Drilling of Borewells in Ward no 19 Near Gouse A Ajam madarasa back side of RO Plant and Jamiya Choutri Fixing of pump motor in ward no 19 RO Plant back side And jamiya Choutri.

Drilling of Borewells in Ward no 19 Near Gouse A Ajam madarasa back side of RO Plant and Jamiya Choutri Fixing of pump motor in ward no 19 RO Plant back side And jamiya Choutri.

Geophysical investigation of site for sinking borewell for suuplying drinking water to habitation either through the hand pump, MWS or PWSS By vertical electrical sounding by adopting veener/ schlum...

Sinking borewell of 165 mm dia clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF & above in all strata including over burden up to 20 M. fixing of casing pipes, collars, and c...

Sinking borewell of 165 mm dia clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF & above in all strata including over burden up to 20 M. fixing of casing pipes, collars, and c...

Sinking borewell of 165 mm dia clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF & above in all strata including over burden up to 20 M. fixing of casing pipes, collars, and c...

Sinking borewell of 165 mm dia clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF & above in all strata including over burden up to 20 M. fixing of casing pipes, collars, and c...

Sinking borewell of 165 mm dia clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF & above in all strata including over burden up to 20 M. fixing of casing pipes, collars, and c...

Sinking borewell of 165 mm dia clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF & above in all strata including over burden up to 20 M. fixing of casing pipes, collars, and c...

Supply of ISI mark 175 MM nominal bore, plain end Steel casing pipe grade of steel fe 410, of wall thickness 2.5 mm thick confirming to ISI 4270:2001 and lates amendments electric resistance welded st...

Providing and laying at site of work MS casing caps as per IS 1239 (part II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...

Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per ne...

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog...

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty colla...

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments.1x3x4 m...

Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-II, 1991 with latest amendments if any for:50mm

Providing and fixing GI union in existing GI pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same co...

The Non Return Valve (NRV) assembly complete with rubber ‘O’ ring.

Providing Supplying and fixing suitable for 1.1 KV class UG cable filled with necessary bitumen insulating compound complete with terminals, clamps,bolts,nuts and washers etc. with necessary materials...