8259 REPAIR AND MAINT OF OTM/MD ACCN OF INF BN I AND BN II AT MIL STN SHAHJAHANPUR UNDER GE (E) BAREILLY.

Amount

Taking down cement plaster including racking out joints hacking for key and scrubbing down with water etc. complete all as specified and as directed.

M&L rendering 15mm thick in cement plaster 1:6 on surfaces other than fair faces of brick work and surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L rendering 10mm thick in cement plaster 1:4 on concrete surfaces of ceilling and finished the surface even and smooth without using extra cement all as specified

M&L for two coats of cement base paint including preparation of new surface of wall complete all as specified and as directed.

M&L for two coats of cement base paint including preparation of old decorated surface of wall complete all as specified and as directed.

M&L for two coat of oil bound distemper including preparation of new surface of wall complete all as specified and as directed.

M&L for two coat of oil bound distemper including preparation of old treated surface of wall complete all as specified and as directed.

M&L for 1mm thick (JK/Birla) wall putty on wall all as specified and directed

M&L three coat of white wash on wall including preparation of new plastered surface and complete all as specified

M&L three coat of white wash on ceilling including preparation of new plastered surface and complete all as specified

M&L preparing old plastered or unplastered surfaces of wall and applying one coat of white wash on old decorated surface of wall complete all as specfied and direcetd.

M&L preparing old plastered or unplastered surfaces of ceiling and applying one coat of white wash on old decorated surface of ceiling complete all as specfied and direcetd.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed.

S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisiting of frame made out of MS tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20 mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed as specified and as directed.

S&F 100 mm long butt hinges, extruded alminium alloy with galavanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and as directed.

S&F 150 mm aluminium handles cast type, anodised complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n. exc 4 sqm each complete all as specified and directed.

Taking down shutter of any description n exc 1 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed.

S&F powder coated alluminium alloy anodised door frame fixed with side hung shutters and glazing fixed with and including 4.80 mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed :- (a) Frame 80x44x1.98mm thick with rawl plug (b) Middle and lock rail : 150x44x1.98mm thick (c) Bottom rail : 150x44x1.98mm thick (d) Top rail/sype : 85x44x1.98mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, 100 mm long steel butt hinge, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortice lock 100mm 4 leaver, aluminium stopper, hydraulically regulated door closer (Make Sandhu ISI marked or ites equivalent approved make) (g) Making good of wall surface to match with existing surface complete.

S&F aluminium anodised sliding windows, shutter glazing with and including 4.8 mm thick tinted glass fixed with rubber gasket with aluminium beading, clips, frame, with duco pattern grill of size 75 mm X 75 mm and steel mosquito wire netting fixed with beading made with aluminium section suitable for three track slids, making good of wall surfaces to match with existing surfaces complete all as specified and directed.

S&F powder coated aluminium anodised windows, ventiletators frame with side/top hung shutters and glazing with and including 3.8 mm thick tinted glass fixed with rubber gasket with aluminium beading, clips, frame made with aluminium section as appended below:- (i) Frame :65X40X1.98 mm thick (ii) Top/bottom rail and style /rail of shutter : 44X47X1.98 mm thick (iii) Aluminium beading - 0.7 mm thick (iv) Aluminium fitting such as peg stay,aluminium hinges, aluminium handle 100 mm long, aluminium tower bolt 100mm long (v) Making good of wall surfaces to match with existing surfaces complete all as specified and directed

S & F Mild steel work as in chowkats/frame of door or gates of angle or other section with gusset plate, rail braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and inclu either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guisides) and hanging also fastening and fixing complete

S&F pressed steel frames of size 125x60 for doors with one or more rebates including necessary fixing lugs,hinges,lock,strike plate,etc. complete as specified,with toothing bonding of brickwork which was disturbed during taking down of chaowkhat included in this item including brickwork plaster nothing extra will be paid.

S&F pressed steel frames of size 165x60 for doors with one or more rebates including necessary fixing lugs,hinges,lock,strike plate,etc. complete as specified,with toothing bonding of brickwork which was disturbed during taking down of chaowkhat included in this item including brickwork plaster nothing extra will be paid down

S&F factory made single extruded WPC (wood polymer composite) solid door / window / ceosetory windows and other frames / chowkhat of size 65x125mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk) and non toxic additives(max toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum screw withdrawl strength of 2200 N (Face) and 1100 N (Edge) min compressive strength of 58 N/sqmm modulus of elsticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast / lugs/ SS dash fasteners of required dia and length complete all as specified and directed. (Note:- M.S hold fast/lugs or SS dash fasteners shall be paid for separately)

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F Factory made single extruded WPC (wood polymer composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (suspension grade) calcium carbonate and natural fibres(wood powder/rice husk)and non toxic additives(max toxicity index of 12 for 100 gms)having min density of 650 kg/cum and screw withdrawl strength of 1800 N (Face) and 900 N (Edge) min compressive strength of 50N/mm2 modulus of elsticity 850N/sqmm and resistance to spread of flame of class A category with property of being termite/borer proof water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws all as per dir of Eng-in charge

S & F 300 mm long mild steel sliding door bolts, ISI marked clip & bolt type, stove enamelled black, with bright bolt not less than 16mm dia with and including minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

S&F 2nd class hard wood glazed and skeleton shutters 35mm thick open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats complete all as specified and as directed.

