REPAIR MAINT OF FLOORING JOINERY WPT AND OTHER CONNECTED B R WORKS AT INF MESS INF AUDITORIUM VVIP GUEST ROOM AND CERTAIN OTHER AREA OF AGE BR II UNDER GE (MIS) MHOW

Amount

Taking down shuters of any description n.exc 1 sqm each and removing from site complete all as specified and as directed.

Taking down shuters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutter (without taking off shutters from the frame) area n. exc 1.5 sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutter (without taking off shutters from the frame) area exc 1.5 sqm but n.exc 4.0 sqm each complete all as specified and as directed.

S & F second class hard wood plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S & F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick factory made second class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified and as directed.

S & F 35 mm thick factory made, second class hard wood glazed and skeleton shutters open rebeated and prepared to received glass, gauzed, without sash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR Part-I Section 8, clause 8.24 (a) and for door and fixed with chowkats, chemically pressure treated complete all as specified and as directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm mix plain colour PVC sheet reinforced with ms square tube, will be painted to match with printed sheet complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of ms tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.

S&F Factory made solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F pre painted steel sliding window of 3-Track system consisting of, 2 glass panel and 1 mesh panel, sliding window fabricated from Roll formed sections made of galvanized Steel colour coated/powder coated (Base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 gm/Sqm with total coated thickness of 0.58mm, Primer coat with epoxy primer of 5-7 microns thick, finishing coat painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick, Section for external frame shall be of 107x44mm, Section for shutter shall be of 35x49mm, Section of mesh shall be of 35 x 49 mm and the windows shall be paneled with 5mm thick plain clear glass, Corner bracket for internal and external frame made of glass filled nylon, gaskets shall be made of Ethyl Propylene Diamine Monomer (EPDM).The sections shallbe cut to length, joined and assembled by means of corner bracket. The above frame shall be fixed to the concrete/masonry walls by means of self expanding screws complete all as specified and directed by Engineer-in- charge. Make-NCL or other equivalent approved by GE.

S&F single rebate openable/fixed windows made of galvanized steel colour coated/powder coated (base steel as per IS 513 of “D" quality, galvanized as per IS 277 with zinc of 120 grams/sqm) with total thickness of coating 0.58 mm, primer coated with epoxy primer of 5-7 microns thick, finishing coat painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, outer frame section 48 x 50 mm, centre mullion section 48 x 50 mm, shutter section 47 x 20 mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consists rebate for glazed shutter with 20 mm provision for guard bars/grills and the sections cut to length mitre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. of stainless steel heavy duty pivot hinges per shutter and window fitted with 5mm thick plain float glass with EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing frames in concrete/masonry wall by means of self expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. complete all as specified and directed by Engineer in Charge.Make-NCL or other equivalent approved by GE.

S&F double rebate openable/fixed windows made of galvanized steel colour coated/powder coated (base steel as per IS 513 of “D" quality, galvanized as per IS 277 with zinc of 120 grams/sqm) with total thickness of coating 0.58 mm, primer coated with epoxy primer of 5-7 microns thick, finishing coat with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, outer frame section 72 x 55 mm, centre mullion section 72 x 50 mm, shutter section 47 x 20 mm,fly mesh section 40 x 20 mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consists rebate for glazed shutter, fly mesh and 20 mm provision for guard bars/grills, the sections cut to length mitre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles, latch, 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self-expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. complete all as specified and directed by Engineer in Charge.Make-NCL or other equivalent as approved by GE.

Preparation of new wood and wood based surfaces of any description not other wise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S & F galvanised Stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed.

S & F in repair galvanised Stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed.

S&F sheet glass ordinary quality 3mm thick and glazing with oil putty in squares. not exc 0.5 Sqm in each pane complete all as specified and as directed.

Hacking out old broken glass ( any tickness size ,quality or description ) from wooden frame or stone etc and S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beading in square not exceeding 0.50 sqm in each panes complete all as specified and directed.

S&F Butt hinges of size 100mm medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 150 mm long Aluminium anodized barrel tower bolts of extructed section .

S&F aluminum alloy handles fabricated anodised of 150 mm long .

S&F 200 mm long Aluminium alloy anodised sliding door bolt with hasp staple (bolt type) including fixing clips of sheet, cast or extruded section and fixing bolts and 16mm dia bolt sliding bolts of extruded section complete all as specified and as directed.

