NIT NO:40 /RMC/2026 RAIPUR DATED: 24-02-2026

Superintending Engineer Public Works Department Raipur Circle No-1 Raipur

बजट वर्ष 2022-23 में शामिल शासकीय चिकित्सा महाविद्यालय, रायपुर में कार्यरत तृतीय एवं चतुर्थ श्रेणी कर्मचारियों हेतु शासकीय आवासीय भवन का निर्माण कार्य के लिए आर्किटेक्ट (वास्तविद) नियुक्ति करनs बाबत्। ( Chhattisgarh )

( FIRST STAGE ESTIMATE )

Sl.N. PARTICULARS DSR AMOUNT MR AMOUNT UNIT PLINTH AREA RATE ( per sq.mt.) AMOUNT

1 Civil Works of तृतीय एवं चतुर्थ श्रेणी ( आवासीय भवन) #REF! #REF! sqmt. 4015.0 14500.0 58,217,500.00

(A) SUB - TOTAL 0.00 SUB - TOTAL 58,217,500.00

2 Electrification work. (Outdoor Lighting (fixtures and wiring) 14% of cost of civil work. 9,169,510.00

3 Water supply, sanitry work & Site Drainage work 12% of cost of civil work. 6,986,100.00

4 Site Development ( like boundary wall, under ground tanks, driveway etc. 11% of cost of civil work. 6,403,925.00

5 For contingencies. 2.0% 1,615,540.70

6 For Architectural Consultancy charges. 2.50% 2,019,425.88

Sub Total ( C ) 3,634,966.58

GRAND TOTAL (A+B+C ) 84,412,001.58

Say Rupees Eight Crores Fourty Five Lacs only

BUILDING WORKSHOP

Superintending Engineer Public Works Department Raipur Circle No-1 Raipur

बजट वर्ष 2022-23 में शामिल शासकीय चिकित्सा महाविद्यालय, रायपुर में कार्यरत तृतीय एवं चतुर्थ श्रेणी कर्मचारियों हेतु शासकीय आवासीय भवन का निर्माण कार्य के लिए आर्किटेक्ट (वास्तविद) नियुक्ति करनs बाबत्। ( Chhattisgarh )

Sl. No. DESCRIPTION DSR Amount MR Amount

1 CIVIL WORK #REF! #REF!

TOTAL (A) #REF! #REF!

2 ELECTRICAL WORK

i Washrooms / Restrooms #REF!

ii Outdoor Lighting (fixtures and wiring) 70,000,000.00

iii Soalr panels System 15,000,000.00

iv General Lighting 60,000,000.00

3 PLUMBING WORKS

i Washrooms / Restrooms #REF!

ii Storm Water Management 1,000,000.00

iii Irrigation System 2,400,000.00

TOTAL (C) 0.00 #REF!

4 Site Development

i HORTICULTURE AND LAND SCAPING #REF! #REF!

ii Landscape Fruniture (seaters, dustbins, Tree grating, Signages, drinking water fountain) 30,000,000.00

iii Stone Collonades at the Entrance Plaza 5,000,000.00

iv statue 20,000,000.00

v entrance Portal and Gates 1,000,000.00

vi Temporary Food Kiosks 2,500,000.00

TOTAL (D) #REF! #REF!

TOTAL (A+B+C+D) #REF! #REF!

COST INDEX ON DSR AMOUNT @ 11% #REF! 2160 D-WALL

GRAND TOTAL #REF! 4.1 GSB

For contingencies @ 2% #REF! 3.3.1 m-20

For Architectural Consultancy charges @ 2.5% #REF! 3.3.2 m-25

GRAND TOTAL #REF! 12.49 KOTA

9.2 PARKING SHED

310 filliter media

Sl. No. SOR / MR DESCRIPTION UNIT #REF! #REF! #REF! #REF! #REF! #REF! #REF! #REF! Planter Feature Wall Watch Tower Landscape TOTAL QTY. RATE Amount

Shiv Bhagwan Statue

1 NON SOR ITEM Supplying good quality of Sandstone ( shade: as per approval by Engineer-in-charge ) in various elements for all levels, inlcuding the cost of oranmental stone work and mouldings of diffrent shape and designs, CNC cut moulding, pins, fastner,nuts,bolts,adhesives,rubbing,polishing, cleaning ,making platform by same stone finish, carvings on difftrent levels as required, the stone of varied thickness shall be used for stacking and all the stone work and stone deigner elements to complete the statue of Shiv Bhagwan as per the detailed design and drawings are included . Also includes the cost of structural load calculation and design with respect to the detailed design and drawing recevied from architect in charge. Preferable tentative size 3.0 m in height and base of 1.0 mt OR tentative Size, design and drawing to be approved by the Engineer in charge and Architect in charge by the means of detaild shop drawing, designs and sample preparation by the contractor. Nos. 1.00 0.00