S&F in repairs 18 mm thick boarding with BWP plywood with nails as in cub board shelves in any situation planed one side with butt joints complete all as specified and as direcetd.

S&F 25mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sisides.

S&F haps and staple 150mm long safety type aluminium anodised with mild steel hing pin including bolt to hing plate and fixed with screws

S&F 75 mm butt hinges medium weight cold rolled mild steel and fixed

S&F 100 mm butt hinges medium weight cold rolled mild steel and fixed

S&F 150 mm long mild steel pressed handles oval type stove enamlled black complete all as specified and as directed.

S&F 200 mm long mild Barrel tower bolt, oval type stove enamlled black with bright bolt and fixed

M & L preparing wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down steel/wooden window of any size and description complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel ventilator with top hang shutter including hinges steel pag stay, complete all as specified and directed.

S&F in reparis mild steel framed work as such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways, m s railings framework of water tanks and similar work conforming to Fe 410-0 or FE 310-0 all as specified and directed.

S&F 3 mm thick sheet glass, Ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

All as per Srl Item No. 47 here in before but 4.8mm thick frosted sheet glass.

S& F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed.

M&L applying 2 coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation over 10 cm width and girth complete all as specified and as directed.

Supply and fix in repairs galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed .

Hacking out old broken glass of (any thickness, size, quality or description) from old wooden/steel frame, or stones, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed.

M&L PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) for filling in bed block of hold fast etc complete all as specified and direcetd.

Demolition of cement concrete (un reinforced) of any description and in any position not other specifically provided for complete all as specified and direcetd.

M&L for cement concrete (1:5:10) type E-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and direcetd.

M&L for preparation of sunken floor and applying a coat of hot bituminous primer @ 0.30 kg/sqm and applying a coat of industrial bitumen 85/25 @ 1.20 kg/sqm over primer and laying modified polymeric water proofing membrane(weight not less than 3 kg/sqm 2 mm thick consisting 100 mm micron HMHDE FILM ) and applying one coat of industrial btumen grade 85/25 @ 1.2 kg/sqm on top of membrane with 100 mm overlap at side end lap where required over 10 mm thick rendering in CM 1:4 including integral waterproofing compound 3% and taking down existing plastering as per manufacturer instruction and complete all as specified and directed

Removing existing water proofing treatment and preparing surfaces to the entire satisfaction of Engineer-in-Charge including taking down existing plaster, cleaning of all foreign material such as grass, roots, dust etc and roughening the concrete surfaces by wire brushing and washing down to remove dust etc. flushing at junction of parapets complete and removing the same to the places where directed.

M&L for 10 mm thick rendering in CM 1:4 including integral water proofing compound 3% and taking down existing plastering as per manufacturer instruction and complete all as specified and directed

M&L for preparation of roof surfaces, applying a coat of primer@ 0.40Kgs/sqm applying a coat of bitumen grade 85/25 @1.2kg/sqm supplying and laying water proofing treatment with using polymeric water proofing membrane (weight not less then 3kg/Sqm) consisting of 100 micron HMHDPE film centre core including applying a coat of bitumen 85/25 grade @ 1.2kg per sqm on top surface of membrane and torch application of membrane with 10cm overlap where required and finally finished with and including a coat of aluminium paint @0.20Ltr/Sqm as per manufacture instruction complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 22 mm thick rubber moulded chequered cement concrete coloured tiles area of each tile exc 0.06 sqm but n.exc 0.12 Sqm , set & jointed in neat cement slurry and pointed with cement & pigment to match the shase of tiles in floors over and incl 20 mm thick screed bed in CM 1:6 complete all as specified and as directed.

S&F in repair vitreous china squatting pan "Orissa" pattern size 580mm x 440mm white with integral foot rests excluding flushing cictern and flush pipe complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed.

Supply only plastic water closet seat cover black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and as directed.

S&F in repair CP Health Faucet with 1 Meter Flexible tube & Hook complete all as specified an directed.

S&F in repair toilet paper holder box type coloured of vitreous china fixed to wall with chromium plated (CP) brass screw complete as specified and directed

S&F in repairs 15mm dia two way angle valve, cast copper alloy, chromium plated screwed down, high pressure with crutch or butterfly handle complete all as specified and directed.

S&F in repair Jet spray chromium plated with 1mtr heavy PVC hose butterfly type, with chromium plated nuts complete all as specified and directed.

S&F in repair PVC bathroom cabinet standard quality and size 432x311mm complete all as specified and directed. Make commander/sintex/Prayag

S & F in repair 10 ltrs capasity PVC valveless syphonic action type flushing cistern low level white, with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and as directed.

S&F in repairs Vitreous China bowl urinal flat back, size of 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)

S&F in repairs 75 mm dia PVC (SWR) floor trap plain with greting incl jointing with solvent cement complete all as specified and as directed.

S&F in repairs 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S&F in repairs 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints fixed to wall all as specified

S&F 75 mm bore. PVC (SWR) bends complete all as specified and as directed.

S&F in repairs 110mm bore PVC (SWR) junction single (single T) equal or unequal with access door complete all as specified and as directed.

S&F in repairs 110 mm dia PVC (SWR) vent cowl complete all as specified and as directed.

S&F in repairs 110 mm PVC (SWR) bend any radius complete all as specified and as directed.

S&F in reparis110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F in reparis 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches all specified and directed

S&F GI tube 15 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 15 mm dia & connections complete all as specified and directed.

S&F GI tube 20 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 20 mm dia & connections complete all as specified and directed.

Taking down existing GI Tubing 15 mm dia & connections including cleaning and refixing serviceable GI tube 15mm dia with new fittings and fixed to wall, ceiling or laid in floor all as specified and directed

Taking down existing GI Tubing 20 mm dia & connections including cleaning and refixing serviceable GI tube 20mm dia with new fittings and fixed to wall, ceiling or laid in floor all as specified and directed

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plug, washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and directed.

S&F in repair bib taps 15mm bore standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. (minimum wt. 90gms).

S&F in repairs Bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down, screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed.

S&F in repairs angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down, screwed both end for iron pipe or or brass ferrule for 15 mm bpre of pipe complete all as specified and as directed.

S&F in repairs Stop cock (Concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down, screwed both end for iron pipe or or brass ferrule with long shank and cup for 15 mm bpre of pipe complete all as specified and as directed.

S&F in repair swivel shower rose of PTMT any colour for fixing with 15mm pipe fixed complete all as specified and directed. (Minimum wt 40 Gms)

S&F in repair swivel shower rose of brass Chromium plated for fixing with 15mm pipe fixed complete all as specified and directed.

S&F rotational moulded polethylene water tank of 500 ltrs capacity, ISI Marked, white coloured (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system) hoisted and fixed in position all as pacific SSR Part- I including dismantling of existing water tanks capacity n exc 500 ltr complete all as specified and directed.

S&F rotational moulded polethylene water tank of 1000 ltrs capacity, ISI Marked, white coloured (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system) hoisted and fixed in position all as pacific SSR Part- I including dismantling of existing water tanks capacity n exc 1000 ltr complete all as specified and directed.

S&F in repair 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high denty plastic ball screwed for iron pipe and fixed (min wt. 210gms) complete all as specified and as directed.

S&F 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high denty plastic ball screwed for iron pipe and fixed (min wt. 210gms) complete all as specified and as directed.

S&F 20 mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair vitreous china wash basin white, flat, back, size 550x400 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe all as specified

S&F in repairs 15mm bore pillar tap cast copper allloy with capstan head Chromium plated scwed down with or without letter Hot or Cold with long shank and fly nuts scrwed for iron pipe and fixed as specified and directed.

S&F in repairs brass CP basin mixer for mixing hot & cold water screwed down for iron pipe and fixed of 15mm dia pipe complete all as specified and directed.

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, overall length of cover plate 150mm complete all as specified and directed.

Welding in repairs exc 2.5 cm but n exc 5 cm in length , thickness of metal to be welded n exc 6mm complete all as specified and directed.

Supply only 32mm dia wast fittings brass chromium plated for basin with long screwed shank and fly nuts, flange end bedded in red lead cement and other end fixed.

S&F in repair PVC connection 15mm bore length not less than 300 mm long with both ends PTMT nuts complete all as specified.

S&F in repair 15mm bore angle stop valve of PTMT any colour high prssure screwed for iron pipe and fixed all as specified (minimum wt. 90gms).

S & F in repairs 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repair CP towel rail 20mm dia, 600 mm long between flanges complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor for pavings n.exc 15cm thickness (below are above ground level) complete all as specified and directed.

M&L 40mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate laid in panel finished even and smooth with using extra cement as in flooring complete all as specified and directed.

Supply only glass dividing strip 3mm thick and 38mm wide in flooring complete all as specified and direcetd.

