REPAIR TO JOINERY,PAINTING,ROOF TREATMENT ,FITTIING,CEILING , REPAIR TO DRAINS, SEWAGE LINE , HARDSTANDING,FENCING AND OTHER MISC MAINT WORKS IN AIRPORT AREA AT KALINA AND OTHER MAINT WORK IN AIRPORT AREA UNDER AFS STN MUMBAI UNDER GE AF THANE

Amount

Dismantling of brick work or stone/boulder built in lime mortar or cement mortar including all quins, arches pillars etc but excluding ashlar facing dressed stone work & precast concrete articles for portion ordered to be dismantled and removing debris outside MOD land, complete all as specified and as directed by Engr-in-charge.

M & L for Pre-cast cement block masonry with solid blocks,exc 10 cm in width and setting in mortar type B1,1:2:4 (using 20mm graded stone aggregate,) , complete all as specified and as directed by Engr-in-charge.

M&L for brick work with sub class ‘B’ bricks using old size bricks ,straight of curved on plan exc 6m mean radius built in in CM 1:6 , complete all as specified and as directed by Engr-in-charge.

Demolition of reinforced cement concrete in any position and in any description not otherwise specifically provided for , complete all as specified and as directed by Engr-in-charge.

M & L for Reinforced cement concrete (design mix) in M-30 (20mm graded stone aggregate) for chajjas or simillar wks , complete all as specified and as directed by Engr-in-charge.

M & L for Reinforced cement concrete (design mix) in M-30 (20mm graded stone aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span , complete all as specified and as directed by Engr-in-charge.

M & L for formwork with fair finished surface to side of soffits of floors, or roof beam, beam haunchings, girders, bressummers,lintels, cantilevers, shelves incl supports, overhang etc, also splays betweeen floor and beams etc , complete all as specified and as directed by Engr-in-charge.

M & L for Reinforced cement concrete (design mix) in M-30 (20mm graded stone aggregate) for Columns, pillars, piers,posts and struts , complete all as specified and as directed by Engr-in-charge.

M & L for formwork to sides of pillars, posts, columns, piers and stanchions in square, rectangular fair finished surface of concrete , complete all as specified and as directed by Engr-in-charge.

M & L for TMT bars 6 mm to 8 mm dia , cut to length bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips ,quality confirming to TMT bars ,complete all as specified and directed by Engr-in-Charge.

M & L for TMT bars 10 mm dia and over, cut to length bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips ,quality confirming to TMT bars ,complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete of any description in part portion and part thickness as in hanger floor or any position not otherwise specifically provided for,complete all as specified and directed by Engr-in-Charge.

Removing demolished materials/debris to a distance exc 13.50 KM and n exc 15 KM and depositing outside MD land ,complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate, in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed by Engr-in-charge.

M & L for cement concrete work in pavement / hard standing of flexural strength 40 kg/per sq cm in field 400 kg of cement per cum, thickness of concrete 25 cm or less , complete all as specified and directed by Engr-in-charge.

M & L for finishing surface fairly smooth without using extra cement , complete all as specified and directed by Engr-in-charge.

M & L for forming construction joints 30mm deep X 10mm wide filled with sealing compund , complete all as specified and directed by Engr-in-charge.

M&L for 75mm thick PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) laid in alternate bay as in path / flooring / hardstanding etc finishing the concrete surface even and fair ,complete all as specified and directed by Engr-in-charge

M&L for pre cast RCC 1:2:4 type B1 using 20 mm graded stone aggregates as in cover slab for Drain cover and similar works supported on walls and set in CM 1:4 incl demolition of old cover slab ,complete all as specified and directed by Engr-in-charge.

M & L in repairs of PU coating in patches , Surface preparation prior to application of polymer mortar or self levelling cementitious using air/water jet after the surface preparation of the entire area/surface, including removing PU coating, clearing of all the marine growth, algae, and other fareign materials like laitance, oil and grease, curing compounds or other surface contaminants which may prevent full and proper adhesion of the primer using mechanical tools like grinder fitted with buffing wheel or similar. All inclusive of hire rate of equipment, consumables and labour charges etc. ,complete all as specified and directed by Engr-in-charge

M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of M/s. Fosroc as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush application ,complete all as specified and directed by Engr-in-charge.

M & L for self levelling cementitious compound with average thickness 12mm (Nitoflor levelcrete of FOSROC Make as equivalent) after surface preparation/cleaning of existing concrete surface curing etc. complete as specified and as directed and as per manufactures instructions ,complete all as specified and directed by Engr-in-charge.

M & L for Providing and applying antiskid flooring system over sound and moisture free concrete / screed surface( Trafficguard UR-150 of FOSROC make as equipment) after proper surface preparation and surface cleaning, application of epoxy primer (Nitoprime-25 of FOSROC make or equivalent) at the rate of 0.2 to 0.3 lit/Sqm, immediately apply Traffic guard UR150 wear course - PU Coating @ 0.2 lit/Sqm etc. ,complete all as specified and directed by Engr-in-charge.

M&L for Cutting holes into or through brick wall built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 not exceeding 150 Sq.cm area, complete all as specified and directed by Engr-in-charge.

Taking down cement plaster of any description on brick walls etc including raking out joints, hacking for key, scrubbing down with water etc , complete all as specified and directed by Engr-in-charge.

M & L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick or concrete surfaces , complete all as specified and directed by Engr-in-charge.

M&L 3mm thick wall care putty on wall , complete all as specified and directed by Engr-in-charge.

M & L for preparation of new surfaces on walls and applying two coats of oil bound distemper over a coat of primer , complete all as specified and directed by Engr-in-charge.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound @ 3% by weight of cement including finished even and smooth without using extra cement complete all as specified. Note: Water proofing compound will be measured and paid seperately, complete all as specified and directed by Engr-in-charge.

Supply only integral water proofing compund , complete all as specified and directed by Engr-in-charge.

M & L for preparation of new surfaces on walls and applying two or more coats of 100 % Premium acrylic emulsion paint having VOC less than 50 mg/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surface , complete all as specified and directed by Engr-in-charge.

M&L for complete removal of existing treatment on wall including applying 3mm thick wall care putty and applying two coats of oil bound distemper over a coat of primer , complete all as specified and directed by Engr-in-charge.

M&L for preparing old plaster surfaces on walls and applying two or more coats of 100 % Premium acrylic emulsion paint having VOC less than 50 mg/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surface , complete all as specified and directed by Engr-in-charge.

M & L for cutting out bricks, forming toothing for and bondinng new into old work incl value of new materials entering old walls and jointing and pointing in cement mortar (1:4) , complete all as specified and directed by Engr-in-charge.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillet, complete all as specified and directed by Engr-in-charge.

S & F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing , complete all as specified and directed by Engr-in-charge.

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing , complete all as specified and directed by Engr-in-charge.

S&F,in repairs, Anodised aluminium snap grid frame work of size (605mmx605mm ) for false ceiling , complete all as specified and directed by Engr-in-charge.

S&F, in repairs ,Hangers 6mm dia. G.I. (upto 1200 mm length) for size of grid (605mm*605mm ) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I.Flat 40*3 mm size 60 mm long and expansion hold fastners 12.50mm dia. 40mm long , complete all as specified and directed by Engr-in-charge.

S & F PVC insulation pannels 10mm thick with EPS stuck to 1mm printed PVC sheet used in lieu of plain PVC sheet placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing , complete all as specified and directed by Engr-in-charge.

Dismantling plain or corrugated steel sheeting,any gauge,thickness, including Nainital or similar pattern roof covering is any position all as specified and removing them outside MOD Land , complete all as specified and directed by Engr-in-charge.

Dismentling Asbestos cement corrugated or semi corrugated sheet in roof covering , wall covering ,complete all as specified and directed by Engr-in-charge.

S & F 6mm thick Asbestos cement, corrugated or semi-corrugated sheets in roofs , walls fixed with L-type or J-type or crank hook bolts. etc ,complete all as specified and directed by Engr-in-charge.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.80mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws ,complete all as specified and directed by Engr-in-charge.

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.80mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, vally, gutter,fixed with self tapping screws ,complete all as specified and directed by Engr-in-charge.

S & F,in repairs, 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type or crank hook bolt in lieu of screw ,complete all as specified and directed by Engr-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for ,complete all as specified and directed by Engr-in-charge.

S&F mild steel Fe-410-W(Gde-E-250)quality-B, Joist, channel,angle,or tee sections, fixed independently,connecting plates, etc,(cut to ordinary lengths i.e.within 20mm of the length indicated), ornamental and intricate design ,complete all as specified and directed by Engr-in-charge.

S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, Fe 410-W (Gde-E-250) quality-B,etc , ornamental and instricate design ,complete all as specified and directed by Engr-in-charge.

S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 ,complete all as specified and directed by Engr-in-charge.

M & L for , cement concrete type B0 1:2:4 (using 12.50 mm graded stone aggregate) mixed with water proofing compound @ 3% by weight of cement as in roof kerbs or mud stops, rounded or camfered on edges ,complete all as specified and directed by Engr-in-charge.

M&L for preparartion of new surfaces of steel exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer ,complete all as specified and directed by Engr-in-charge.

M&L for preparartion of old surfaces of steel exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer ,complete all as specified and directed by Engr-in-charge.

M&L for preparartion of old eaves gutter and pipes surfaces of steel not exceeding 10 cm width or girth and when unconnected with other painting or when painted in different tint with and including applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

Taking down door Chowkhat/frame Exc 1.5 sqm but not exc 4 sqm each (without taking off shutters from the frames) ,complete all as specified and as directed by Engineer-in-charge.

Resecuring chowkhats or frams exc 1.50 sqm but n exc 4 sqm each without taking down from frame ,complete all as specified and as directed by Engineer-in-charge

S&F,in repair, powder coated (minimum thickness of powder coating 50 micron) aluminium frames including sliding tracks, etc for doors, windows, ventilators, partitions with one or more rebates including jointing cleats for fixing, fittings like hinges, handles,locks, and also standard closing and opening systems for louvers glass etc , complete all as specified and directed by Engr-in-charge.

S&F Rubber gasket for aluminium frame for windows, Ventilators etc , complete all as specified and directed by Engr-in-charge.

S & F ,in repairs ,stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.14 mm fixed with stainless steel wire staple , complete all as specified and directed by Engr-in-charge.

S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden lapping in square not exc 0.50 Sqm in each pane ,complete all as specified and directed by Engr-in-charge.

S & F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each pane including glazing for aluminum frame work , complete all as specified and directed by Engr-in-charge.

S & F 5mm thick figured glass pin head type in square having area exc 0.50 Sqm in each pane including glazing for aluminum frame work , complete all as specified and directed by Engr-in-charge.

S & F, in repair, door closer aluminium (*extruded section) body hydraulically regulated designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg , complete all as specified and directed by Engr-in-charge.

S & F, in repair, floor door stopper of aluminium alloy body 150 mm length, and tounge, anodised, with hard drawn steel spring , fixed in floor , complete all as specified and directed by Engr-in-charge.

S & F, in repair, Mortice lock with two levers (vertical type), brass body 100 mm length of latch , complete all as specified and directed by Engr-in-charge.

M&L for 9mm thick Pre laminated partical board , exterior grade, prelaminated both side with decorative choice laminations for Aluminium doors , Partations works including fixtures and fastners reuired for proper fixing , complete all as specified and directed by Engr-in-charge. etc.

S & F, in repairs, Double action floor spring Hydrauilically regulated made up of minimum 1.25 mm thick aluminium alloy sheeet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty , complete all as specified and directed by Engr-in-charge.

S&F, in repairs , brass mortice lock, vertical type, size 100 mm , 4 levers with 2 keys , complete all as specified and directed by Engr-in-charge.

Demolition of floor or wall tiles, stone slab of any description or thickness laid ,bedded and pointed in any morter all as specified and removing demolished materials and debris outside MOD land , complete all as specified and directed by Engr-in-charge.

M & L for Black Granite tiles 20 mm thick machine cut,bedded and jointed with grey cement slurry and ,pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including screed bed of 10mm thick in Cement mortar 1:6 ,grinding and polishing on floor ,complete all as specified and directed by Engr-in-charge.

M & L for Black Granite tiles 20 mm thick machine cut, in skirting/dado laid over screed bed of 10mm thick in Cement mortar 1:3 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete ,complete all as specified and directed by Engr-in-charge.

M&L machine cut cudappa stone slab 20-25mm thick over cement screed base as in jambs and soffits of lintel laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing over 10mm thick in CM 1:3 as backing coat to receive cudappa stone slab , complete all as specified and directed by Engr-in-charge.

M & L for rounding the edges of stone slabs one edge, such as in steps, cooking platform and other simillar situations ,complete all as specified and directed by Engr-in-charge.

M & L for Vitrified ceramic tiles double charge , dark shade 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 Sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick screed bed or bedding layer in CM 1:6 for receiving floor finished ,complete all as specified and directed by Engr-in-charge.

M & l for Vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 Sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick screed bed or bedding layer in CM 1:6 for receiving floor finished ,complete all as specified and directed by Engr-in-charge.

M & L for racking , cutting and waste on glazed tiles ,complete all as specified and directed by Engr-in-charge.

M &L for glazed ceramic tiles in vertical surface 350x250x7 mm / 450x350x7mm thick , coloured tiles set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick in CM 1:3 as backing coat to receive skirting / dado, complete all as specified and directed by Engr-in-charge.

M&L for chequered cement concrete tiles 200mm x 200mm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and no pigment to match over 10mm thick in CM 1:6 as backing coat to receive floors ,complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for including old tarfelt etc and removing debris outside MOD land ,complete all as specified and directed by Engr-in-charge.

M&L in repairs APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) laid on primed surface by torch application ,complete all as specified and directed by Engr-in-charge.

M&L for preparation of new or previosuly untreated surfaces of concrete over 10cm girth or width and applying 2 coats of bitumenous base aluminium paint over a coat of priming paints plastered coat ,complete all as specified and directed by Engr-in-charge.

M&L PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) in roof padding ,complete all as specified and directed by Engr-in-charge.

M & L for rendring 10 mm thick in CM(1:3) mixed with WPC on top of PCC padding when the surface is green finished even and smooth without using extra cement ,complete all as specified and directed by Engr-in-charge.

S & F, in repairs, 12 mm thick plywood incl necessary cutting and waste ,complete all as specified and directed by Engr-in-charge.

S & F, in repairs , 12 mm Partical board, medium density , flat pressed single line layer type or three layer type with BWR type adhesive fixed with screw to timber frame work in ceiling flat or sloping ,complete all as specified and directed by Engr-in-charge.

S&F, in repairs, 18mm to 19 mm thick prelaminated particle board interior grade, prelaminated both sides with decorative choice laminations fixed with screws to timber frame work,complete all as specified and directed by Engr-in-charge.

S&F Magnetic catches MS body for cupboard doors ,complete all as specified and directed by Engr-in-charge.

Extra over rates of block board or veneered particle board or pre laminated particle board for external teak wood lipping 6 mm thick fixed with nails complete all as specified and directed by Engr-in-charge.

M&L,in repair, Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, in 2nd class hardwood Exc 6 Sq cm & n Exc 13 Sq cm sectional area, , complete all as specified and directed by Engr-In- Charge

S&F,in repairs, stainless steel 'L' shape soft closing spring hinges for cabinets shutters complete all as specified and directed by Engr-in-Charge

S&F,in repairs, GI push and pull channel brand of size 20"(51 CM) length for modular cabinets ,complete all as specified and directed by Engr-in-Charge.

S&F,in repairs, Rim latch (125 mm size of latch) with two levers of brass body stone enamelled finish , with brass knob or lever handle and fixed ,complete all as specified and directed by Engr-in-Charge.

S&F,in repairs, aluminium anodised barrel towel bolts of extruded section of length 150 mm ,complete all as specified and directed by Engr-in-Charge.

S&F,in repairs,300 mm Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections ,complete all as specified and directed by Engr-in-Charge.

S & F stainless steel butt hinges medium weight SS of size 100 mm by welding to existing frame ,complete all as specified and directed by Engr-in-Charge.

S&F,in repairs, 300 mm size mild steel ordinary rat tail, rod pattern springs including roller and roller plate ,complete all as specified and directed by Engr-in-Charge.