2 NON SOR ITEM Supplying good quality of Red Sandstone ( shade: as per approval by Engineer-in-charge ) in various elements for all levels, inlcuding the cost of oranmental stone work on diffrent level platforms of shivling , base dia of shivling platform tentative 4.2 mts, mid level platform dia 3.5 mt and top shivling dia 1200 mm and mouldings of diffrent shape and designs, CNC cut moulding, pins, fastner,nuts,bolts,adhesives,rubbing,polishing, cleaning ,making platform by same stone finish,making surface for placement, carvings on difftrent levels as required, the stone of varied thickness shall be used for stacking and all the stone work and designer elements of stone to complete the Shivling and good for use, as per the detailed design and drawings are included . Also includes the cost of structural load calculation and design with respect to the detailed drawings and designs drawing recevied from architect in charge. Preferable tentative overall size 3m in height OR tentative Size, design and drawing to be approved by the Engineer-in-charge and Architect in charge by the means of detailed shop drawing and sample preparation by the contractor. Nos. 1.00 0.00

3 NON SOR ITEM Providing ,supplying & Fixing in position of good quality of Sandstone ( shade: as per approval by Engineer-in-charge ) in various elements for all levels, inlcuding the cost of oranmental stone work, mouldings of diffrent shape and designs, CNC cut moulding, pins, fastner,nuts,bolts,adhesives,rubbing,polishing, cleaning ,making platform by same stone finish,making surface for placement, carvings work on difftrent levels as required, the stone of varied thickness shall be used for stacking and all the stone work and stone deigner elements, to complete the Trishul including damru,artwork and trishul on top work as per the detailed design and drawings are included . Also includes the cost of structural load calculation and design with respect to the detailed design and drawing recevied from architect in charger. and approved by Engg-in-charge, Fixing of Trisul (including M.S.work, Paint work etc). Height of Trisul 2.1mt fixing with M.S.frame (25x50x5) with fastner and finsih with enamel paints of approved shade complete and good for use. . design and drawing to be approved by the Engineer-in-charge and Architect in charge by the means of detailed shop design and drawings and sample preparation by the contractor. Nos. 4.00 0.00

4 NON SOR ITEM Providing ,supplying & Fixing in position of good quality of Red Sandstone ( shade: as per approval by Engineer-in-charge ) in various elements for all levels, inlcuding the cost of oranmental stone work and mouldings of diffrent shape and designs, CNC cut moulding, pins, fastner,nuts,bolts,adhesives,rubbing,polishing, cleaning ,making platform by same stone finish,making surface for placement, carvings on difftrent levels as required, the stone of varied thickness shall be used for stacking and all the stone work and stone deigner elements to complete the Tekra work as per the detailed design and drawings are included . Also includes the cost of structural load calculation and design with respect to the detailed design and drawing recevied from architect in charger. and approved by Engg-in-charge. Fixing of Tekra (including hollow pipe work, Paint work etc). Preferable tentative size - Tekra Stone: (550 X 650 X 150 mm.Thick) fixing with M.S.frame (25x50x3) with fastner and finsih with enamel paints complete and good for use. and aprroved by engg-in-charge. design and drawing to be approved by the Engineer-in-charge and Architect in charge by the means of detailed shop drawing and sample preparation by the contractor. Sqm. 700.00 0.00

5 NON SOR ITEM Providing,Supplying, designing, fabricating, transporting, hoisting and fixing in position approved mural works in Multi Color Sandstone ( shade: as per approval by Engineer-in-charge ) in various elements for all levels, inlcuding the cost of oranmental stone work and mouldings of diffrent shape and designs, CNC cut moulding, pins, fastner,nuts,bolts,adhesives,rubbing,polishing, cleaning ,making platform by same stone finish,making surface for placement, carvings on difftrent levels as required, the stone of varied thickness shall be used for stacking and all the stone work and stone deigner elements to complete the Mural work and good for use ,as per the detailed design and drawings are included (Exposed face machine cut and table rubbed , polished with rough backing. .75 mm thick outer frame and 40 mm thick internal design elements machine cut edges) for wall lining etc. (veneer work) upto 3 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : red sand stone - design and drawing to be approved by the Engineer-in-charge and Architect in charge by the means of detailed shop drawing and sample preparation by the contractor. Sqm. 370.00 0.00

SAND STONE BENCH

6 NON SOR ITEM Providing ,supplying & Fixing in position of Red sand stone bench ( shade: as per approval by Engineer-in-charge ) with precise Dimnsion of 1500mm in length 450mm in width and 600mm in height , 100 mm thick sitting platform complete with detailed carving and ornamentation and designer logo rubbing, ploishing all the fastners, adhesives , nut and bolts , of approved design .The carving and ornamentation must be executed by skilled artisans to ensure intricate and precise details that match the design. specifications. Installation includes preparing a suitable foundation, which involves excavation, concrete pouring, and leveling to ensure a stable base. It must be securely fixed to this foundation, with all necessary support structures in place to maintain stability. The Red Sand Stone selected for this bench must be of high quality, suitable for the intended environment, and in accordance with the design and drawing to be approved by the Architect in charge & Engg in charge by the means of detailed shop drawing and sample preparation by the contractor. Nos. 92.00 0.00

7 NON SOR ITEM Providing ,supplying & Fixing in position of Red Stone barricade ( shade: as per approval by Engineer-in-charge ) having S.S. Plate with S.S. studs and wheels of (as per design) as approved by engg-in-charge Preferable tentative size 1100 mm height x1500mm length ,Barricade Constructed in Various Stone Elements (i.e. 2 No’s of Column (Base's 350 X 350mm, having 4mm Thk. SS 304 Base Plate, & 150mm X 150mm Solid Vertical Stone Designer Pillar And 5 No's Of 65mm X 65mm Solid Stone Designer Pillar Fixed on Bottom and Top Rail (125mm X 100mm Ht.) (Having 4mm Thk. Ss304 Base Plate).This Barricade is Mounted on two pair Double assambly Heavy Duty SS Wheels, This Barricade is included with the Stone Curve Edges, Polishing, Carving Work, Designer Top Coping and Design Element works on Both the Pillars, Base, Top Coping and As Per The Detailed Design And Drawings complete and good for use, in accordance with the design and drawing to be approved by the Architect in charge & Engg in charge by the means of detailed shop drawing and sample preparation by the contractor. Sqm. 75.75 0.00

8 NON SOR ITEM Providing ,Fixing, Supplying & transporting of Red sand stone bollard ( shade: as per approval by Engineer-in-charge ) of size 250 mm dia ( top dia : 150 mm ) X 1000mm height, finish: ( shade: as per approval by Engineer-in-charge ) in various elements for all levels,shapes, inlcuding the cost of oranmental stone work and mouldings of diffrent shape and designs, CNC cut moulding, pins, fastner,nuts,bolts,adhesives,rubbing,polishing, cleaning ,making platform by same stone finish,making surface for placement, carvings on difftrent levels as required, the stone of varied thickness shall be used for stacking and all the stone work and stone deigner elements to complete the Stone Bollard work as per the detailed design and drawings are included .t inlcuding rate of engraving and illustrations design and drawing. Bollard should be fixed complete and good for use. (Excavation,PCC,Labour,Machinery Etc) and in accordance with the design and drawing to be approved by the Architect in charge & Engg in charge by the means of detailed shop drawing and sample preparation by the contractor. Nos. 100.00 0.00

9 NON SOR ITEM Providing and Fixing of (G.R.C) Embossed Panel in approved pettern with size 900mm x 900mm Thickness 50mm GRC member finish with all fitings & all Heights fixing , paint work , secrews, fastners, adhesives ,nut , bolts MS plates, cleat etc Fixed With MS Hollow Pipe With Size 50 x 50 x 5 mm, In all level Lift and lead GRC Sheet fixed in Hollow pipe with fastner,screw, nuts ,adhesives and applying a priming coat of red oxide zinc chromate primer and enamel paints as per GRC in all structure steel incluing scaffolding etc complete and good for use and in accordance with the design and drawing to be approved by the Architect in charge & Engg in charge by the means of detailed shop drawing and sample preparation by the contractor.

