Providing fencing to the open to sky bathing place existing room convert to visitor hall and ramp arrangements for differently abled persons for Sub Jail at Hosur in Krishnagiri District.

Amount

E0001) Earth work excavation for foundation in all soils (including refilling) a) 0 to 2 mt.

RE0006) Providing Pre-Constructional Antitermite treatment

F0040) Supplying and filling in foundation and basement with filling crushed stone sand

F0013) Supply and filling in foundation and basement with gravel

CSMP0002) Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and basement using 40 mm gauge hard broken stone jelly

CSMP0003) Plain cement concrete 1:2:4 (One of cement two of crushed stone sand and four of Hard Broken Stone jelly) (including Mortar Plasticizer (Liquid) at 200ml per bag) using 20mm gauge hard broken stone jelly

C0065) Providing and laying in position, Standardised Concrete Mix M-20 Grade in a accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for the all RCC items of works (Using Crushed stone sand) a) In Foundation and Basement

b) In Ground Floor

BMP0006) Brick work in Cement Mortar 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) in foundation and basement including dewatering wherever necessary proper setting, curing etc., complete with relevant standard specifications.

BMP0007) Brick work in Cement Mortar 1:6 (One of cement and six of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) for super structure in the following floors including labour for fixing the doors, windows and ventilator frames in position, fixing of hold fasts, scaffoldings, curing etc., complete in all respect complying with relevant standard specifications and drawings. b) In Ground Floor

BMP0008) Brick partition wall in Cement Mortar 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 110mm thick for super structure in the following floors using Kiln burnt country bricks of size 8¾”x4¼x2¾” (22x11x7cm) including labour for fixing the doors, windows and ventilator frames in position, fixing of hold fasts, scaffoldings, curing etc., complete in all respect complying with relevant standard specifications and drawings b) In Ground Floor

FLMP0001) Flooring with a bed of CC 1:5:10 (one of cement, five of crushed stone sand and ten of hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag) using 40mm size hard broken stone jelly

FLMP0002) Plastering the top of flooring in CM 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FL0025) Weathering Course with concrete broken brick jelly 20mm gauge

FLMP0004) Finishing top of roof with one course of Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in CM 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag,) 12mm thick mixed with Water proofing compound at 2%

FLMP0005) Supplying and fixing of Colour glazed tiles (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:2 (One of cement and two of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

FLMP0006) Supplying and fixing of colour Ceramic Tiles Anti skid without corrugated design for flooring and other similar works (Best approved quality, colour and shade shall be got approved from the Executive Engineer before using) over cement mortor 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FLMP0009) Supplying and fixing of Stain free Nano polish Vitrified Tiles of size (600x600x8mm) for flooring and other similar works in cement mortar 1:3 (one of cement and three of crushed stone sand, including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FLMP0011) Supply and laying superior variety Concrete Designer tiles for flooring in CM 1:3 (One of Cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FW0004) Providing Form work and centering for reinforced cement concrete works a) For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc.,

b) Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works

c) For Square and rectangular columns and small quantities such as sunshade, parapet cum drops window boxiing, fin projection and other similar works.

PLMP0001) Plastering with CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick

PLMP0003) Special ceiling plastering in cement mortar 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

PA0001) White washing three coats using clean shell lime slaked

PA0018) Painting primer coat using approved quality of white cement over the cement plastered / concrete wall surfaces,ceiling or other similar works

PA0019) Painting the walls with two coats using approved quality of best Oil Bound Distemper over the one coat of water based cement primer

PA0022) Painting the new wood work with two coats of approved first class synthetic enamel ready mixed paint in addition to one coat of Primer

PA0026) Painting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats

PA0042) Painting the New walls with two coats of approved best ready mixed exterior emulsion paint outer walls in addition to one coat of approved primer coat

JD0073) Providing and fixing factory made unplasticized polyvinyl chloride (UPVC) Door Frame with shutter

JD0064) Supplying and fixing PVC sliding door with roller using 19 Gauge 19mm MS square tubes for styles and outer frames, 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter including slidng arrangements.etc., all complete and as directed by the departmental officers.

GR0001) Supplying and fixing Mild Steel grills as per the design approved

RE0004) Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry)

WS0002) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark conforming to IS 13952:1992- type `A` for Rain water down fall pipe

WS0033) Supplying and fixing of half turn C.P Long body Tap of 15mm dia

WS0276) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness not less than the specified in IS 4985 suitable for plumbing by threading of wall thickness including the cost of suitable UPVC specials / GM specials like Elbow, Tee reducers, Plug , unions, bend, coupler, nipple/ GM gate valve, check and wheel valve etc., wherever required above the ground level including the cost of teflon tap etc., Fully concealed in walls to the proper gradient and Alignment and redoing the Chipped portion of Masonry etc.,all complete and as directed by the departmental officers. a) 20mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

SA0002) Supplying and fixing of porcelin wash hand basin (white without pedastal), superior variety of size 550x400mm with all accessories

SAMP0003) Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety) having minimum of water seal of 50mm confirm to relevant I.S. specifications with its latest amendments including resting on the bed of brick jelly concrete 1:5:10 (One of cement, five of crushed stone sand and ten of 40 mm gauge brick jelly) including Mortar Plasticizer (Liquid) at 200ml per bag etc., complete

SA0025) Supplying and fixing EWC superior variety (white) 500mm with 'P' or 'S' trap (Using crushed stone sand) (including Mortar Plasticizer (Liquid) at 200ml per bag)

SA0033) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

SA0035) Supplying, laying and concealing the 50mm dia PVC (SWR) pipe with ISI mark confirmed to IS 13952-1992 Type-B for waste water line

MS0009) Supplying and fixing of Bevelled Edge Mirror of approved quality and brand of size 600x450x5.5mm shelf type

EL0002) Wiring with 1.5 sqmm PVC insulated single core multistrand fire retardant flexible copper cable with ISI mark confirming to IS 694/1990 1.1 K.V. grade cable a) Light point with ceiling rose

b) Light point with bakelite battern type holder

EL0010) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Fan Point

EL0026) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 K.V. grade cable for 5 Amps 5 Pin plug Socket Point @ Switch Board Itself

EL0034) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable for 5 Amps 5 pin Plug Socket Point at Convenient Places

EL0074) Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook

EL0075) Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator

EL0078) Supply and delivery of following Electric Ceiling fan with ISI mark with blades and double ball bearing, capacitor,etc., complete a) 48"" Electric fan 1200mm sweep

EL0085) Supplying and fixing of 225mm dia sweep AC exhaust fan of approved ISI quality

EL0070) Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite pattern holder of best approved variety and as directed by the departmental officers. (The materials should be got approved from the Executive Engineer before use) a. 9 watts LED bulb

EL0047) Supplying and fixing of 4'18 watts crystal LED tube light and fixing the tube light fittings

EL0100) Supplying and fixing of 25 watts LED bulb with Street light fittings arrangements

DI0092) Dismantling clearing away and carefully stacking materials useful for reuse of brick masonry in cement mortar walls without affecting the adjacent structures, including the cost of required tools and plants and scaffolding if necessary and clearing the dismantled materials away from the site etc., all complete and as directed by the departmental officers.

DI0051) Dismantling the damaged floor finish and dadooing walls in cement mortar with Mosaic tiles/Glazed tiles/Cuddapah slabs without affecting the adjacent structures including the cost of required tools and plants and clearing the debris 2km away from the site etc., all complete and as directed by the departmental officers.

GR0018.a) Supplying and fixing of weld mesh of size 7.5 X 2.5cm of approved quality the rates includes cost of all materials and labour charges etc complete and as directed by the departmental officers.

GR0057) manufacturing, supplying and fixing of stainless steel hand rails for staircase near wet riser using 50mm dia 304l grade stainless steel pipe of 1.60mm thick will be provided with tubular supports made of 304l grade stainless steel pipe of 25mm dia of 1.60mm thick welded to the railing. the supports will be grouted into the wall and provided with 93.00mm thick stainless steel circular base plate of 304 grade. the rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical

EL0190) Run of main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0191) Run of main with 2 wires of 4 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0561) Supply and fixing of Single pole 6 Amps, 10 KA MCB including cost of all materials, labour charges and erection charges etc., all complete as per relevant standard specification and as directed by the departmental officers.

GR0011) Supplying and fixing M.S. Grill door as per the drawing enclosed using 25x50x6mm channel, 16mm dia and 20mm dia M.S. rod, stiffeners madeup of 25x6mm and 30x6mm M.S. flat, holdrop with M.S. plate with necessary locking arrangements, M.S. grill window and ventilators as per the drawing enclosed using 25x50x6mm channels, 16mm dia M.S. rod and stiffeners madeup of 25x6mm M.S. flat and entrance gate as per the drawing enclosed using 50x10mm M.S.I section 20mm dia M.S. bar, 30x8mm and 30x6mm M.S. flats, 8mm thick G.I. sheet on both sides with an openable door, locking arrangements, tower bolt with aldrop including welding charges, conveyance labour making fixing in position , one coat of primer etc., complete in all respects complying with relevant standard specifications and as directed by the departmental officers. ( the Design & Quality should be got approved by the Executive Engineer before use] a) 1000 x 2100mm

EL0298) Supply and fixing of 32 Amps Electro mechanically operated three phase Earth Leakage Circuit Breaker/Residual Current Circuit Breaker (ELCB/RCCB) Three phase

EL0301.I) Supplying and fixing of HORIZONTAL THREE PHASE DISTRIBUTION BOARD WITH MCBS 4 way TPMCB sheet steel distribution boards flush type / surface type fitted with bus bars and neutral links with single / three phase MCB outgoings and separate 4 way provision for accommodating One No. 4 pole incoming MCB / Isolator and another separate 4 way provision for accommodating One No. 4 pole ELCB / RCD with label holder and provisions for taking up cable for size not less than 35 sq.mm. TPMCB DB with Metal Door Cover with IP 42 Protection HIGHER END 4 ways 3 phase DB No. of ways incomer MCB / Isolator - 4 No. of ways incomer ELCB / RCD - 4 No. of outgoings ways - 12

WS0107) Supplying and fixing of 32mm dia PVC Tee with end cap

SA0139) Supplying and fixing of best approved quality of following CP water supply/Sanitary fittings confirming to I.S. specification including cost and labour charges for fixing etc., complete complying with relevant standard specifications and as directed by the departmental officers (The brand and quality of the materials should be got approved from the Executive Engineer before use) b) CP two way bip cock with health faucet