REPAIR/ REPLACEMENT INCL RE-WIRING OF DEFECTIVE WIRING, REPLACEMENT OF MCBs, DBs, SWITCH / SOCKETS AND CONNECTED WORKS POCKET I AND II, REPAIR / REWINDING OF CEILING / EXHAUST / WALL MOUNTED FANS AND GEYSERS INCL SPARES, OILING, GREASING AND PAINTIN

Amount

Taking down carefully existing unserviceable point wiring with copper/ aluminium conductor cables (light, fan, socket or power) complete including fittings such as switches, ceiling rose, pendants, regulators, sockets but excluding light fittings complete and removing retrieved materials and making good the disturbed surfaces of wall, floor ceiling etc., complete all as specified and as directed.

M & L Point wiring complete with 1100 volts grade single core, PVC insulated FRLS cable with multi-stranded copper conductor of size 1.5 sq mm nominal area, passing through heavy grade PVC casing casing 'N' capping/ PVC conduit of suitable size, with all necessary fittings on wall/ roof surfaces, duly earthed with one run of single core PVC insulated FRLS cable with multy stranded copper conductor of size 1.5 sqmm nominal area green in colour as continues earthing wire connected to common earth dolly including 1.6 mm thick fabricated CI/MS sheet terminal box concealed mounting in the wall for mounting switches,switch socket combination, fan regulators etc.covered with 3mm thick electroplated bakelite sheet top cover for housing switches, sockets, regulators etc. complete for one light/ fan point controlled by one single pole 5 amps switch/socket all as specified and as directed.

One light point controlled by one single pole 5 Amps switch

One fan point controlled by one single pole 5 Amps switch and regulator

One light points controlled by two Nos of two way 5 Amps switch

One switch socket out let point 5 Amps on independent board

One switch socket out let point 5 Amps on same board with other switches

One bell point controlled by one bell push

M & L Point wiring complete with 1100 volts grade single core, PVC insulated FRLS cable with multi-stranded copper conductor of size 1.5 sq mm nominal area, passing through existing PVC casing casing 'N' capping/ on wall/ roof surfaces, duly earthed with one run of single core PVC insulated FRLS cable with multi stranded copper conductor of size 1.5 sqmm nominal area green in colour as continues earthing wire connected to common earth dolly complete using existing switches,switch socket combination, fan regulators etc for one light/ fan point controlled by one single pole 5 amps switch/socket all as specified and as directed.

One light point controlled by one single pole 5 Amps switch

One fan point controlled by one single pole 5 Amps switch and regulator

One switch socket out let point 5 Amps on independent board

One switch socket out let point 5 Amps on same board with other switches

M & L Point wiring complete with 1100 volts grade single core, PVC insulated FRLS cable with multi-stranded copper conductor of size 2.5 sq mm nominal area, passing through heavy grade PVC casing casing 'N' capping/ of suitable size, with all necessary fittings on wall/ roof surfaces, duly earthed with one run of single core PVC insulated FRLS cable with multy stranded copper conductor of size 2.5 sqmm nominal area green in colour as continues earthing wire connected to common earth dolly including 1.6 mm thick fabricated CI/MS sheet terminal box concealed mounting in the wall , covered with 3mm thick electroplated bakelite sheet top cover for housing 15 A switches, 15A sockets all as specified and as directed.

M & L Point wiring complete with 1100 volts grade single core, PVC insulated FRLS cable with multi-stranded copper conductor of size 2.5 sq mm nominal area, passing through existing PVC casing 'N' capping/ PVC conduit on wall/ roof surfaces, duly earthed with one run of single core PVC insulated FRLS cable with multi stranded copper conductor of size 2.5 sqmm nominal area green in colour as continues earthing wire connected to common earth dolly complete using existing switches,switch socket combination, fan regulators etc for one light/ fan point controlled by one single pole 5 amps switch/socket all as specified and as directed.