At Feature Wall Nos. 350.00 0.00

10 NON SOR ITEM Providing and Fixing of (G.R.C) Arch in approved pattern with size 575mm x 225mm Thickness 150mm GRC member finishwith all fitings, paint & all Heights ,paint work , secrews, fastners, adhesives ,nut , bolts MS plates, cleat etc Fixed With MS Hollow Pipe With Size 50 x 50 x 5 mm, In all level Lift and lead GRC Sheet fixed in Hollow pipe with fastner and applying a priming coat of red oxide zinc chromate primer & enamel paints as per GRC in all structure steel incluing scaffolding etc complete and good for use and in accordance with the design and drawing to be approved by the Architect in charge & Engg in charge by the means of detailed shop drawing and sample preparation by the contractor.

At Feature Wall Nos. 170.00 0.00

11 NON SOR ITEM Providing and Fixing of (G.R.C) Big Arch in approved Pettern With tentative size 2100 mm x 750 mm Thickness 50 mm GRC member with all fitings & all Heights , paint work , secrews, fastners, adhesives ,nut , bolts MS plates, cleat etc Fixed With MS Hollow Pipe With Size 50 x 50 x 5 mm, In all level Lift and lead GRC Sheet fixed in Hollow pipe with fastner and applying a priming coat of red oxide zinc chromate primer & enamel paints as per GRC in all structure steel incluing scaffolding etc complete and good for use and in accordance with the design and drawing to be approved by the Architect in charge & Engg in charge by the means of detailed shop drawing and sample preparation by the contractor.

At Feature Wall Nos. 350.00 0.00

12 NON SOR ITEM Providing and Fixing of (G.R.C) Big Arch in approved Pettern With tentative size 5170mm x 2740mm Thickness 150mm GRC member with all fitings & all Heights ,paint work , secrews, fastners, adhesives ,nut , bolts MS plates, cleat etc Fixed With MS Hollow Pipe With Size 50 x 50 x 5 mm, In all level Lift and lead GRC Sheet fixed in Hollow pipe with fastner and applying a priming coat of red oxide zinc chromate primer & enamel paints as per GRC in all structure steel incluing scaffolding etc complete and good for use and in accordance with the design and drawing to be approved by the Architect in charge & Engg in charge by the means of detailed shop drawing and sample preparation by the contractor.

At Archway/Gateway Nos. 5.00 0.00

13 NON SOR ITEM Providing and Fixing of (G.R.C) Small Arch in approved Pettern With tentative size 3500mm x 1975mm Thickness 150mm GRC member with all fitings & all Heights ,paint work , secrews, fastners, adhesives ,nut , bolts MS plates, cleat etc Fixed With MS Hollow Pipe With Size 50 x 50 x 5 mm, In all level Lift and lead GRC Sheet fixed in Hollow pipe with fastner and applying a priming coat of red oxide zinc chromate primer & enamel paints as per GRC in all structure steel incluing scaffolding etc complete and good for use and in accordance with the design and drawing to be approved by the Architect in charge & Engg in charge by the means of detailed shop drawing and sample preparation by the contractor.

At Archway/Gateway Nos. 10.00 0.00

14 NON SOR ITEM Providing and Fixing of (G.R.C) inner Arch in approved Pettern With tentative size 3000mm x 1210mm Thickness 150mm GRC member with all fitings & all Heights , paint work , secrews, fastners, adhesives ,nut , bolts MS plates, cleat etc Fixed With MS Hollow Pipe With Size 50 x 50 x 5 mm, In all level Lift and lead GRC Sheet fixed in Hollow pipe with fastner and applying a priming coat of red oxide zinc chromate primer & enamel paints as per GRC in all structure steel incluing scaffolding etc complete and good for use and in accordance with the design and drawing to be approved by the Architect in charge & Engg in charge by the means of detailed shop drawing and sample preparation by the contractor.

At Archway/Gateway Nos. 20.00 0.00

15 NON SOR ITEM Providing and Fixing of (G.R.C) Big Arch in approved Pettern With size tentative 9800mm x 2850mm Thickness 150mm GRC member with all fitings & all Heights ,paint work , secrews, fastners, adhesives ,nut , bolts MS plates, cleat etc Fixed With MS Hollow Pipe With Size 50 x 50 x 5 mm, In all level Lift and lead GRC Sheet fixed in Hollow pipe with fastner and applying a priming coat of red oxide zinc chromate primer & enamel paints as per GRC in all structure steel incluing scaffolding etc complete and good for use and in accordance with the design and drawing to be approved by the Architect in charge & Engg in charge by the means of detailed shop drawing and sample preparation by the contractor.

