MLA FUND 2023-24 - Construction of sintex at van stand at ward no-26 in kadayanallur municipality

Amount

Geological suevey for new bore well point.

Drilling of borewells of size 4" to 5" dia. in sedimentary formation using hand boresets including insertion of casing pipes and removal of casing pipes etc., including collection of samples a directed by the TWAD Board Officers, including supplying and packing of pebbles and conveyance of hand boresets including loading and unloading etc., complete(page 301/SOR 2022-23)

Supplying and Delivery of 150mm dia PVC casing Pipe CS AS PER IS 12818 / 2010 including cost Materials and Transportation etc complete (CM)

Supply and deliver of single phase compressure motor with ISI marking as per specification for the duty condition with suitable for installation in 110mm dia borewell etc complete (1.50HP× m duty condition)

Supply of 1.50Hp compressure motor's starter including cost conveyance to site etc complete.

Labour Charges for erection of Horizontal shaft, centrifigal pumpset (Coupled/Monoblock) in borewell/ Openwell including fixing of suction pipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves, pressure guages up to the exterior wall of pump room and erection of panel Board consisting of TPIC switches starter, Voltmeter, Ammeter, Capacitor single phasing preventor and laying and jointing the cables and twin earthing as per IE rules including providing bed blocks etc., Complete and operating the pumps and trail run for 10 days including signing of completeion of reports as required by EB Authorities (Up to 3 HP)

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and Eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Supplying, fabricating and placing in position of Steel Reinforcement using Mild steel or Ribbed tor steel rods, for all RCC works as per the design given by the departmental officers including cost of steel cutting, bending,placing in position and binding with binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete as per SS

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38

Reinforced cement concrete 1:1½:3 (one cement and half sand and three aggregates) using 20mm ISS HBG metal including cost of all materials and labour charges for mixing, laying, finishing and curing etc. complete but excluding cost of steel & centering ch

Plastering with CM 1:5 mix, 12mm thick and including cost and conveyance of all materials to site and all labour charges and all other incidental charges etc., complete as per standard specification.

White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials, brushes scaffolding charges, etc., complete complying with standard specification.

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m

Abdul Malik (BID ID -1189940)