S&F,in repairs,aluminium extruded alloy handles fabricated type anodised of size 150 mm,complete all as specified and directed by Engr-in-Charge.

S&F,in repairs,hasp and staple safety type of size 100 mm of aluminium anodized,complete all as specified and directed by Engr-in-Charge.

Re-securing or easing and adjusting without taking down shutters of any description and size ,complete all as specified and directed by Engr-in-Charge.

M & L for fixing 6 mm thick plywood fixed with screw incl necessary cutting and waste ,complete all as specified and directed by Engr-in-Charge.

S & F 20 mm dia aluminium anodised tubular curtains rod with powder coated including taking down old curtain rod ,complete all as specified and directed by Engr-in-Charge.

S & F, in repairs, aluminium anodised brackets powder coated to match with rod for curtain rod of 20mm ,complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass of any thickness, size, quality or description from metal /wooden frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones ,complete all as specified and directed by Engr-in-Charge.

S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden lapping in square not exc 0.50 Sqm each in each pane ,complete all as specified and directed by Engr-in-Charge.

Ditto as per Srl Item No 104.00 above but with 3 mm thick figured glass.

S & F 5.5 mm thick sheet glass ordinary quality area exc 0.50 Sqm in each pane and glazing for aluminum frame work ,complete all as specified and directed by Engr-in-Charge.

M & L for welding in repairs to roof truss,rafters , purlins,steel gates/ windows / doors exc 2.5 cm but not exc 5.00 cm in length and thickness of metal to be welded exc 9 mm but n exc 20 mm [height of roof truss,rafter / purlins 12m to 15 m] ,complete all as specified and directed by Engr-in-Charge.(Note : Contractor quoted rates should deemed to be included with Scaffholding for height factor)

S & F, in repairs ,40 mm dia cupboard knobs fixed with nut, screw and washer of mild steel bright ,complete all as specified and directed by Engr-in-Charge.

M&L for Cleaning of PVC tank of capacity exc 250 Litres but n exc 500 Litres including by flushing out water cleaning & removing of sludge, scale ,mud from tank and from mouths of circulating pipes etc from wall & floor by rubbing with brushes, cleaning with concentrated hydrochloric acid or caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 Metre and depositing ,complete all as specified and directed by Engr-in-Charge.

Ditto as per Srl Item No 111.00 above but capacity of tank exc 500 Litres but n exc 1000 Litres.

Ditto as per Srl Item No 111.00 above but capacity of tank exc 1000 Litres but n exc 2000 Litres.

S&F, in repairs ,500 Litrers capacity triple layered, rotational moulded, polyethylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position over existing PCC platform including all fittings such as connection pipe pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including fixing only ball valves,complete all as specified and directed by Engr-in-Charge.

S & F, in repairs ,float valve upto 25mm bore ,complete all as specified and directed by Engr-in-Charge.

S & F, in repairs ,bib tap for 15 mm bore dia of pipe ,cast copper alloy, chromioum plated fancy type screwed down, with capston head, screwed for iron pipe ,complete all as specified and directed by Engr-in-Charge.

S & F, in repairs, pillar taps for 15 mm bore dia of pipe, cast copper alloy chromium plated, fancy type, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe ,complete all as specified and directed by Engr-in-Charge.

S & F ,in repairs ,pillar taps for 15 mm bore dia of pipe swan neck , cast copper alloy chromium plated, fancy type, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe ,complete all as specified and directed by Engr-in-Charge.

S&F, in repairs ,brass chromium plated single hole basin mixer for 15 mm bore dia of pipe for mixing hot & cold water screwed down for iron pipe ,complete all as specified and directed by Engr-in-Charge.

S&F, in repairs, stop valve or angle valve for 15 mm dia pipe, cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union ,complete all as specified and directed by Engr-in-Charge.

S&F, in repairs, stop valve with long shank (consealed type) for 15 mm dia pipe cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union ,complete all as specified and directed by Engr-in-Charge.

S & F Gun metal, globe or gate valve for 20 mm dia pipe with iron wheel head screwed both ends for iron pipe and including taking down old gate valve ,complete all as specified and directed by Engr-in-Charge.

S&F, in repairs, brass spindle with nylone washer to existing 15 mm size chromium plated bib taps, Pillar taps, stop cock or angle valve of any type ,complete all as specified and directed by Engr-in-Charge.

S&F, in repairs, unserviceable existing bib taps, Pillar taps, stop cock or angle valve of any type & size incl replacement of nylon washer , teflon tape etc ,complete all as specified and directed by Engr-in-Charge.

S&F , in repairs, stop valve of PTMT any colour for 15 mm dia pipe ,high pressure screwed for iron pipe, weight not less than 90 gms,complete all as specified and directed by Engr-in-Charge.

S & F , in repairs, ball valves of 20 mm dia high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including taking down old ball valve [Minimum weight for 20 mm – 210 gms] ,complete all as specified and directed by Engr-in-Charge.

S&F, in repairs, grating doom 150 x 150 mm of brass chromium plated,,complete all as specified and directed by Engr-in-Charge.

S & F , in repairs, PVC connection 15 mm size with PTMT nuts on both end, length 450 mm,complete all as specified and directed by Engr-in-Charge.

S & F , in repairs, PVC connection 15 mm size with PTMT nuts on both end, length 600 mm, complete all as specified and directed by Engr-in-Charge.

S&F , in repairs,brass chromium plated shower rose 125 mm dia with or without / swivel joints, ncluding fixing to steel pipe or union, , complete all as specified and directed by Engr-in-Charge.

S&F ,in repairs, 10 Ltr capacity PVC syphonic action type flushing cistern low level with inlet ball valve, float and handle, fixed in position and connecting including t, complete all as specified and directed by Engr-in-Charge.

S & F ,in repairs, syphonic set for vitreous china low level flushing cistern of any capacity, complete all as specified and directed by Engr-in-Charge.

S&F, in repairs, the internal fitting kit complete suitable for 10 to 15 ltr PVC low level flushing cistern , complete all as specified and directed by Engr-in-Charge.

S&F, in repairs, vitreous china white wash hand basin 550 mm x 450 mm including all necessary fitting such as 15 mm CP pillar cock fancy type, CP waste coupling 32mm dia, PVC waste pipe and brackets including supply and grouting 6 to 8 mm dia GI racket bolt at the back side of WHB and making good existing surfaces, complete all as specified and directed by Engr-in-Charge.

S&F plastic water closet seat cover, white or black colour closed pattern with flat bottom including taking down old seat cover , complete all as specified and directed by Engr-in-Charge.

S&F ,in repair,polyethylene water tank cover with hinges suitable up to 2000 Ltrs tanks, complete all as specified and directed by Engr-in-Charge.

S&F ,in repairs, brass chromium plated zig zag type connector (coupling) of 15 mm size for connecting wall mixer and GI tubing , complete all as specified and directed by Engr-in-Charge.

S&F ,in repairs, wall mixer of 15 mm size, for mixing hot & cold water, cast copper alloy, chromium plated with capstan head comprising bib tap with all connected accessories, complete all as specified and directed by Engr-in-Charge.

S&F ,in repairs, mild steel galvanized water tubing 15 mm bore dia, medium grade with all fitting and accessories complete fixed to walls / ceiling or laid to floors including taking up or down old tubing and connected fitting , complete all as specified and directed by Engr-in-Charge.

Taking up or down 20 mm bore steel water tubing including connected fitting, fixture, and disconnection of fitting fixture etc. from tubing, complete all as specified and directed by Engr-in-Charge.(Note: Old serviceable steel tubing retrived from this item shall be used against relevent item of Sch A).

Re-fixing of old serviceable 20 mm bore galvanized iron tubing medium grade retrieved from relevent item of Sch A, after cleaning of tube and including all fittings and fixtures fixed to walls / ceiling or laid to floors complete.

S&F 20 mm bore mild steel galvanized water tubing, medium grade with all fitting and accessories complete fixed to walls / ceiling or laid to floors complete.

Supply and fix, in repairs, 32 mm size waste pipe, length 1.20m for wash hand basin / urinal / sink , complete all as specified and directed by Engr-in-Charge.

Supply and fix ,in repairs ,40 mm size waste pipe length 1.20m for wash hand basin / urinal / sink complete , complete all as specified and directed by Engr-in-Charge.

