SPECIAL REPAIR TO OR MD ACCN BLDG BLOCK NO P-670 AND 668/1 TO 668/4 IN PEERU SINGH ENCLAVE AT OLD AMRITSAR CANTT UNDER GE AMRITSAR

Amount

Taking down chowkats or frames with shutter (without taking off shutters from chowkats / frame) not exc 1.50 Sqm each including cutting of holes for hold fast complete all as specified.

All as per Srl Item No 01.00 here-in-before but exc 1.50 Sqm and not exc 4.00 Sqm each.

Demolition of cement concrete, in ground floor and paving, not exc 15 cm thick (below or above ground level), disposal of debris and rubish, unserviceable materials etc to a distance not exc 100m complete all as specified and directed.

Demolition of cement concrete, above ground level in any situation including sunken floor, disposal of debris and rubish, unserviceable materials etc to a distance not exc 100m complete all as specified and directed.

Demolition of brick work built in cement mortar, seperation, cleaning and stacking of serviceable bricks for reuse and removal of debris, rubbish to a distance exc 400 m but not exc 500m complete all as specified.

M&L for brick work with sub Class 'B' old size bricks, straight or curved on plan exceeding 6 Metre mean radius, built in cement mortar 1:4 complete all as specified.

All as per Srl Item No 06.00 here-in-before, but except bricks. Note:- Serviceable bricks obtained from dismantling of brick work shall be reused.

Taking down cement plaster from wall's/ceiling including raking out joints hacking for key scrubbing down with water complete all as specified.

M&L for 15mm thick cement plaster in CM 1:6 on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc complete all as specified.

M&L for 15mm thick cement plaster in CM 1:4 on fair faces of brick work and finishing the surface even and smooth (without using extra cement) etc complete all as specified.

M&L for 10 mm thick cement plaster in CM (1:3) on concrete surfaces of ceiling and finishing the surface even and smooth (without using extra cement) etc complete all as specified.

M&L for 15 mm thick cement plaster in CM (1:3) on sunken portions with WPC by weight of cement as and finishing the surface even and smooth (without using extra cement) etc complete all as specified.

Supply only integral water proofing compound.

S&F 40mm bore steel water tubing grade galvanised inserted at the end of lateral slope projecting atleast 25cm beyond the outermost part of the building below the pipe up to two storey construction as spouts for sunken and all joints should be sealed properly by epoxy sealent complete all as specified all as directed.

Dismantling brick tiles or terracing tile, single/double layer on roof including mud phuska any thickness and leepng plaster, seggregating, cleaning and stacking servicable tiles for reuse complete all as specified and directed.

M&L cement concrete 1:2:4, type B-0, 50 mm thick, using 12.50mm graded stone aggregate with WPC by weight of cement as in roof padding, finishing even & fair complete all as specified.

M&L cement concrete 1:2:4, type B1, 25 mm thick, using 20mm graded stone aggregate in sub bass under floor finishes complete all as specified.

M&L polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non-wove fabric (weight not less than 150 gm/sqm), laid on primed surface by forced application laid after preparation of surfaces by cleaning thoroughly to achieve a smooth surface, including application of a coat of bitumen primer @ 0.30 ltr per Sqm over a coat of hot blown bitumen of grade 85/25 @ 1.2 Kg per Sqm, overlaps of polymer shall be minimum 10 cm width/length wise complete all as specified and directed.

M&L for cement concrete 1:5:10, type D-2, using 40mm graded stone aggregate, as in lean concrete, foundation filling, mass concrete including sunken floor complete all as specified.

M&L for 40mm thick brick tiles, laid on and including 15 mm thick cement mortar 1:6 and joints grouted and pointed flush in CM 1:3 mixed with 5% crude oil by weight of cement complete all as specified and directed.

All as per Srl Item No. 20.00 here-in-before but except brick tiles. Note:- Old serviceable tiles shall be reused.

Supplying and fixing PVC sheet 5mm thick, in backside of kitchen cabinets complete all as specified and diirected.

S&F PVC board 18mm thick as in cupboard shelves for kitchen cabinets etc all as specified.