Supply and fixing in repair Piano type switch single pole 5 Amps one way 230 volts all as specified and as directed

Supply and fixing in repair Piano type switch single pole 5 Amps two way 230 volts all as specified and as directed

Supply and fixing in repair bell push 5 amps ,230 volts all as specified and as directed

Supply and fixing in repair socket outlet 5pin multi purpose 5 Amps flush type all as specified and as directed

Supply and fixing in repair socket outlet 5 pin multi purpose 5/15 Amps flush type all as specified and as directed

Supply and fixing in repair switch 15A flush type universal pattern 230 v all as specified and as directed

Supply and fixing in repair PVC ceiling rose 65 x 50 mm surface type with 3 terminals all as specified and as directed

Supply and fixing in repair electronic fan regulator socketed step type upto 100 watts with 5 step speed control for fans any sweep 1200 mm/1400 mm. all as specified and as directed

Supply and fixing in repair call bell 230 v single pole fancy type Ding Dong Bell all as specified and as directed

Supply and fixing in repair LED lamp Adore 10W B22 Cdl Ball Lamp type 6500K all as specified and as directed

Supply and fixing in repair switch socket combination outlet 5 A , 5 pin Flush type all as specified and as directed

Supply and fixing in repair switch socket combination outlet multipurpose 2 in 1 , 5/15 A Flush type all as specified and as directed

Supply and fixing in repair straight/angle holder AC 230V all as specified and as directed

Supply and fixing in repair LED tuberod 20W Glass type with single/double side connection including necessary connection suitable for tuberod all as specified and directed

Supply and fixing in repair LED tuberod batten with internaly pre-wired all as specified and directed

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixing in repair LED light fitting, 36 watt 4'x1" , 230v recessed & surface LED 1X4 Flat Panel ceiling light with high performance, commercial grade solution suitable for hospitals including connecting up with twin core flexible copper conductor cable with suitable size all as specified and directed

Supply and fixing in repair LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder includingLED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilingrose complete all as specified and directed.

Supply and fixing in repair LED lights fitting 1x 22W, 220V,AC decorative box type with driver, holder includingLED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilingrose complete all as specified and directed.

S & F in repair LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fixing in repair suspension LED light fitting, 36watt classic styling with cutting edge technology to provide quality illumination and superior optical control. Use of direct/ indirect LED light engines makes it excellent choice for low heightceiling applications and areas where ceiling uniformity and indirect lighting is important (secondarysuspension kit included). including connecting up with twin core flexible copper conductor cable all as specified and as directed. Make : Havells Modal No DESTELLO 70 LP/S36WLED 857SPMMA

Supply and fixing round shape 15 watt 220 volts AC recessed/surface type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

M & L inreplacement of sub main wiring with Two single core PVC insulated cable with copper conductor multistranded 1100 volts grade 10 sqmm in and including heavy grade PVC casing and capping/PVC conduit and its accessories with fixing arrangements on surface, wall, floor or ceiling etc including 10 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC casing capping and two run of copper conductor together taken as one length for measuring unit length.

All as per serial item No 29 above but for 2x6 sqmmsqmm copper conductor cable 6 sqmm pvc insulated unsheathed copper earth continuity conductor.

All as per serial item No 29 above but for 2x4 sqmm copper conductor cable 4 sqmm pvc insulated unsheathed copper earth continuity conductor.

Supply and fixing in repair sub main wiring with four single core PVC insulated cable with copper conductor multistranded 1100 volts grade 6.0sqmm in and including heavy grade PVC casing and capping/PVC conduit and its accessories with fixing arrangements on surface, wall, floor or ceiling etc including 6 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed.. Note : One run of earth continuity conductor and four run of copper conductor including one run of PVC casing and capping together taken as one length for measuring unit length.

Supply and fixing in repair sub main wiring with four single core PVC insulated cable with copper conductor multistranded 1100 volts grade 10.0sqmm in and including heavy grade PVC casing and capping/PVC conduit and its accessories with fixing arrangements on surface, wall, floor or ceiling etc including 10 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed.. Note : One run of earth continuity conductorand four run of copper conductor including PVC casing and capping together taken as one length for measuring unit length.

Supply & fixing of sheet metal enclosure MCB DB double door type 230v with 4 ways SPN suitable bus bar inrepalcement of old unserviceable DB all as specified and directed

Supply & fixing of sheet metal enclosure MCB DB double door type 230v with 8 ways SPN suitable bus bar inrepalcement of old unserviceable DB all as specified and directed

Supply & fixing of sheet metal enclosure MCB DB double door type 230v with 12 ways SPN suitable bus bar inrepalcement of old unserviceable DB all as specified and directed

Supply & fixing of sheet metal enclosure MCB DB double door type 230v with 4 ways TPN suitable bus bar inrepalcement of old unserviceable DB all as specified and directed

Supply & fixing of sheet metal enclosure MCB DB double door type 230v with 6 ways TPN suitable bus bar model inrepalcement of old unserviceable DB all as specified and directed

Supply and fix inreplacement MCCB 125 Amps fixed thermal fixed magnetic setting, 430 volts, 16KA, 4 pole complete all as specified and directed.

