Construction of Trophy/Memento stand, Up-gradation of IG(GW) Office and Replacement of Cup Board at seminar hall and Ceiling at IG (Trg) office at Dte Gen, ITBP

Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes, shelves, racks, almirah, cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in-charge.

Providing & Fixing mica sheet of plain / wood grain in gloss / matt/ suede with adhesive bonding quality including cost of adhesive of approved quality. 1.00 mm thick

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.00 mm thick

Providing and fixing 10 mm thick frameless toughened glass in slab of approved brand and manufacture including providing and fixing of 40x40 mm long SS Support for shelves arrangement and making necessary holes etc. for fixing required fittings all complete. as per direction of Engineer-in-charge.

Providing and fixing door of 8 mm thick frameless toughened glass door shutter of approved brand and manufacture including providing and fixing SS Hinges and making necessary holes etc. for fixing required door fittings all complete. as per direction of Engineer-in-charge (Door hinges, door lock, and stopper etc. to be paid separately).

Providing and fixing 6mm thick glass mirror of approved brand and manufacture and making necessary holes etc. for fixing etc all complete. as per direction of Engineer-in-charge

Providing and fixing Antique Handles ISI marked to required colour or shade with necessary screws etc. complete : 150 mm

Providing and fixing Antique SS Hinges to required colour or shade with necessary screws etc. complete : 90 mm

Providing and fixing 50 mm long SS Door Lock in glass door with necessary screws etc. complete

Providing and fixing Door Latch/Catcher for glass door shutter with necessary screws etc. complete

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A

Supply, installation, testing and commissioning of Round Shape 8 watt, Aura Prime LED Downlighter, 220-240V, 50Hz, 38mA, PF>0.90, 3000K, of approved make and model as per direction of Engineer in charge.

Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed arrangement and screws etc. complete :12 mm thick

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With fully perforated 12 mm thick micro tegular edged GRG false ceiling tiles.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double Charge Vitrified tile Polished finishof size of Tile 600 x 600 mm.

SITC of 2 Ton 3 to 5 Star Inverter Split AC (5 in 1 Convertible, Copper, Anti-Viral + PM 2.5 Filter, White Colour, 1 Year warranty on the product and 10 Years warranty on the Compressor.

Providing and fixing in position wooden panel for wall lining with suitable frame work. Panel should be made of 18 mm thick commercial board and 18 mm & 12 mm thick ply wood in layers. 5.5 mm vineer on top layer of panel, as per approved design including lipping/ moulding of local wood size 40 mm x 18 mm and taj beading, upper surface penal, finished with approved veneer (excluding malemine polish of approved shade) as per the direction of engineer in charge. All internal wood work including inner surface of plywood shall be treated with anti termite wood preservative against borer pests white ents.

Melamine polishing on wood work (one or more coat).

Providing and laying of 8mm thick laminated wooden flooring with matte finish of approved make and as per directions of Engineer in charge.

Providing and fixing 18mm thick Maximum Density High Moisture Resistance Board, conforming and marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately)

Providing and fixing in position wooden panel for cup board shutter. Shutter should be made of 18mm thick Maximum Density High Moisture Resistance Board and 11 mm thick in layers. 5.5 mm thick vineer on front side side of shutter, as per approved design including lipping/ moulding of local wood size 40 mm x 18 mm and taj beading, upper surface penal, finished with approved veneer (excluding malemine polish of approved shade) as per the direction of engineer in charge.

Providing and fixing bright finished brass Handle to required colour or shade with necessary screws etc. complete : 100 mm

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 75x65x4 mm (heavy type)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 5/6 A switch

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board, 510x1140 mm bowl depth 250 mm

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked black enamelled M.S butt hinges with necessary screws excluding, panelling which will be paid for separately. (Thickness of shutters should be 35mm): first class local available wood conferming IS- 399:1963 (Weight of should be 545 Kg/ M3): 35 mm thick shutterrs

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panel

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper

Providing and fixing Steel Door Lock with handle ISI of required colour or shade with necessary screws etc. complete

Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over 0.50 mm thick GI channels (as per requirement) with rabbit wire mesh fixed to GI frame : Flat surfaces