At Enterance MainGate Part-B Nos. 4.00 0.00

16 NON SOR ITEM Providing and Fixing of (G.R.C) Window Set ,in approved Pettern With tentative size 900mm x 900mm Thickness 50mm GRC member finish with exterior emlusion Paints with all fitings & all Heights etc Fixed With MS Hollow Pipe With Size 50 x 25 x 5 mm, In all level Lift and lead GRC Sheet fixed in Hollow pipe with fastner and applying a priming coat of red oxide zinc chromate primer & enamel paints as per GRC in all structure steel incluing scaffolding etc complete and good for use in accordance with the design and drawing to be approved by the Architect in charge & Engg in charge by the means of detailed shop drawing and sample preparation by the contractor.

At Wall Nos. 170.00 0.00

17 NON SOR ITEM Supply,Installation,Testing & Commissioning of Cast iron-Grooved Mild steel combo ornamental pole with double arm bracket & two Nos. of Cast & Spun aluminium decorative street light luminaire as per attached drawing. The total height of the pole with double arm bracket shall be 4000 mm nominal. The Pole is made out cast iron embellishments and Grooved mild steel tube with built-in control box at the bottom. A Control box accommodates a 6 amp MCB & 32 amp connector for mains connections. The Double Arm bracket is made out of M.S. round tubular Pipe sections , Cast Iron and Cast Aluminium casting . The different pipe sections ,sheet and Cast iron Parts are joined together and fabricated as per Design shown in the attached drawing. The decorative street light luminaire is made out of cast & spun aluminium. Each decorative street light luminaire shall be in 2 x 54 w LED having LED CCT of 3000/4000/6000 k as per the instructions of engineer in charge. Transparent Polycarbonate Diffusers shall be fitted in the decorative street light . The decorative street light shall have external surge protection of 10kV with driver standard voltage withstand range of 100-300 V AC. Integrated suitable BIS approved LED Driver to be fitted inside the Luminaries, having efficiency > 85% . power factor shall be >0.9, and inbuilt Surge protection of 4kv. Led shall be of >= 1 w Osram/Seoul/Bridgelux or any reputed make. The Luminous efficacy of Luminaire shall be greater than 120 lumens/watt .The Impact resistance of Decorative street light shall be Minimum IK08 .The shape and sizes of the decorative street light shall be as per attached drawing. System life of 50,000 burning hours with 70% of initial lumens maintained. The ingress protection of optical area of street light shall be IP-66 level. The Pole , Bracket and decorative street light shall be machined and polished properly to give it a smooth surface. The Cast iron- Grooved Mild steel combo pole , Double arm bracket and decorative street light shall be duly pretreated by shot blasting and sanding process and shall be painted/ Powder coated in Polyurethane/Polyester Coating as per Colour shade required by engineer in charge. The coating on the pole, Bracket and Luminaire shall be baked in the oven at required temperature. The coating on the pole and Luminaire shall pass a minimum of 300 salt spray hours and shall have minimum 90 microns coating.Erection of pole on existing cement concrete foundation having grouted bolts and nuts and having designer Trishul on top,designer arms and decorative jaali and designer work on pole , aligning in true vertical position as per specification. as per approval by Engineer-in charge

18 Stone work (machine cut edges) for wall lining etc. (veneer work) up to 10 meter height backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of clamps which shall be paid for separately):

Red sand stone - exposed face fine dressed with rough backing.

40 mm thick. Sqm #REF! #REF! 2889.40 0.00

19 Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases. EACH 8668.21 0.00

20 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. Red sand stone Sqm #REF! #REF! 25.00 0.00

21 Providing, laying and jointing following P.V.C. - U pipes with solvent cement joint for Non-pressure gravity drain and sewer applications including testing of joints, cost of jointing materials etc. complete in all respect. [Conform to IS 15328:2003, solvent cement shall Conform to IS 14182]. SN-8

a 160 mm diameter metre 244 0.00

b 200 mm diameter metre 122 0.00

22 Providing, Laying and jointing non-pressure (NP2) RCC socket & spigot pipes with rubber gasket joint including testing of joints. [Conforming to IS ; 458-1988, ISI marked laying as per IS 783:1985)

a 150mm dia RCC Pipe metre 10 0.00

b 200mm dia RCC Pipe metre 10 0.00

c 250mm dia RCC Pipe metre 35 0.00

d 300mm dia RCC Pipe metre 30 0.00

TOTAL AMOUNT 0.00