S&F 18mm thick PVC Shutter one side prelaminated of any shade for kitchen cabinates etc all as specified and as directed.

S&F 40mm long shelf closing type hydraulic hinges complete all as specified and as directed.

M&L factory made, 35 mm thick flush shutter, soild core construction with block board & plywood face panels, commercial type on both sides, ISI marked complete all as specified.

M&L 35mm thick second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges for receiving glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a) complete all as specified.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification & drawing given in Section 8 of SSR Part –II 2010.

Supply and fixing plain, framed, panelled shutters 35mm thick (any numbers of panels) of 2nd class hard wood (Hollock), with panels of timber flat on both sides ( feather edged), or of veneered particle board medium density, wood particle board with commerical face veneers complete all as specified

M&L box type steel window, ERW hollow P-Section size 60 mm x 25 mm, double rebated ERW section of 1.25mm thick, comprising of glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one or two No openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast and guard bars etc as given below all as shown on drg No CEJZ/TD-06/07 incuding cutting holes and PCC 1:2:4, type B-1 in hold fast block, complete all as specified and directed as follows:- (a) Hold fast 150mm long of MS flat 12mm x 3mm - 4 Nos per Window (b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf (c) MS tower bolt 150mm long - 02 Nos per leaf (d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf (e) Cleat 55mm long of hollow square 15mm, 0.63mm thick- 01 Nos per leaf (f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf (g) MS guard bar 10mm square bars @ 10cm c/c fixed horizontly Note:- Sheet glass, wire mesh and painting shall be measured and paid sperately.

Material and labour for cup board shutter, frame made of angle iron 35x35x6mm, covered with 1.00mm thick MS sheet, welded to frame including suitable handle, lugs and locking arrangement complete all as specified and directed.

S&F steel Ventilator with top hung shutters including steel pegs complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or GI wire staples or wooden beads complete all as specified.

S&F 3mm thick ordinary sheet glass and glazing with oil putty or fixed with wooden beading, in squares not exc 0.50 Sqm in each panes complete all as specified.

M&L mild steel framed works, as in door frame, gates of angle or other section with gusset plates, rails, braces etc, drilled for fixing of steel sheeting including drilling or fixing welding be prepared for hanging or sliding with and either hooks and hinges fixing, framed work as in grill, guard bars etc withends of bars riveted or forged into spikes, framed guard bars and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified.

Material and labour for Mild steel work as in grill ,guard bars & tubular trusses and screwing etc. including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, nolting or riveting, etc. and similar work conforming to Fe-410-0 & Fe-310-0.complete all as specified.

S&F 125mm size extruded aluminium anodized handle cast type complete all as specified.

S&F 125mm size extruded aluminium anodized handle fabricated type complete all as specified.

S&F 75 to 80mm size stainless steel pressed handle complete all as specified.

S&F 150 mm size aluminium anodized barrel tower bolt of extruded section complete all as specified.

S&F 300mm size, aluminium alloy anodised sliding door bolt, with sliding bolt not less than 12mm dia including minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified.

S&F 300mm mild steel ordinary rat tail rod pattern spring including roller plate including fixing with nailsd/ bolts or welded compete all as specified.

M&L for preparation of newly plastered surfaces on walls and applying two coats of oil bound distemper over wall putty to achieve smooth surface complete all as specified.

M&L for preparation of old decorated surfaces of walls. and applying two coats of oil bound distemper ove wall putty to achieve smooth surface complete all as specified.

M&L for preparation of new plastered surfaces and applying two coats of white wash on ceiling complete all as specified.

M&L for preparation of old decorated surface of ceilings and applying two coat of white wash complete all as specified.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified.

M&L for preparation of old decorated surfaces of walls and applying two coat of cement base paint complete all as specified.

M&L for preparation of new steel surfaces of any description, over 10 centimetre width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for preparation of new wooden surface over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning serviceable pipe for refixing and removal of unserviceable pipe, bore of pipe 15mm complete all as specified. Note :- The quoted rates shall be include for necessary excavation and earth work, cutting/ chasing in wall / floor and making good in CM1:3 all as directed.

