Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.1 LAccepted-Finance | L1 | Accepted-Finance After considering the voluntary and unconditional reduction of rate, it is recommended for acceptance of tender of the lowest tenderer Sudeep Bose | |
| 2 | L2₹2.3 L+₹19,780 (9.61%)Rejected-Finance | L2 | Rejected-Finance After considering the voluntary and unconditional reduction of rate, it is recommended for acceptance of tender of the lowest tenderer Sudeep Bose | |
| 3 | L3₹2.3 L+₹24,255 (11.8%)Rejected-Finance | L3 | Rejected-Finance After considering the voluntary and unconditional reduction of rate, it is recommended for acceptance of tender of the lowest tenderer Sudeep Bose |
Tender Value
₹1.9 L
EMD Value
₹3,815
Closing Date
25 Feb 2023, 3:00 pmClosed
Executive Engineer(C)
BSNL Civil Division, Door Sanchar Bhawan, Link Road, Cuttack
Repairing of leakage to the roof top of Telephone Exchange building (Technical portion ) at Rairangpur under Baripada SSA
2023_BSNL_145504_1
27/2022-23/BSNL-CD/CK/SD-BLS
Open Tender
Civil Works - Others
Item Rate
31 days
Rairangpur
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹3,815
30 Mar 2023
14 Feb 2023
27 Feb 2023
14 Feb 2023
25 Feb 2023
14 Feb 2023
14 Feb 2023 - 25 Feb 2023
Amount
Making Khurras 45X45cm with average minimum thickness of 5 cm cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate of 20mm mnominal size ), finished with 12 mm cement palster 1:3 ( 1 cement : 3 coarse sand ) and a coat of neat cement rounding the edges and making and finishing the outlet complete including dismantaling existing Khurra and disposal of the unserviciable material upto lead of 50 Metre
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes:
110 mm diameter
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion.
Bend 87.5° : 75 mm bend
Shoe (Plain) : 110 mm Shoe
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per square metre, including preparation of surface but excluding grading complete with :
Bitumen felt (hessian base) type 3 grade I conforming to IS : 1322
Deduct for omitting in water proofing treatment final course of spreading stone grit 6 mm down size or pea sized gravel :
at 6 cudm per sqm
15 mm cement plaster on rough side of single or half brick wall of mix :
1:4 (1 cement: 4 coarse sand)
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall
25 mm nominal outer dia .Pipes.
Cleaning the top of roof surface by removing the old damaged bitumen feltsand making the roof top surface ready to receive the fresh water proofing treatment etc. including dispossal of rubbish beyond municipal area complete as per direction of Engineer in charge.
Providing & fixing 25mm nominal bore CPVC Gate valve of approved brand all complete as per the direction of Engineer-in-charge .
MEERA AGARWALA
RAM PRASAD AGARWALLA
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .