REPAIR REPLACEMENT OF LT PANELS SWITCH GEARS CONNECTED ITEMS AT DMRL AND ATC DEVATALAGUTTA UNDER GE (I) RND KANCHANBAGH, HYDERABAD

Supply , install test & commission of LT Panel in door type, Cubicle type, as per IS/IEC-61439- for 415 V ,50Hz,rated fault current : 75KA with internal arc containment dust, vermin proof, weather proof, IP-54 Grade of protection, fabricated on 50x50x5 mm thick MS angle iron frame both side opening and locking arrangement including providing aluminium bus bar of capacity 1000 Amps rating including internal wiring using suitable size not less than 1.5 sqmm FRLS copper conductor cable along with ferrules. The panel shall be painted with anticorrosive coating and finally epoxy polyester powder coating of siemens grey shade (RAL -7032). the panel should be mounted on 'C' channel base of required size duly coated with anti corrosive paint. the circuit distribution lines to be marked over the panel using poly venyl reflective stickering (Where necessary) complete all as specified and directed by Engr-in-Charge. Incoming MCCB 630 Amp 36 KA - 01 Nos (Incoming)cos Outgoing MCCB 4 Pole 200 Amps 36 KA-02 Nos MCCB 4 Pole 100 Amps 36 KA-02 Nos MCCB 4 Pole 63 Amps 27 KA-04 Nos MCB 4 Pole 32 Amps 27 KA-04 Nos

Supply , install test & commission of LT Panel in door type, Cubicle type, as per IS/IEC-61439- for 415 V ,50Hz,rated fault current : 75KA with internal arc containment dust, vermin proof, weather proof, IP-54 Grade of protection, fabricated on 50x50x5 mm thick MS angle iron frame both side opening and locking arrangement including providing aluminium bus bar of capacity 1000 Amps rating including internal wiring using suitable size not less than 1.5 sqmm FRLS copper conductor cable along with ferrules. The panel shall be painted with anticorrosive coating and finally epoxy polyester powder coating of siemens grey shade (RAL -7032). the panel should be mounted on 'C' channel base of required size duly coated with anti corrosive paint. the circuit distribution lines to be marked over the panel using poly venyl reflective stickering (Where necessary) complete all as specified and directed by Engr-in-Charge (PEG WORKS SECTION) Incoming MCCB 4 Pole 630 Amps 36 KA -01 No's Outgoing MCCB 4 Pole 400 Amps 36 KA-02 Nos MCCB 4 Pole 200 Amps 36 KA-02 Nos MCCB 4 Pole 100 Amps 36 KA-03 Nos MCB 4 Pole 63 Amps 36 KA-03 Nos

Supply , install test & commission of LT Panel in door type, Cubicle type, as per IS/IEC-61439- for 415 V ,50Hz,rated fault current : 75KA with internal arc containment dust, vermin proof, weather proof, IP-54 Grade of protection, fabricated on 50x50x5 mm thick MS angle iron frame both side opening and locking arrangement including providing aluminium bus bar of capacity 600 Amps rating including internal wiring using suitable size not less than 1.5 sqmm FRLS copper conductor cable along with ferrules. The panel shall be painted with anticorrosive coating and finally epoxy polyester powder coating of siemens grey shade (RAL -7032). the panel should be mounted on 'C' channel base of required size duly coated with anti corrosive paint. the circuit distribution lines to be marked over the panel using poly venyl reflective stickering (Where necessary) complete all as specified and directed by Engr-in-Charge (MRS) Incoming MCCB 4 Pole 630 Amps 36 KA-01 Nos Outgoing MCCB 4 Pole 200 Amps 36 KA-02 Nos MCCB 4 Pole 100 Amps 36 KA-02 Nos MCCB 4 Pole 63 Amps 36 KA-02 Nos MCB 4 Pole 32 Amps 36 KA-03 Nos

M & L for Earthing with G I earth plate 600 mm X 600 mm X 6 mm thick including accessories, an providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

S&F Laying LT UG cable heavy duty armoured with aluminum conductor multistranded PVC insulated and sheathed with suitable lugs including taking out old unserviceable cable complete all as directed for following sizes: - 2 core 10 Sqmm

4core 16 Sqmm

3.5 core 25 Sqmm.

3.5 core 35 Sqmm.

3.5 core 50 Sqmm.

3.5 core 95 Sqmm.