All as per Srl item No 51.00 here-in-before but bore of pipe 20mm.

S&F galvanized iron steel tubing medium grade 15mm bore with all fittings and fixed complete all as specified to walls, ceiling or laid in floor complete all as specified.

All as per Srl Item No53.00 here-in-before, but except tubes. Note:- Serviceable tubes obtained from dismantling of old shall be reused.

S&F galvanized iron steel tubing medium grade 20 mm bore with all fittings and fixed complete all as specified to walls, ceiling or laid in floor Complete all as specified.

All as per Srl Item No 55.00 here-in-before, but except tubes. Note:- Serviceable tubes obtained from dismantling of old shall be reused.

S&F, in replacement, bib tap 15mm bore, standard chromium plated any colour high pressure screwed for iron pipe,complete all as specified.

S&F in repair for 15mm bore Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed complete all as specified.

S&F in repair for 15mm bore Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated and fixed complete all as specified.

S&F, in replacement PVC connections 450mm long of 15mm size with PTMT nuts on both sides complete all as specified.

S&F in replacement 125mm shower rose with Shower arm 15mm size,195mm long with bend of 45 degree with flange CP any colour complete all as specified and directed.

S&F, in replacement,25mm dia MS pipe PVC sheathed, decorative fancy type, curtain rod including brackets ABS Finials complete all as specified.

S&F in repair stainless steel kitchen plate rack size 750 x 750 x 300mm deep made out of 1mm thick sheet including fitting arrangement complete all as specified and directed.

S&F sink with drainage board made of stainless steel 1mm thick with plugs, washers and waste pipe complete including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, over all minimum size 915mm x460mm, bowel size 410mm x 330mm x160mm complete all as specified.

Dismantling floor hearth or wall tiles, stone slab including cement mortar bedding, in any position removing debris and rubbish off the premises complete all as specified and directed.

M&L ceramic tiles, 7 to 8mm thick, coloured non skid, (square / rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floor, set and jointed in neat cement slurry and pointed in white/colour cement to match with the colour of tiles over and including 15mm thick bedding layer in cement mortar 1:6 complete all as specified.

All as per Srl item No 66 here in before but skirting dado of tiles including 10mm thick plaster in CM 1:4

All as per Srl Item No 66.00 here-in-before but area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm & in CM 1:6.

M&L glazed ceramic coloured tiles of size 450 x 350 x 7 mm thick, on vertical surfaces of walls such as dado, skirting etc, set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles over and including 10 mm thick bedding layer of cement mortar 1:4 complete all as specified.

M&L chequered,precoated, cement concrete tiles with grey cement and no pigment, size 20cm x20cmx25mm thick over and including 20mm thick cement screed in CM 1:6, set, jointed and pointed in neat cement slurry over and including 75mm thick PCC 1:4:8, type D-2 complete all as specified.

M&L for udaipur green marble 16-18mm thick, any type, table rubbed and polished, in cooking platform and like, set in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of stone over and including 15mm thick cement screed bed in CM 1:4 including taking down existing stone slab, tiles etc complete all as specified.

S&F in repair vitreous china squatting pan (Orissa Pattern), size 580 x 440 mm (white), with PVC (SWR) P or S trap, integral foot rest including connection to trap and flushing pipe, flushing cistern and bedding in and including PCC 1:7:12, type F-2 and taking down / dismantling old unserviceable WC complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, flat back, size 550mm x 400mm including mild steel brackets, pillar tap 15mm size, chromium plated, CP waste coupling, PVC heavy duty waste pipe 32mm dia, including cutting for and pinning in ends of bracket complete all as specified.

S&F rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), ISI marked, hoisted & fixed in position (with 20mm dia PTMT ball valve), capacity 1000 litres including dismantling of old unservicable water tank complete all as specified and directed.

Dismantling cast iron pipes 75/100mm dia , jointed in cement mortar and taking out of trenches, if required complete all as specified.

S&F in replacement CI floor trap with grating 75 mm bore including jointing to waste pipe, fixed in and including PCC 1:2:4, type B1 alround complete all as specified.

S&F PVC (SWR) pipes single socketed, dia of pipe 110mm, in any length with rubber ring joints, fixed to wall with MS stack clamps of adequate size complete all as specified.

S&F PVC (SWR) pipes single socketed, dia of pipe 75mm, in any length with rubber ring joints, laid in trenches complete all as specified.

S&F in replacement PVC (SWR) bend, any radius, for dia of pipe 110mm, complete all as specified.

S&F in replacement PVC (SWR) bend, any radius, for dia of pipe 110mm, with or without access door complete all as specified.

S&F in replacement PVC (SWR) branch piece, junction (single/double), 'Y' (single/ double), equal or unequal with access door, dia of pipe 110mm complete all as specified.

S&F in replacement PVC (SWR) branch piece, junction (single/double), 'T' (single/ double), equal or unequal with access door, dia of pipe 110mm complete all as specified.

M&L cement concrete 1:3:6 type C-1, using 20mm graded stone aggregate, as in blocks of hold fasts, back fill of presssed steel chowkats, roof kerb, mud stop, egdes rounded complete all as specified.

M&L for 50 mm thick cement concrete 1:3:6, type C-2, (using 40mm graded crushed stone aggregate) as in plinth protection / path, finished even and fair without using extra cement complete all as speciified.

M&L reinforced cement concrete 1:2:4 type B1, using 20mm graded stone aggregate, as in shelves, cover slab etc including form work to soffits and sides of concrete including demolition of reinforced concrete complete all as specified.

M&L for use and waste of form work to Chullah hoods, chajjas, weather shades, corbels, water troughs and similar items including edges rough finished surfaces of concrete complete all as specified and directed.

M&L for use and waste of form work to conctrete flats,treads,breaks in floors including edges rough finished surfaces of concrete complete all as specified and directed.

M&L cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate, as in blocks of hold fasts, back fill of presssed steel chowkats, roof kerb, mud stop, egdes rounded complete all as specified.

M&L TMT bars 8/10mm dia and over, cut to length, bent to shape required, including cranking bending spirally for hooping for column, hooking and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Excavation in trenches not exceeding 1.5m in width and not exceeding 1.5m deep, in soft/loose soil for foundation, laying of pipes, cables, wells, cesspits, manhole, pier holes & getting out complete all as specified and directed.

Returning, filling in trenches including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed.

Removing excavated material to distance not exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

E/M-Portion:-Taking down old unserviceable point wiring from existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, regulator and socket etc and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing complete all as specified and directed.

M&L for point wiring for one light/fan/bell/buzzer point controlled by one 1-way switch complete with 1.5 Sq mm (nominal area) FR, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked, in and including PVC concealed conduit ISI marked of size 20 mm dia and 1.5 mm wall thickness and PVC conduit fittings such as tees, bends, elbow, reducers, in junction box including cutting, chasing, making good in CM 1:3 and 1.5 Sq mm (nominal area) FR, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked as earth wire, connecting to common earth dolly with thimble, including pressed steel powder coated MS sunken box of suitable size, covered with & including 3 mm thick bakelite, laminated hylem sheet top cover and making good surface as original by plastering and white / colour wash / distemper etc complete all as specified. Note: The cost of MS sunken box and bakelite sheet is included in the unit quoted rate.

M&L for point wiring for one light point controlled by two 2-way switch complete with 1.5 Sq mm (nominal area) FR, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked, in and including PVC concealed conduit ISI marked of size 20 mm dia and 1.5 mm wall thickness and PVC conduit fittings such as tees, bends, elbow, reducers, in junction box including cutting, chasing, making good in CM 1:3 and 1.5 Sq mm (nominal area) FR, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked as earth wire, connecting to common earth dolly with thimble, including pressed steel powder coated MS sunken box of suitable size, covered with & including 3 mm thick bakelite, laminated hylem sheet top cover and making good surface as original by plastering and white / colour wash / distemper etc complete all as specified. Note: The cost of MS sunken box and bakelite sheet is included in the unit quoted rate.