Taking down existing aluminium Door/window shutters of any size and carry out minor repairs with & including replacement of unserviceable top/bottom rail, hinges, rubber beading, etc including replacing of broken wire mesh and glass panes as required and refixing the shutter in the same opening after repairing complete all as specified and directed. Note Wire mesh and glass as required shall be measured and paid separately under relevant items.

S&F fabricating coloured powder coated aluminium frame work for door shutter ,windows , ventilators, partition, with one or more rebates sections of approved tint including beading,cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc including taking down of exiting frame complete all as specified and directed.

S&F aluminium coloured power coated window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary locking arrangement, guide wheels, jointing cleats, glazing clips rubber packing anodised aluminium snap beading screws etc including taking down of exiting shutter complete all as specified and directed.

S&F aluminium coloured power coated door shutters, aluminium section weighing 0.55 Kg/m including necesssary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws etc including taking down of exiting shutter complete all as specified and directed. .

S&F 4.8 mm thick plain or tinted glass, ordinary quality including rubber gasket for packing and fixed to aluminium doors/window/partition including necessary cutting / moulding and chamferring of edges for service window/counters complete all as specified and directed.

S&F in repair aluminium (extructed section) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutter and fixed complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repairs veneered decorative plywood 12mm thick, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work all as specified and directed by Engineer-in-charge.

S&F in repair 25 mm dia mild steel chromium plated drappery curtain rod with fixing bracket complete all as specified and directed .

Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quions ,arches , pillars etc complete all as specified and as directed.

M & L for Brick work with sub class 'B' modular bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 in any position complete all as specified and as directed.

All as per item No 35 above but except brick. Note : Serviceable bricks obtain from demolition shall be re-used.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick or concrete surface of wall and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10 mm thick in CM ( 1:6 ) on fair faces of wall/ concrete surfaces finished even and fair complete all as specified and directed.

M & L for applying two coats of first quality oil emulsion distember over new plastered surface of wall with putty complete all as specified and directed. Note:- Putty shall be measured and paid seperately under relevant item.

M & L for preparation of new plastered surfaces of walls and applying two coats of Acrylic Smooth exterior paint of approved shade (@ 1.67 litre/10 sqm) over a coat of primer(@ 2.20 kg/10 sqm) all as specified and directed.

M&L for preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying two coats of 1st quality oil emulsion distemper white/coloured over a coat of cement base white wall care based putty as required at site in patches complete all as specified and directed by Engineer-in-Charge. Note:- Putty shall be measured and paid separately under relevant item.

M&L for Preparation of old decorated surfaces of wall including brooming , scraping down, smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying one coat of 1st quality oil emulsion distemper all as specified and directed.

Preparation of old painted surfaces of wood/wood based materials exc 10cm in width or girth and applying one coat of synthetic enamel paint all as specified and directed.

All as per item No. 43 above but on steel surfaces. complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying one coat of exterior weather proof water base emulsion paint white/coloured over primer of same make over white cement based putty as required at site in patches all as specified and directed. Note : Putty shall be measured and paid seperately under relavant Item.

M&L for preparation of old decorated surfaces of wall including brooming , scraping down, smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying two coats of Acrylic Smooth exterior paint of approved shade (@ 1.67 litre/10 sqm) over a coat of primer(@ 2.20 kg/10 sqm) of same make base over white cement based putty as required at site in patches all as specified and directed. Note:- Putty shall be measured and paid seperately under relevant Item.

M&L for applying Asian Royale play textured wall paint over prepared surface of wall with and including white cement base putty and design as approved by Engineer-in-charge complete all as specified and directed.

M&L for preparation of newly plaster surface of wall and and applying 2mm thick cement base wall care putty in two coats (each coat not less than 1mm) over a coat of primer on walls and surface finished even and smooth with sand paper complete all as specified and directed

M&L for complete removal of existing treatment of wall (any no. of layers) and applying 2mm thick white cement base wall care putty in two coats (each coat not less than 1mm) over a coat of cement base primer on walls and surface finished even and smooth with sand paper complete all as specified and directed

Demolition of cement concrete of any description in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land all as specified and as directed .

M&L for PCC (1:2:4) type B0 using 12.5 mm graded crushed stone aggregate as in sub base, levelling course, etc complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base, floor, etc complete all as specified and directed

M & L for 75mm thick plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in floor/ plinth protection finish the surface even and smooth with using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified and as directed.

Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) and rubbish off the primeses complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layer in CM 1: 6 complete all as specified and as directed.

M&L for non –skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed in CM 1: 6 complete all as specified and directed.

M&L for scratch free vitrified ceramic tiles 10mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm ,in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

All as per item No 57 above but as in skirting/ dado etc with and including 10mm thik backing coat in cement mortar 1:4 on wall complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size not less than 300x250x7 mm thick as in vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match with colour of tile over and including 10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size not less than 450x350x7 mm thick as in vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match with colur of tile over and including 10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors complete all as specified and as directed.

M&L for chequered cement concrete tiles with grey cement and pigment of size 25cmX25cmX25mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for chequered cement concrete tiles with grey cement and pigment of size 40cmX40cmX40mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M & L for machine cut kota stone slab in flooring 20-25mm thick laid over and including 15mm thick screed bed in CM 1:6 & cement mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed.

M&L for 18-20 mm thick green shade marble of approved quality of any size, set and jointed in grey cement slurry laid over and including 15 mm thick screed bed in CM (1:4) including granite polish by using mechanical grinder and moulding edges compete all as specified and as directed.

M&L for rounding to edges of stone slab slab one edge such as in steps,cooking platform,and other similar situation complete all as specified and directed.

M&L for 18-20 mm thick Black shade granite slab of approved quality of any size bedded and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15 mm thick screed bed in CM (1:4) including granite polish using by mechanical grinder and moulding edges complete all as specified and directed.

M&L for 60mm thick machine pressed rubber moulded precast concrete interlocking paver block (glossy finish) of M-35 grade of approved shape, size and colour conforming to IS 15658-2006 including joints filled with sand and stone dust 50mm thick as in levelling course of interlocking complete all as specified and as directed.

S & F for precast cement concrete 1:2:4 type B1 usiing (20mm graded stone aggregate ) as in kerb and edging to road and footh path, etc including chamfered,weathering, throating etc and setting in CM (1:4) complete all as specified and as directed.

S&F in repairs 50 x 15 mm size magnet door catcher for closing for Cupboard door shutter complete all as specified and directed .

S&F in repairs 18 mm thick factory made PVC sheet one side pre-laminated sheet kitchen cabinet shutter, 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lapping bending for 0.5 mm thick PVC sheet lapping at all four edges using bonding tape etc complete all as per Manufacturer's specification and directed by Engineer-in-charge.

S & F in repairs factory made PVC shelf/partition of required size consisting of panel of 18 mm thick required size consisting of panel of 18 mm thick celuka PVC ply and for supporting the hold of shelf /partition and shall provided 3 edges in size 18mm x 18 mm as per required length the front side of the edge visible in the front of the shelf/partition to be edge lipped by 18mm width x 1 mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company , using solvent cement etc. complete all as specified and directed by Engineer-in-charge.

S& F 100 mm size MS mat/glossy finish handle complete all as specified and directed .

S&F stainless steel shelf closing hinges 75 mm size for PVC door shutters complete all as specified and directed

S&F modular type stainless steel basket of size 20 x 19 x 8 inches dia of wire not less than 3.00 mm ) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws including all fixing arrangement complete all as specified and directed.

All as per item No 75 above but basket size 20 x 19 x 6 inches complete all as specified and directed.

S&F modular type stainless steel Perforated Sheet Cutlery Basket of size 20 x 19 x 4 inches dia of wire not less than 3.00 mm of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws including all fixing arrangement complete all as specified and directed.

M & L for repair to sunken floor by provide water proofing treatment to sunken floor surfaces of RCC slab by the following specifications as specified and directed :-(a) Provide PCC 1 : 1.5 : 3 type A0 using 12.5mm graded stone aggregate in slope of average thickness 50mm on sunken floor slab mixed with and including integral water proofing compound manufactured by Dr FIXIT or other equivalent as approved, finish the surface even & smooth without using extra cement.(b) Rendering 15mm thick in CM 1:3 mixed with & including integral water proofing compound on sunken floor and sides of (Vertical surface) sunken portion.(c) Applying surfaces of bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm on complete sunken surfaces of floor & wall and provide necessary connections to soil/waste pipe from WC/ nahani trap etc including demolition of old sunken complete all as specified and as directed. (d) applying two coats of tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane. (e) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed. (Note : Floor Area shall be measured for payment).

M&L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete as directed and specified.