Supply and fix, in repairs ,32 mm size waste coupling of PTMT for wash hand basin / urinal / sink , complete all as specified and directed by Engr-in-Charge.

Supply and fix ,in repairs, 40 mm size waste coupling of PTMT for wash hand basin / urinal / sink , complete all as specified and directed by Engr-in-Charge.

Supply and fix, in repairs, Hand shower (Health Faucet) brass chromium plated with 8 mm Dia & 1 meter long flexible tube and wall hook , complete all as specified and directed by Engr-in-Charge.

S & F,in repairs ,6 mm thick corner glass self with aluminum / SS railing incl brackets for fixing ( size 300 mm x 300 mm )etc, complete all as specified and directed by Engr-in-Charge.

S & F, in repairs, 6 mm thick rectangular glass self with aluminum / SS railing incl brackets for fixing ( size 450mm x 150 mm ) etc, complete all as specified and directed by Engr-in-Charge.

S & F in repairs Teflon tape adhesive sealant length 10 m , width 1.5 cm , complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs 15 mm size wash hand basin mixer, for mixing hot & cold water, cast copper alloy, chromium plated with capstan head comprising single hole bib tap with all connected accessories, complete all as specified and directed by Engr-in-Charge.

S&F, in repairs, Vitreous china EWC wall mounted (white) with seat cover,low level flushing cistern incl flushing kit, brackets for fixing ,making good existing surface etc , complete all as specified and directed by Engr-in-Charge.

S & F ,in repairs,Stainless steel plate rack , Mimimum 1mm thick having size (900 x 760 x 230 mm ) including fixing on wall with brackets etc , complete all as specified and directed by Engr-in-Charge.

S & F ,in repairs, Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm dia pipe , complete all as specified and directed by Engr-in-Charge.

S & F, in repairs ,PVC Rainwater drainage pipes of 160 mm bore dia , waste, soil ,(SWR) PVC SWR pipes single socketed in any length with ubber ring joints fixed to wall.

S & F, in repairs ,PVC 110 mm bore Rainwater drainage pipes , waste, soil ,(SWR) PVC SWR pipes single socketed in any length with ubber ring joints fixed to wall.

S & F ,in repairs ,PVC (SWR) bends 160 mm bore any radius ,complete all as specified and directed by Engr-in-Charge.

S & F, in repairs, PVC (SWR) bends 110mm bore any radius , complete all as specified and directed by Engr-in-Charge.

S & F, in repairs, PVC 110mm bore (SWR) coupler , complete all as specified and directed by Engr-in-Charge.

S & F, in repairs ,15 mm dia high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cm , complete all as specified and directed by Engr-in-Charge.

S & F ,in repairs, 20 mm high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cm

S & F, in repairs ,tubular towel rail, aluminium anodised 20mm dia D type 60 CM long between flanges , complete all as specified and directed by Engr-in-Charge.

S & F, in repairs, Toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws , complete all as specified and directed by Engr-in-Charge.

M & L for preparation of old decorated surfaces of walls and applying one coat of cement base paint , complete all as specified and directed by Engr-in-Charge.

M & L for preparation of old decorated surfaces of ceiling etc and applying one coat of Oil bound distemper , complete all as specified and directed by Engr-in-Charge.

M & L for preparation of old decorated surfaces of wall and applying one coat of plastic emulsion paint , complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old decorated steel surfaces and applying one coat of synthetic enamel paint , complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old decorated Steel surfaces and applying one coat of synthetic enamel paint , complete all as specified and directed by Engr-in-Charge.

M&L for preparation of previously untreated surfaces of wall and applying two coats of oil bound distemper over a coat of primer , complete all as specified and directed by Engr-in-Charge.

M & L for Anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling holes at 45 degree and plugging 12 mm dia holes with cement mortor 1:2 (1 cement :2 coarse sand) to match the existing floors , complete all as specified and directed by Engr-in-Charge.

M&L for Anti termite treatment along the external wall below concrete or masonary apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron , complete all as specified and directed by Engr-in-Charge.

S K ENTERPRISES

kajal construction

R J ENTERPRISES