West Bengal Sdc

Active

Works

CIVIL AND ELECTRICAL WORKS

Supply and Installation of Electronic Signage Board with structure frame and ACP surface under SWM Project under SWM project at Kaliyaganj Municipality Uttar Dinajpur

MUNICIPAL AFFAIRS DEPARTMENT

Kaliyaganj | Dinajpur Uttar, West Bengal

Amount: ₹1.2 LCloses: 3 Nov 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published8 Oct 2026
Closes3 Nov 2026
Bid Opening5 Nov 2026

Tender Value

₹1.2 L

EMD Value

₹2,450

Closing Date

3 Nov 2026, 5:30 pm

Tender Inviting Organisation

Name

Executive Engineer.Dinajpur division,Raiganj

Address

Executive Engineer.Dinajpur division,Raiganj,Mohonbati, N.S Road,Pin-733134

Work Description

Supply and Installation of Electronic Signage Board with structure frame and ACP surface under SWM Project under SWM project at Kaliyaganj Municipality Uttar Dinajpur

Tender Information

Tender ID

2026_MAD_5078567_1

Reference Number

01/EE/DJP/MED/2026-27(2nd call)

Tender Type

Open Tender

Product Category

CIVIL AND ELECTRICAL WORKS

Form of Contract

Percentage

Location

Kaliyaganj

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

5 documents required · 5 mandatory

Fee/PreQual/Technical

RequiredNIeT (.pdf)

RequiredEMD (.pdf)

RequiredTender Documents (.pdf)

Finance

RequiredBOQ (.xls)

RequiredDrawing (.pdf)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹2,450

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

8 Oct 2026

Published

8 Oct 2026

Bid Opening

5 Nov 2026

Download Starts

9 Oct 2026

Download Ends

3 Nov 2026

Submission Starts

9 Oct 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (5 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supply of Acrylic letter scripted in English/Bengali size and matter of letter as per approved drawing by E.IC,front side of the letter to be made 6 mm thick imported(white-0.40) uv stabilizes excellent to self-display, Make Acast, Mitsubishi, all letter will be raised minimum 2" to be fixed by special type of solution.
1.1	Making procedure- The Signage Board made out of leaser cut 4 mm.acrylie letter fixed behind the ACP panel and 3 mm laser cut acrylic letter/logo insert and fixed in the CNC-cut positions, perfectly aligned and finished flush with the ACP surface, Green colour vinyl pested on 3 mm acrylic maintaining uniform Level and neat appearance.The signage shall be illuminated internally using outdoor quality LED modules of GOQ make or equivalent approved brand, complete with suitable driver/power supply of outdoor grade. All internat wiring shall be properly dressed, insulated and secured to ensure safety and long service life.The complète signage shall be installed at site in proper alignment, level and plumb, including all necessary fittings, fasteners, supports and accessories.The work shall include allmaterials, fabrications finished in a professional manner with smooth edges, clean joints and high-quality workinanship as per approved design, specifications and client's satisfaction. The signage structure made out of MS section of size 96 X 48 mm. and 25 X50mm duly welded with proper joints and adequate stiffeners to ensure required strength, rigidity and long-term durability. MS section painted with apoxy base primer. The MS box structure shall be wrapped /Cladded with ACP sheet, CNC router eut as per approved design and drawings. [ Size 24.5 ft X3.6 ft)=8.191 Sqmt . As per our Structural Gate	8.19	sqmt	11,488	₹94,086.72
2M.S Structure for back support- fabricating and fixing of signage back support structure made out of Mild steel angle section of 40mmx 40mm x 4mm complete in all respect.the structure shall be properly cut,aligned and welded with accurate joints and provided with necessary stiffeners/bracing to ensure adequate strength,rigidity and long term stability. The MS section painted with apoxy base with final painting after cleaning of rust and dust etc. for corrosion protection.
2.1	The structure shall be fixed on concreate surface using 10 mm dia Fisher (or approved equivalent) fasteners including drilling and anchoring,The signage board shall be connected to the structure using 8 mm thick M.S plate properly aligned and rigidly fixed by bolts/welding as required.(The rate shall be including all materials,Labour charges,transportation,installation etc and finishing complete as per condition and to the satisfaction of the E.I.C(Size-24.5 ftX3.6 ft = 7.467 X 1.097 mts.) As per our structural gate designe= 48.69 kg.	48.69	kg	74.57	₹3,630.81
2.2	Transportation,Testing & Commissioning,Transportation of complete signage from workshop to project site with including proper packing,loading and unloading,safe handling and to the installation location. Installation materials such as MS brackets, anchor fasteners,clamps,nuts,bolts including necessary welding work with proper finishing and anti-rust touch-up. Providing and completing all required connection including wiring (within 6 mts),drivers,power supply unit, earthing and proper cable management. Testing and commissioning of the signage inclu. checking illumination,aligment,structure stability and electrical safety,complete in all respect as per site condition and under the instruction of E.I.C	1	no	5,058	₹5,058
3	Add 18% GST	1	no	18,499.6	₹18,499.6
4	Add 1% Cess	1	No	1,212.75	₹1,212.75

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.43 MB

Work Item Documents

BOQ_5179048.xls

BOQ • 0.30 MB

DRAWING.pdf

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supply of Acrylic letter scripted in English/Bengali size and matter of letter as per approved drawing by E.IC,front side of the letter to be made 6 mm thick imported(white-0.40) uv stabilizes excellent to self-display, Make Acast, Mitsubishi, all letter will be raised minimum 2" to be fixed by special type of solution.
1.1	Making procedure- The Signage Board made out of leaser cut 4 mm.acrylie letter fixed behind the ACP panel and 3 mm laser cut acrylic letter/logo insert and fixed in the CNC-cut positions, perfectly aligned and finished flush with the ACP surface, Green colour vinyl pested on 3 mm acrylic maintaining uniform Level and neat appearance.The signage shall be illuminated internally using outdoor quality LED modules of GOQ make or equivalent approved brand, complete with suitable driver/power supply of outdoor grade. All internat wiring shall be properly dressed, insulated and secured to ensure safety and long service life.The complète signage shall be installed at site in proper alignment, level and plumb, including all necessary fittings, fasteners, supports and accessories.The work shall include allmaterials, fabrications finished in a professional manner with smooth edges, clean joints and high-quality workinanship as per approved design, specifications and client's satisfaction. The signage structure made out of MS section of size 96 X 48 mm. and 25 X50mm duly welded with proper joints and adequate stiffeners to ensure required strength, rigidity and long-term durability. MS section painted with apoxy base primer. The MS box structure shall be wrapped /Cladded with ACP sheet, CNC router eut as per approved design and drawings. [ Size 24.5 ft X3.6 ft)=8.191 Sqmt . As per our Structural Gate	8.19	sqmt	11,488	₹94,086.72
2M.S Structure for back support- fabricating and fixing of signage back support structure made out of Mild steel angle section of 40mmx 40mm x 4mm complete in all respect.the structure shall be properly cut,aligned and welded with accurate joints and provided with necessary stiffeners/bracing to ensure adequate strength,rigidity and long term stability. The MS section painted with apoxy base with final painting after cleaning of rust and dust etc. for corrosion protection.
2.1	The structure shall be fixed on concreate surface using 10 mm dia Fisher (or approved equivalent) fasteners including drilling and anchoring,The signage board shall be connected to the structure using 8 mm thick M.S plate properly aligned and rigidly fixed by bolts/welding as required.(The rate shall be including all materials,Labour charges,transportation,installation etc and finishing complete as per condition and to the satisfaction of the E.I.C(Size-24.5 ftX3.6 ft = 7.467 X 1.097 mts.) As per our structural gate designe= 48.69 kg.	48.69	kg	74.57	₹3,630.81
2.2	Transportation,Testing & Commissioning,Transportation of complete signage from workshop to project site with including proper packing,loading and unloading,safe handling and to the installation location. Installation materials such as MS brackets, anchor fasteners,clamps,nuts,bolts including necessary welding work with proper finishing and anti-rust touch-up. Providing and completing all required connection including wiring (within 6 mts),drivers,power supply unit, earthing and proper cable management. Testing and commissioning of the signage inclu. checking illumination,aligment,structure stability and electrical safety,complete in all respect as per site condition and under the instruction of E.I.C	1	no	5,058	₹5,058
3	Add 18% GST	1	no	18,499.6	₹18,499.6
4	Add 1% Cess	1	No	1,212.75	₹1,212.75

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Supply of Acrylic letter scripted in English/Bengali size and matter of letter as per approved drawing by E.IC,front side of the letter to be made 6 mm thick imported(white-0.40) uv stabilizes excellent to self-display, Make Acast, Mitsubishi, all letter will be raised minimum 2" to be fixed by special type of solution.

1.1

Making procedure- The Signage Board made out of leaser cut 4 mm.acrylie letter fixed behind the ACP panel and 3 mm laser cut acrylic letter/logo insert and fixed in the CNC-cut positions, perfectly aligned and finished flush with the ACP surface, Green colour vinyl pested on 3 mm acrylic maintaining uniform Level and neat appearance.The signage shall be illuminated internally using outdoor quality LED modules of GOQ make or equivalent approved brand, complete with suitable driver/power supply of outdoor grade. All internat wiring shall be properly dressed, insulated and secured to ensure safety and long service life.The complète signage shall be installed at site in proper alignment, level and plumb, including all necessary fittings, fasteners, supports and accessories.The work shall include allmaterials, fabrications finished in a professional manner with smooth edges, clean joints and high-quality workinanship as per approved design, specifications and client's satisfaction. The signage structure made out of MS section of size 96 X 48 mm. and 25 X50mm duly welded with proper joints and adequate stiffeners to ensure required strength, rigidity and long-term durability. MS section painted with apoxy base primer. The MS box structure shall be wrapped /Cladded with ACP sheet, CNC router eut as per approved design and drawings. [ Size 24.5 ft X3.6 ft)=8.191 Sqmt . As per our Structural Gate

8.19

sqmt

11,488

₹94,086.72

2M.S Structure for back support- fabricating and fixing of signage back support structure made out of Mild steel angle section of 40mmx 40mm x 4mm complete in all respect.the structure shall be properly cut,aligned and welded with accurate joints and provided with necessary stiffeners/bracing to ensure adequate strength,rigidity and long term stability. The MS section painted with apoxy base with final painting after cleaning of rust and dust etc. for corrosion protection.

2.1

The structure shall be fixed on concreate surface using 10 mm dia Fisher (or approved equivalent) fasteners including drilling and anchoring,The signage board shall be connected to the structure using 8 mm thick M.S plate properly aligned and rigidly fixed by bolts/welding as required.(The rate shall be including all materials,Labour charges,transportation,installation etc and finishing complete as per condition and to the satisfaction of the E.I.C(Size-24.5 ftX3.6 ft = 7.467 X 1.097 mts.) As per our structural gate designe= 48.69 kg.

48.69

74.57

₹3,630.81

2.2

Transportation,Testing & Commissioning,Transportation of complete signage from workshop to project site with including proper packing,loading and unloading,safe handling and to the installation location. Installation materials such as MS brackets, anchor fasteners,clamps,nuts,bolts including necessary welding work with proper finishing and anti-rust touch-up. Providing and completing all required connection including wiring (within 6 mts),drivers,power supply unit, earthing and proper cable management. Testing and commissioning of the signage inclu. checking illumination,aligment,structure stability and electrical safety,complete in all respect as per site condition and under the instruction of E.I.C

5,058

₹5,058

Add 18% GST

18,499.6

₹18,499.6

Add 1% Cess

1,212.75

₹1,212.75