M & L for applying one prime coat acrylic polymer modified water proofing coating (Brushbabd of FOSROC or other equivalent as approved by GE) and applying twocoats of acrylic polymer modified two component elastomeric water proofing membrane coating (Brush band of Fosroc mate or other equivalent approved) complete all as specified and as per Manufacturers instruction and directed by Engineer-in-charge.Make:- Fosroc,Sika,Dr fixit Note :- (i) Quated rate shall be inclusive for applying 15 to 20mm thick protection plaster in CM 1:3 on verticla and horzontal areas mixed with chemicla of Dr. Fixit pidi proof LW Plus conforming to IS 2645-2003@ 200ml per 50 kg of cement bag. (ii) Water proofing treatment shall be executed only through Authorised Applicator certified by Manufacturer. (iii) Contractor shall submit 5 years written warranty for the water proofing treatment carried out under this item.

M&L for grinding & wax polishing the existing to old kota stone slab to obtain mirror finish surface as in floor ,steps etc complete all as specified and directed by Engineer-in-Charge.

M&L for removing carefully the existing roof treatment of any description such as old APP membrane roof treatment as in terracing including screed bed, Hessian base felt/tar felt etc. (any type and thickness) complete all as specified & directed.

M&L for 25mm thick cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in roof top etc complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on roof surface mixed with WPC as per Manufacturer's instruction's and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid for separately as supply only under respective item.

Supply & providing water proofing roof treatment with polymeric standard water proofing membrane, Aqua flex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/ Hyperplas manufactured by IWL Ltd having 10 years guarantee for water tightness complete all as specified and described as under:- (a) Preparation of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/sqm including cleaning surface all as per manufacturer's specification complete all as specified and directed. (b) Supply & providing water proofing with 3 mm thick APP polymeric proofing membrane of 3Kg/Sqm HYPERPLAS STANDARD/ MULTIPLAS STANDARD consisting of 100 micron HMHDPE film centre core including coating the surface with compatible primer and torch application of membrane with 10cm overlaps as required thereof, complete all as specified and directed (c) Aluminium bituminous paint @0.15 Kg/Sqm shall be applied over the APP membrane surface. NOTE:- The work of water proofing treatment shall be got executed only through authorised applicator certified by Manufacturer's.

M&L for Cement concrete tiles 20cm x 20cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors with grey cement and pigments, cut and polished etc over and including 15mm thick cement plaster in CM 1:4, complete all as specified and directed by Engineer-in-charge.

Supply only Liquid Water proofing compound PIDIPROOF LW+ of Dr FIXIT or equivalent as other approved by GE.

M & L for providing precast cement concrete louvers and jallies 50mm thick (measured solid), using cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate , set in cement mortar (1:4) including all moldings but excluding frame complete all as specified and as directed.

S& F in repair Rotational moulded Polyethylene water storage tank 500 liters capacity three layered (cylidrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I complete.

All as per item No 89 above but complete all as specified and directed

S & F 16mm outer dia 3-layer PP-R Polypropylene random copolymer(cpvc) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc. including taking down of existing pipe complete all as specified and as directed.

S&F 15mm bore steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc , including taking down of existing pipe complete all as specified and as directed.

S&F in repair 15mm bore bib taps chromium plated with crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrule complete all as specified and directed.

S&F in repair CP pillar taps (swan neck type) cast copper alloy CP with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specified and directed.Make:Plumber/Essco of Jaguar(Economical range)

S&F in repair fancy type chromium plated15mm bore two way Bib cock cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified and as directed. Make:Plumber/Essco of Jaguar(Economical range)

S&F in repair CP wall mixer for mixing hot & cold water screwed down for iron pipe 15mm bore complete all as specified and as directed.Make:Plumber/Essco of Jaguar(Economical range)

S&F in repair 125 mm size chromium plated shower rose with siwel joint and arm not less than 20cm long suitable for 15 mm bore GI pipes comlete all as directed.Make:Plumber/Essco of Jaguar(Economical range)

S& F in repair CP toilet paper holder complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pedestal pattern white excluding flushing cistern and flush pipes complete all as specified and as directed .

S&F in repair vitreous china squatting pan `Orissa ' pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipes) including connection to trap and to flush pipe, lime concrete bedding, 'P' or 'S' trap complete all as specified and as directed.

S&F in repairs PVC valve less,syphonic action type flushing cistern,low level ,white with inlet ball valve,float and handle including brackets and connection to pipe and fixing of chain and pull or lever if any complete all as specified and directed. Make:Plumber/Essco of jaguar(Economical Range).

S&F in repair health faucet with flexible pipe of one meter length including wall hook for EWC complete all as specified and as directed. Make:Plumber/Essco of jaguar(Economical Range)

S&F in repair vitreous china wash hand basin white flat back of size 550x400 mm including bracket but excluding taps ,waste pipes , chain and plug etc complete all as specified and directed. Make :Plumber/Essco of jaguar(Economical Range)

S & F in repairs vitreous china wash basin white (oval shaped under counter) of size 560 x 410 x 180 mm including 32mm brass CP waste coupling complete all as specified and as directed .Make:Plumber (CAT Part No. 4790)

S & F in repairs vitreous china wash basin white table top of size 460x350mm including 32mm brass CP waste coupling and all other fittings complete all as specified and as directed Make:Plumber (CAT Part No. 4656)

S&F in repair kitchen sink with drainage board made of stainless steel 1.0 mm thick in kitchen with plug , washer and waste including bedding layer in CM (1:6) in wall or including fixing cantilever bracket and connecting union to pipes over all size 915x460 mm bowl size 410x330x160 mm complete all as specified and as directed.

S&F in repairs PVC connection 15mm size with PTMT nuts 450 mm long complete.

S&F in repairs PVC waste pipe for urinal/wash basin/ sink pipe 32mm bore 65cm long complete.

S&F in repairs of brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etc complete.

Dismantling of Asbestos cement (corruga ted, semicorrugated) sheets in roof coverings complete all as specified and as directed.

S&F 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed.

Dismantling of timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in un-framed work complete all as specified and directed.

S&F Mild steel Hollow Section work in tubular trusses, purlins, rafter, tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer using ERW or induction butt welded tubes conforming IS-4963,1993 and IS-1161-1979 grade ST-240 complete all as specified and as directed.

S&F Mild Steel for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming IS-1161-1979 grade ST-240 complete all as specified and as directed.

S&F Mild steel plates (Plain or chequered) as in shoe plate, base plate and gusset plates forming holes for roof frame work, trusses, rafters etc of grade Fe 410 WA. complete all as specified and as directed

S&F Mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed

Demolition of reinforced cement concrete of any description and in any position not otherwise described comlplete all as specified and directed.

M&L for RCC 1:2:4 type B1using 20mm graded stone aggregate as in kitchen shelves , manhole cover, etc complete all as specified and directed.Note: Reinforcement shall be measured and paid separately under relevant item.

M&L for form work to soffits suspended slab such as roof slab, floor slab, landing and similar work as in kitchen shelves not exceeding 200mm thick rough finished surface of concrete etc.complete all as specified.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed

S&F Gypsum Board 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre on GI frame work for seamless ceiling comprising of GI perimeter chennel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at (approx) 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with clips of 10.5mm fixed to the intermediate channel at 457mm centre to centre inluding finishing the joint of face board with specially formulatted jointing compound and 48 mm wide fibre tape to provide seamless finish Ceiling shall be sealed at joints and finished with jointing compound etc complete including finishing the exposed surfaces of false ceiling with two coats of plastic emulsion paint over a coat of primer complete all as specified and directed.

S & F for Anodised aluminium snap grid size (605mmx605mm) frame work for false ceiling with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed by Engineer-in-charge.

S&F Exposed metal frame ceiling with 6mm calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid complete all as specified. Note : Frame shall be measured and paid separately under relevant item.

S&F PVC prelam sheet wall/Ceiling paneling of thickness 5mm consisting of panels having size 1.22 M x 2.44 M stuck on inner frame work of 50 mm wide strips of 5mm thick prelam PVC sheet of 600 Kg/cbm density manufactured by an ISO-9000 certified company. The strips should have in their centre a groove of 6mm width and 1mm depth of sinking the head of the screw used to fix the strip to the wall vertically at an equal interval of 10” between two PVC strip. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fastners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joints of two panel for aesthetic looks. The exact size of the panel and correspondingly of grid may vary depending on the size of wall. Optionally a strip of 5mm thick PVC sheet of width 75mm feathered at edges shall be struck at the places where two panels are jointed, using solvent including dismantling of old wooden boarding complete all as specified and as directed

S&F 12mm thick Frosted Toughned Glass fixed on patch hinges/pivot for smooth functioning in door shutter including stainless steel handle of 8 inches long and mortice locking arrangement complete all as specified and as directed

M&L for washed stone grit plaster on exterior walls in two layers, under layer with 12mm thick cement plaster 1:4 (1 cement; 4 coarse sand) following the under layer with scatching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer with 15mm thick cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping of 10mm nominal size) in panels with groove all around as per approved pattern including scubbing and washing, the top layer with brushes and water to expose the stone chippings including necessary scaffolding to height upto 25 metre as in repairs complete all as specified and as directed.Note : Groove shall be measured and paid separately under relevant item.

M&L for forming groove of size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and as directed by Engineer-in-charge.

S&F double scaffolding system(cup lock type) on the exterior side of building/structure, up to 10 meter height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5metre centre to centre, horizontal & vertical tubes joint with cup and lock system with M.S tubes, M.S tube challis, M.S. clamps and staircase system in the scaffolding , working platform , walkway wherever required , lighting arrangement etc. and maintaining it in serviceable condition for execution of work of civil repair/structural repair & rehabilitation /cleaning and /or pointing and/or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracing, runners, connecting with the building etc. wherever required, if feasible, for inspection or work at required locations with essential safety features for the workman etc., complete as per directions and approval of Engineer-in-charge. Note:- The front elevation area of the scaffolding shall only be measured for payment purpose. Contractor shall quote the rate awarding nothing extra to shall be paid.

M&L for (SGSW) drain pipe of 150mm internal dia laid in trenches and jointed in cement mortar (1:1) complete all as specified and directed including demolition and breaking up drain pipe any type and any discription and excavation of earth work including removing the debris and concrete bed and haunching from the trenches complete all as specified and directed.

M&L for PCC (1:3:6) type C 2 using 40mm graded stone aggregate as in concrete bed to drain pipe including packing under and haunching against the sides of pipe after they are laid and tested for internal dia of pipe 150mm with specified bedding thickness, etc complete all as specified and directed .

S&F 4 mm thick aluminium composite panel sheet Exterior Grade on wall cladding etc, including taking off Stone Cladding work if required including necessary Aluminium frame/structure as required to fix the sheets with all necessary packing and fixing arrangements etc including necessary scaffolding arrangment complete all as specified and directed by Engineer-in-Charge. Note (i) Colour and Texture of ACP Sheet shall be approved by Engineer-in-Charge. (ii) ACP work shall be carried out and fixed on substructure upto 12m height.

M&L for 20-25mm Granite/Stone Cladding (of any type) work(table rubbed and polished) on pillars / walls upto 12m height with suitable cement mortar backing coat in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding and polishing including necessary scaffolding arrangment complete all as specified and as directed. Note-Colour,shade and pattern of granite shall be approved by Engineer-in-charge.

S&F 10-15mm thick Polycarbonate sheet in dome structure/similar condition with rubber neoprene/similar packing material fixed and packed with sheet including dismantling of existing sheeting complete all as specified and as directed.

Demolition of reinforcement cement concrete of any description and in any position in ground floor and pavings n.exc 15cm thick (below or above GL) complete all as specified and directed.

M&L for precast RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in cover slab,manholes and soak well cover slab etc set in cement mortar (1:4) including necessary form works as required all as specified and directe.Note:-Reinforcement shall be measured & paid separately under relevant item.

S&F TMT bars of 6 mm to 8 mm dia cut to length bent to shape required including cranking bending and binding with mild steel annealed wire not less than 0.90 mm dia or securing with clips complete all as specified and directed.

All as per Item No 138 here-in-before but 10 mm dia and over complete all as specified and directed.

S&F in repair Door sensor machine of sliding door with toughened glass 12 mm thick of main entrance of Auditorium gate, including necessary parts as required and repairing parts of Motor,Module,Power Supply etc with all required accessories, and make Sliding door functionable in all respects complete all as specified and directed at site by Engineer-in-charge. Make:-Ozon,Dorma or equvalent approved by GE.

M&L for cleaning of existing wall carpet/wall cord (fitted crapet or broadloom carpet ) of Auditorium to a height upto 15 metre by using vaccum cleaner (Dry cleaning method) or any other advanced technology as approved by GE and removing of stains,dust other marks ,foreign materials etc without damaging the condition of carpet including necessary ladder,scaffolding with all required saftey equipments for cleaning complete all as specified and directed at site by Enineer-in-charge. Note: Cleaning shall be carried out by skilled Technician team /Authorised service provider as approved by Engineer-in-Charge .

Taking down Urinal/Urinal Sensor machine, for repairing including providing necessary spare parts such as battery, Sensor part, Wiring etc. as required for smooth functioning and refixing the Urinal/Urinal sensor in the same position complete all as specified and directed by Engineer-in-charge. Make of parts:- Jaquar,CERA,Hindware and Parryware

Chitragupta Construction