All as per Srl Item No 95 here-in- before but for one socket outlet point 5 amps on the same board.

All as per Srl Item No 95.00 here-in-before but for one socket outet point 5 amps on independent board.

All as per Srl Item No 95.00 here-in-before but with 2.5 Sq mm FR copper wire with 2.5 Sqmm FR copper earth wire for power point on independent board.

S&F switch piano flush type 5 Amp AC single pole one way, 230 volts, complete all as specified.

S&F switch piano flush type 5 Amp AC single pole two way, 230 volts, complete all as specified.

S&F socket outlet 5 Amps, 2/3 pin combined, 230 volts, AC complete all as specified.

S&F switch piano flush type 15 Amps, 230 volts, AC complete all as specified.

S&F socket outlet 15 Amps, 2/3 pin combined, 230 volts, AC complete all as specified.

S&F ceiling rose surface bakelite 65 x 50mm three terminals complete all as specified and directed.

S&F lamp holder insulated body with back plate batten / angle type for batten fitting complete all as specified and directed.

S&F LED bulb 9 watt pin type 230 volts cool day light 6500 K complete all as specified and directed.

S&F MCB C Curve type, 10 KA, 6 to 32 Amp, Single Pole with over load and short circuit protection complete all as specified and directed.

S&F MCB C Curve type, 10 KA, 40 to 63 Amp, single Pole, with over load and short circuit protection complete all as specified and directed.

S&F MCB C Curve type, 10 KA, 40 to 63 Amp, double Pole, with over load and short circuit protection complete all as specified and directed.

Supply and fixing Distribution Board, double door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 08 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections including taking down old unservicable boards complete all as specified and directed.

Supply and fixing, wall/ceiling mounted, LED 18 Watt PC Diffuser tube light fitting complete with all accessories, 1x18 Watt LED tube rod and making necessary connection with PVC insulated copper twin core 23/0.0076 twisted wire complete all as specified and directed.

Supply and fixing, wall/ceiling mounted, LED 9 Watt PC Diffuser tube light fitting complete with all accessories, 1x9 Watt LED tube rod and making necessary connection with PVC insulated copper twin core 23/0.0076 twisted wire complete all as specified and directed.

S&F GI pipe 25mm dia light grade for cable protection, fixed to poles, under road, along wall inculding necessary MS clamps complete all as specified and directed.

S&F, in replacement, fan regulator, step type, heavy duty, 230 volts, AC complete all as specified.

S&F bell Ding Dong including bell push flush type single pole 5 amps one way 230 volt AC complete all as specified and directed.

Supplying and fixing MCCB incomer MS sheet steel enclosure distribution boards, double door vertical type CRCA factory made,TPN,vertical 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB (160 Amps, 36 KA,4 POLE TP, 415 volts, 50 HZ= 01 No) with insulated material like polyester or with epoxy powder coating and IP 43 protection, surface mounting complete all as specified and directed. Note:- MCCBs shall be measured and paid separately.

S&F, in replacement, security light IP 66 with high power LED, 25 watt, energy saving, environment friendly, including bracket made out of GI pipe medium grade 40 mm bore 1.2 mtr long, made to shape, fixed with MS clamps of MS flat 40x6mm, nuts, bolts and washer and making connection with and provision of electric cable complete all as specified and directed.

Supply and fixing new generation energy saving and environmental friedly long life10 watt LED,6000K bulk head luminaire including builtup LED with opal diffuser light fitting all as specied and directed Make - Halonix, Cat part No-HLSLD-C10-45CWL or Equivalent cat part in makes specified in appendix 'B'

M&L for sub main wiring consisting two single core PVC insulated cable with stranded copper conductor, size 6 Sqmm, copper earth wire 6 Sqmm, drawn in and including concealed non metalic PVC conduit, 1.5 mm thick, 25 mm dia (external) inclusive of MS junction / terminal boxes and all fittings and accessories including taking down old unservicable sub main wiring complete all as specified. