1 using 20 mm graded stone aggregate, setting in CM 1:4 complete complete all as specified and directed.

M&L for rendering on fair faces on wall surfaces 15 mm thick in cement mortar 1:4 mixed with water proofing compound at the rate of 2% by weight of cement on roof surfaces, finished fair and even without using extra cement. NOTE : Water proofing compound shall be measured and paid separately complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L Precast RCC Jallies 35 mm thick including all mouldings, type B0, 1:2:4 using 12.5mm graded stone aggregate, set in CM 1:4 complete all as specified and directed. ( Note : Unit quoted rate is deemed to be inclusive of necessary reinforcement)

M&L for preparation of newly plastered wall surfaces and applying two coats of cement based paint complete all as specified and directed.

M&L PCC 1:3:6 type C2 ,using 20 mm graded stone aggregate as in coping complete all as specified and as directed

M&L for broken glass coping on top of wall setting in CM 1:3 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and complete all as specified and directed.

Dismantling fencing wire mesh, any type and complete all as specified and directed.

S&F Mild Steel as in Joist, channel, angle, Flat or tee sections, fixed independently, without connecting plates, etc. cut to ordinary lengths as in fencing posts complete etc as in chain link fencing posts and struts including cutting tops to shape as directed, drilling holes, notching for wire, etc for securing wire mesh etc, and similar work conforming to Fe-290 Gde E-165 all as specified and as directed

S&F mild steel screw bolts (machine made), diameter of shank 11 to 15 mm, with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exc 15 mm long complete all as specified and directed.

S&Fmild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooksand hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed

S&F in repair galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings andstraining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc, as directed (each line wire to be measured) complete all as specified and directed.

Restraining, resecuring including making good galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings andstraining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc, as directed (each line wire to be measured) complete all as specified and directed.

M&L for Welding in repairs exc 6mm and not exc 9mm in thickness and not exc 2.5cm in length complete fixed in position all as specified and directed.

M&L for Welding in repairs exc 6mm and not exc 9mm in thickness exc 2.5cm not exc 5cm in length complete fixed in position all as specified and directed.

S& F for Welded steel wire fabric not exc 4.0 kg complete fixed in position all as specified and directed.

S&F Mild steel hold fast made of flat iron conforming to 410-0 or Fe-310-0 compelete all as specified

M&L PCC 1:3:6 type C1,using 20 mm graded stone aggregate as in coping , PCC block for fixing of hold fast, sanitary fittings etc., complete all as specified and directed

Cutting holes into or through brick walls/ pillar built in mud mortar for hold fast, size 150x100x100 mm complete all as specified and directed.

M&L preparation of new steel surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L preparation of old steel surfaces of any description, over 10 cm in width or girth and applying one coats of synthetic enamel paint complete all as specified and directed

S&F in repairs of 600mm dia concertina coil fixed to the existing mild steel post over the boundray wall of height 3m complete all as specified and directed.

S&F MS galvanisd chain link fencing, any size or types all as specified and as directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire all as specified and as directed

S&F TMT Bars 10mm dia and Over as in strenthening bar, cut to length, bent to shape as required including Cranking, Bending, Hooking Ends and binding with Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L Writing letters or figures (Block. Roman, Italic or Indian) not exc. 30 cm high with synthetic enamel paint complete all as specified and directed

Mahathi Constructionss

kcs builders

Raju Builders

JVM Construction

vrk constructions