Convertion of LT Over head to LT UG Cable at ward No51 Manjunath Nagar near Ganapathi temple Hubli Division

Convertion of LT Over head to LT UG Cable at ward No51 Manjunath Nagar near Ganapathi temple Hubli Division

4.2.7) 9 m - Top 70 mm and Bottom 155 mm dia Minimast Octagonal PoleFabricating, supplying and erection of . ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S

355 JO steel plat...

13.4.1) Single bracket 1.5 m. Length MS Bracket Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and a...

Earth Work th work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, cautio...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Supplying ,fitting and placing TMT Fe 550 Reinforcement in foundation complete as per drawing and technical specifications (.PWD SR 2021-22 Vol No.03 P.No.71 SI No. 9.3 1st quarter revised rate ) 12mm...

4.2.4) 6 m - Top 70 mm and Bottom 130 mm dia Octagonal Pole: Fabricating, supplying and erection of …Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft,...

2.3.1 )1.0 sqmm Wire:

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wi...

2.3.4) 4 mm2 Wire:

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wirin...

5.7.2) 32Amps Fuses Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.

5.13.1 ) 25 A Contactor Switch Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rati...

5.47) Electronic Timer

Supplying and fixing Microprocessor based Electronic timer

(without contactor, Din Mounting using necessary bolts, nuts

and washers etc. 3-120sec setting.

5.17.1 6-32 A SP MCB Switch Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 wi...

5.17.7 6-32 A TPN MCB Switch Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

5.44.1) 300 mm x 300 mm x 214 mm Minimast Panel Box Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent

Polycarbonate Lid, shock proof, ...

Using 25mm diameter G.I.Pipe Bend Supplying and Fixing of.mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket 1x40/2x40 W fluorescent tube street light fitt...

Labour Charges Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. 31.05 ) 2.5 to 25 Sq mm

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards a...

Digging of Pit for providing GI Pipe type Earthing 1.6.1 Ordinary Soil

214 32.04) 16 Sqmm, 2 Core, (9 GI Strips - 4 x 0.8 mm) Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVCextruded Inner sheath armoured UG LTcable as per IS-1554 (Part-1) or IS-...

32.14 95 Sqmm, 3.5 Core, (21 GI Strips - 4 x 0.8 mm) Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVCextruded Inner sheath armoured UG LTcable as per IS-1554 (Part-1) or IS-70...

PVC Pipe 48.03) PVC Pipe - mm Dia

Pot Head Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1KV. 35.01) Up ...

Pipe type earthing for each street light box 54.01) GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long,3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg

54.02) Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each

54.03) Good Quality Salt for grounding purposes packed in 50 Kg gunny bag

1.01) RCC Pole - 9 Mtr Long, 145 Kg WL

(Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785

Spiral Earth Electrode .

7.02 Rabbit ACSR (6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM

6.06 No. 8 Strain Insulator

6.03 1.1 kV Ceramic Pin Insulator (Shell onl

2.08) LT 2 Pin Cross Arms - GI

2.02) Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth

Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Meter Long Steel RCC PSCC supports as per approved Drawing.1.1.1 Ordinary Soil .

Fixing of 2 Pin cross arm with Insulator and Braces fixing

Stringing of conductor Rabbit A C S R binding of conductor on each insulator and dead ending on strain or disc strain insulator by means of clamps

Digging of Pit for GUY SET 1.7.1 Ordinary Soil

Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)

30.06 35 to 95 Sqmm (3.5/4 Core) Labour Charges Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. .

29.11 Cement Concrete Road

Earth work excavation for Cutting of Road surface for cable trenches and disposing of the excavated earth, as directed including Barricading, Danger Lighting then Refilling...

1 34.09) 95 Sqmm, 3.5/4 Core Straight Through Jointing Kit Suitable for

1.1 kV Class LTUG Cable as per IS-13573

Aluminium End Terminal (Lug)

30.01) 8 Way LT Feeder Piller Box LT Feeder Piller Box with Poreclain Rewireable Cutout and & 1 No of 630 Amps Load Break Switch with Copper Busbar as per IS-13947 Part-1&2

8.02) upto 8 Ways Erection of LT Feeder piller box including necessary civil works like soil excavation & concreting etc. complete

PVC Pipe 48.10 PVC Pipe - 150 mm Dia .

8.01 7/10 SWG Guy Wire

(7/3.251 mm Dia), Std Wt: 680 Kg/KM

5.10 Guy Clamp - GI .

5.12 Anchor Rod using 12 mm rounds/Guy Rod - MS (Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018) .