Purchase of Table and Chair and Aluminium Partition to General Section, E Seva Section, Office Meeting Hall Table,Counsil Hall Side Wall Paanels , Reciption Area Backround Wall Pannel Section for New Office Building in Adirampattinam Municipality.

Amount

Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish and half PLB board using 12 mm thick PLB board Alu.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, Al. Clips, Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections.

Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish and half PLB board using 12 mm thick PLB board Alu.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, Al. Clips, Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections.

Manufacturing, Supply and delivery of Executive table size 6'0"x3'0"x2'6", ( OFFICE MEETING HALL) using 18mm thick Antitermite water proof ply and top of table should be covered with laminated partice board with drawers and cabinets with necessary accessories and two coats best varnish on the inside of the table and the sides of plywood should be lipping with teak wood beading and with two coats of varnish etc., complete. All the materials to be used should got approved by the departmental officers before use on work. The rate includes cost of materials labour charges, conveyance, neat finishing, fixing etc.,

Providing wall paneling butting to the wall and ceiling with new wall paneling in Counsil Hall BOTH SIDE Stage back ground 33' x 10' using Country wood scantlings of size 100 X 50mm for forming of grid of size 0.60m X 0.60m. Country wood runners as stiffness using 50mm X 50mm for required length spaced at 0.2m intervals on both direction and fixing to the exiting wall portion and ceiling. Over the frame 12mm thick anti terminate water proofing ply wood using nails etc., and adhesive pasting the 1mm laminate ply with grooves using fevicol, nails. The rates inclusive of labour for wrought and put up and two coat of best varnishing, neat finishing, fixing in position etc.,

Providing wall paneling butting to the wall and ceiling with new wall paneling in all floors using Country wood scantlings of size 100 X 50mm for forming of grid of size 0.60m X 0.60m. Country wood runners as stiffness using 50mm X 50mm for required length spaced at 0.2m intervals on both direction and fixing to the exiting wall portion and ceiling. Over the frame 12mm thick anti terminate water proofing ply wood using nails etc., and adhesive pasting the 1mm thick laminate ply with grooves using fevicol, nails. The rates inclusive of labour for wrought and put up and two coat of best varnishing, neat finishing, fixing in position etc.,

M.Krishnaveni (BID ID -1422021)