Supply and fix inreplacement MCCB 100 Amps fixed thermal fixed magnetic setting, 430 volts, 16KA, 4 pole complete all as specified and directed.

Supply and fix inreplacement MCCB 63 Amps fixed thermal fixed magnetic setting, 430 volts, 10KA, 4 pole complete all as specified and directed.

S & F in replacement of old u/s MCB SP of 05 to 32A,'C' curve, 10KA rupturing capacity all as specified and as directed.

S & F in replacement of old u/s MCB SPN of 05 to 32A,'C' curve, 10KA rupturing capacity all as specified and as directed.

S & F in replacement of old u/s MCB SPN of 40 to 63A,'C' curve, 10KA rupturing capacity all as specified and as directed.

S & F in replacement of old u/s MCB TPN of 63A,'C' curve, 10KA rupturing capacity all as specified and as directed.

Supply and fixing in repair of Single pole and neutral enclosure with a two pin and earth plug and socket complete with single pole 20A MCB ,C curve , 10KA with metal clad top as all as directed.

Supply, fixing in repair PVC insulated stranded aluminium conductor flat, served with inner sheathing of PVC tape and overall PVC sheathed in service connections one twin core cable of size 6 Sqmm 1100v grade complete all as specified.

Supply, fixing in repair PVC insulated stranded aluminium conductor flat, served with inner sheathing of PVC tape and overall PVC sheathed in service connections one twin core cable of size 4 Sqmm 1100v grade complete all as specified.

M & L in repair earth continuity conductor GI Strip 25 x 4mm fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for direct/loop earthing with proper PVC/Porcelain insulator etc all as specified and directed .

M & L in repair earth continuity conductor copper Strip 20 x 3 mm fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for direct/loop earthing with proper PVC/Porcelain insulator etc all as specified and directed .

Supply and Fix in repair 25x3.15mm aluminium strip earth continuity conductor or main earthing lead fixed with porcelain /PVC insulator on wall or roof top floor or recess or chases or buried in ground or drawn in conduit/pipe or any other indicated situation for loop earthing etc complete all as directed

M&L in repair for earthing Complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common saft filling in alternate layers and electrode connection by using earth lead GI strp 25x 4mm dia by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and other end of the earth wire connected to main switch board protected by galvanised iron light grade pipe 15mm bore in wall/floor/and GI Pipe 20mm bore light grade for watering with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC pit cover including necessary excavation and earth work in any type of soil, returning slurry approved soil and disposed of surplus soil to a distance not exceeding 50 Mtr away all as shown in electrical plate No 3 of SSR 2009( Part-I).

All as per serial item No 52 above but using copper plate 60x60cmx3.15mm thick electrode and 20x3mm copper strip as earthing lead all as specified

S&F in repair of PVC Polymer/Porcelain insulator for existing GI/Aluminium/copper strip support all as specifed and directed

S & F in repair for Test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25mm, drilled and screwed including 3 Nos. 8mm dia 25mm long hexagonal head screw complete fixed on wall in and including sheet steel enclosure of thickness 2 mm thickness with locking arrangement complete all as specified and directed.

S&F In repair air termination single pointed copper rod 12mm dia and 300mm long fixed on GI pipe 15mm approx 1mtr hight with base firmly on the roof top using PCC of size 30x30x30 cm and necessary screws,saddles all as directed

S&F inreplacement air termination single pointed copper rod 12mm dia and 300mm long fixed on GI pipe 15mm approx 1mtr hight with base firmly on the parapet wall using necessary screws,saddles all as directed

M & L for Repair/Reconditiong of exisitng earth pit by removing damaged Earth PCC chambers and excavate pit soil upto 25% of earth plate/electrode and adding alternate layers of charcoal, mixture of salt and copper sulphate up to 15cm above the earth plate/electrode and moist the mixture using water , cleaning/replacing of funnel with wire mesh where ever necessary ,testing the earthing after reconditioning that the earth resistance value should not be morethan 1.5 Ohms , making good to distrubed surface and all as specified and directed at site. Note: 1. Deemed including excavation, returning filling and connected items. 2. Salt , charcoal , copper Sulphate, pit chamber , Testing will be measured and paid seperatly

Supply only pure charcoal granular/aggregate type having Ash content < 5% , stone free for earthing

Supply only iodine free pure common salt crystal ( NaCl) for earthing

Supply only copper sulphate crystal (CuSO4) for earthing

M & L for Testing of earth resistance of existing earthing using calibrated 3/4 wire digital Earth resistance tester and recording the earth resistance value in register , obtaining the signature of user and MES executive after verification all as specified and directed by the Engr in charge. Note:- contractor has to provide digital earth resistance tester and should be available all the time during the contract period.