M&L 75 mm thick PCC 1:3:6 type C2 using( 40mm graded stone aggregate) as in plinth protection/foot path finishing cement concrete even and smooth with out using extra cement complete all as specified and as directed.

Demolition of stone slab and tiles of any description or thickness in floor, aprons etc. complete all as specified and directed.

M&L for machine cut mirror polished kota stone slab flooring 20-25mm thich over 15mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shad of the slab including round nosing at corners rubbing and polishing complete all as specified and directed.

M&L for machine cut mirror polish kota stone slab 20-25mm thich in riser of step, skirting, dado and pillers over and including 15mm thick rendering in CM 1:4 including rubbing and polishing complete all as specified and directed.

M&L for granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing types over 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for 20 mm thick granite (of any type) tiles machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over including 15mm thick rendering in CM 1:4 complete all as specified and directed.

Demolition of brick work in cement mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L brick work with sub class B bricks burnt straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with sub class ‘B’ old size bricks straight or curved on plan to any radius as in half brick thick wall built in CM 1:4 complete all as specified and directed.

Providing & fixing in repairs false ceiling at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanized iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.

S&F in repair fancy type curtain rod MS conduit rod PVC coated including fancy nob and ms bracket for hangging curtain rod complete all as specified and directed

S&F in repair 600mmx450mm bevelled edges mirror consisting of 5.5mm thick commercial plywood and fixed to plug with chromium plated brass screwed and cup washer complete all as specified and directed.

S&F in repair Aluminium Mortice lock 4 lever, size 75mm complete all as specified and directed.

S&F in repair door closer aluminium (Die cast) body hydraulically regulated, designation No 3, universal type, suitable foor door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&F in repair door closer aluminium (Die cast) body hydraulically regulated, designation No 2, universal type, suitable foor door shutter of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed

S&F in repair double action floor spring hydraulically regualted made up of minimmum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed

S&F partition wall of anodised aluminium hollow section members of size 63.50 mmX38mmX3mm thick with distance of vertical hollow section 1.0 m to 1.2 m and 1.0 mtr height wall having top rails,bottom rails and middle rail of size 63.50mmX38mmX3mm and upto middle rail wall panels shall be covered by 12 mm thick pre laminated particle board, interior grade both side with decorative choice laminations fixed into the wall with aluminium clip and bolt from middle rail to top rail panels shall be covered with 5.5 mm thick tinted glass fixed with aluminium strips/beadings with rubber gasket, sketch plan of wall as per existing or as provided by the Engineer-in-Charge complete all as specified and directed including dismantling old partion wall complete all as specified and directed.

M&L for Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes,etc of capacity exc 500 & n exc 1000 litres

M&L for Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes,etc of capacity exc 250 & n exc 500 litres

M&L for Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes,etc of capacity exc 1000 & n exc 2000 litres

S&F in repairs brass chromium plated wall mixer 3 in 1, 15mm for mixing hot & cold water screwed down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws to steel frame work, as specified.

S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/clading to wall, fixed with self tapping screws as specified.

M&L 6mm thick Asbestos Cement, one piece plain angular ridge in roof fixed with L Type or J type or crancked hook bolt etc. complete all as specified and as directed.

M&L 6mm thick Asbestos Cement, Corrugated or Semi corrugated sheets in roof, wall fixed with L Type or J type or crancked hook bolt etc. complete all as specified and as directed.

Supply and fix in repair PVC wall panneling with any type of joint 8 mm thick in double layer with bracing in between thickness of top layer min 0.5 mm thick complete all as specified and as directed.

M&L for second class hard-wood in scantings clean sawn with timber framed and fixed

M & L glass shelf for corner in arc 300 mm 5 mm thick glass including steel brackets and front railing min 25 mm height with steel pipe complete all as specified and as directed.

M&L for Anti termite treatment at points of contact of wood work by chemical emulsion(in oil or kerosene based solution)@ 0.5 litre/hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and as directed.

Refixing of door in repair and fixing in same opening by resecuring or easing & adjusting without/with taking down complete all as specified and as directed.

S&F Aluminium wardrobe hooks(triple) 50mm to 60mm complete all as specified and as directed.

S&F in repair 15 mm dia fancy type stop cock , chromium plated with long shank and cup (concealed type) for iron pipe or for unions and fixed complete all as specified and directed.

Taking down aluminium door / windows of any size and description and repair/replacement of parts such as beading, rubber gasket, floor spring, mortice lock etc and refixing in the same opening complete all as specified and directed.

M/S Ishwar Builder

M/S WASEEM KHAN CONTRACTOR

munish chandra

M/S MANSI TRADERS

m/s udit constructions

M/S CHAUHAN ELECTRIC WORKS

M/S SHAHABUDDIN AND SONS