Material and labour for taking down the ceiling fans 1200/1400mm at site of any make and servicing of ceiling fan complete with greasing incl refixing the same after servicing checking properly by removing and replaced the unsv parts such as nut bolts, split pins rubber reel,necessary threading for rods etc.re-connecting the fans to ceiling rose/connector complete with 23 / 0.0076 " flexible twin core copper conductor cable from fan to ceiling rose/connector (rubber reel to be measured and paid against relevant items) and re-assembling the same with proper accessories and testing complete all specified and directed.

Material and labour for taking down the exhaust fans 300/380/450 mm at site of any make and servicing of exhaust fan complete with greasing refixing the same after servicing checking properly by removing and replaced the unsv parts such as nut bolts, pins rubber bushes etc.re-connecting the fans to ceiling rose/connector complete with 23 / 0.0076 " flexible twin core copper conductor cable from fan to ceiling rose/connector and re-assembling the same with proper accessories and testing complete all specified and directed.

Material and labour for taking down the wall mounted fan at site of any make and servicing of wall mounting fan complete with greasing refixing the same after servicing checking properly by removing and replaced the unsv parts such as nut bolts, split pins etc.re-connecting the fans to ceiling rose/connector complete with 23 / 0.0076 " flexible twin core copper conductor cable from fan to ceiling rose/connector and re-assembling the same with proper accessories and testing complete all specified and directed.

Supply and fixing ball bearing in replacement as per existing for ceing fan/exhaust fan/wall mounted fan.all as specified and directed.

S&F inreplacement rubber reel of suitable size for ceiling fan with necessary clamp and nut & bolt complete all as specified and directed.

S&F in repair rubber reel of suitable size for ceiling fan complete all as specified and directed.

S&F in repair capacitor of cap 2.5 MFD paper type for fans complete all as specified and directed.

S&F in repair capacitor of cap 3.15 MFD paper type for fans complete all as specified and directed.

S&F in repair capacitor of cap 4 MFD paper type for fans complete all as specified and directed.

S&F in repair gun metal bush of size suitable for ceiling fan shaft complete all as specified and directed.

M&L for taking down ceiling fan ,sealing cable end dismantling blades and removing unserviceable fan and blades to store for repair all as specified and directed

M&L for hanging only ceiling fan and connecting up including provision of cable from ceiling rose /connector to fan all as specified and directed

M&L for rewinding of ceiling fan with super enamel copper wire as per existing size/gauge to achieve the required RPM as per manufacturers design including proper heating varnishing and provision of insulating etc and testing complete all as specified and directed.

Ceiling fan of size 1200mm sweep

Ceiling fan of size 1400mm sweep

M&L including taking down, for fan hook on RCC ceiling made by MS flat iron of size 40 x 5 mm and 66 cm length incl no nut bolt with wahser of size, suitable for hanging with pipe/angle/I section complete all as specified.

M&L for taking down exhaust fan ,sealing cable end dismantling blades and removing unserviceable fan and blades to store for repair all as specified and directed

M&L for fixing only exhaust fan and connecting up including provision of cable from ceiling rose /connector to fan all as specified and directed

M&L for rewinding of exhaust fan with super enamel copper wire as per existing size/gauge to achieve the required RPM as per manufacturers design including proper heating varnishing and provision of insulating etc and testing complete all as specified and directed.

Exhaust fan of size 300mm to 380mm sweep

Exhaust fan of size 400mm to 450mm sweep

M&L for taking down unserviceable wall mounting fan to store for repair all as specified and directed

M&L for fixing only wall mounted fan and connecting to socket all as specified and directed

M&L for rewinding of wall mounting fan with super enamel copper wire as per existing size/gauge to achieve the required RPM as per manufacturers design including proper heating varnishing and provision of insulating etc and testing complete all as specified and directed.

wall mounting fan of size 400mm sweep

wall mounting fan of size 450mm sweep

S & F in repair of exhaust fan blade metal body suitable for 450 mm. all as specified and directed.

S & F in repair of exhaust fan blade metal body suitable for 300 to 380mm. all as specified and directed.

S&F in repair of ceiling fan blade for 1200mm sweep metal body all as specified and directed.

S&F in repair of ceiling fan blade for 1400mm sweep all as specified and directed.

S&F in repair of fan blade for wall mounting fan 400/450mm acrylic body all as specified and directed.

M&L for spary painting of ceiling fan complete in situ after necessary preparation of surfaces of ceiling fans of any size make complete and painting with one coat of synthetic enamel paint including filling cavities with filler after cleaning all dust etc and rewriting of MES Number etc complete all as specified and directed.

M & L for detecting faults at site of ceing fan,exhaust fan,wall mounting fan any type and make in CHAF area under AGE EM CHAF and rectifiying the defects and make functional including replacing of unserviceable defective electrical/spares accessories Note :- (i) Rate for any item shall be measured and paid under respective item of schedule (ii) Essential material like, insulation tape,screws and all tools required for carrying out the works and instruments to the detect fault shall be deemed to be included in the quoted rate (iii) The work is of day to day maintenace, required Electricians and Helper has to be attend daily for carryout the above work. (iv) Non rctification of complaints penal charge of Rs 300/- per complaint shall be imposed.

Taking Down and Refixing incl Painting of water heaters (Geysers) of following capacity of any make/model in site with synthetic enamel paint by brush including filling of cavities with fillers one coat after cleaning all dust etc including writing MES numbers etc all as specified and directed for :

Water heater 25 litres capacity.

Water heater 50 litres capacity.

Water heater 80 litres capacity.

Dismantling following unserviceable items/parts from water heaters of any capacity/make/model, supply and fix inreplacement with new items/parts of same capacity/type/model, connecting up and testing :-

Heating element 1.5 KW capacity AC 230 V and conforming to IS specifications screw/flange type.

Heating element 2.0 KW capacity AC 230 V and conforming to IS specifications screw/flange type.

Thermostat suitable for water heater upto 80 litres capacity.

Indicator lamp any type (red/green)suitable for water heaters upto 80 litres capacity.

Non return valve 15 mm dia size.

PVC connection 15mm size with PTMT nuts of length 300mm for hot water supply.

PVC connection 15mm size with PTMT nuts of length 300mm for cold water supply.

Rubber gasket flat/'O' ring type suitable for water heater

PVC insulated and FR PVC Round Sheathed, Copper Conductor(flexible) industrial cable, 1100 Volts 3 core flexible copper conductor cable of size 2.5 sqmm

Plug top 3 pin 15 amps all as directed..

Pressure release safety valve suitable for geysers upto 80 litres capacity. all as directed.

M&L in replacement old rusted /worn out MS bolts and nuts and grouting 4 nos new MS "T" bolts and nuts in brick walls ( MS bolt size 3/8 " x 6" with washers ) and making good the disturbed surfaces incl plastering , curing etc all as directed.

M&L in replacement the Geysers from building and taking out the inner container(copper) and repairing the cracks by soldering /gas welding/Tinkering and reassembling the inner container, sealing the gap and refixing in same position of the building and testing

Supply and filling with compact packing of glass wool of suitable thickness for water heater of following capacity

Water heater 25 litres capacity.

Water heater 50 litres capacity.

Supply and fixing in reapir bottom assembly apparatus plate of copper for water heater of following capacity suitable to accommodate Thermostat, Heating Element as existing

Water heater 25 litres capacity.

Water heater 50 litres capacity.

Supply and fixing in repair outer body assembly complete with top and bottom for water heater of following capacity

Water heater 25 litres capacity.

Water heater 50 litres capacity.

S&F bib taps cast copper alloy with clutch or butterfly handle screwed for GI pipe 15mm dia chromium plated fency type.

S&F in repair Stopcock cromium plated screwed down High pressure with crutch or butterfly handle screwed both ends for iron pipe or for union completebib taps cast copper alloy with clutch or butterfly handle screwed for GI pipe 15mm dia complete

M & L for detecting faults at site geysers any type and make in CHAF area under AGE EM CHAF and rectifiying the defects and make it functional including replacing of unserviceable defective electrical/spares accessories Note :- (i) Rate for any item shall be measured and paid under respective item of schedule (ii) Essential material like, insulation tape,screws and all tools required for carrying out the works and instruments to the detect fault shall be deemed to be included in the quoted rate (iii) The work is of day to day maintenace, required Electricians and Helper has to be attend daily for carryout the above work. (iv) Non rectification of complaints penal charges of Rs300/- per complaint shall be imposed.

Supply and fixing in repair of Single pole and neutral enclosure with a two pin and earth plug and socket complete with single pole 20A MCB ,C curve , 10KA as all as directed.

M&L for descaling of geyser any capacity including inner container and bottom apparatus using rod, brush and soda lime and made serviceable complete all as specified and directed

Varsha Enterprises

GKR and CO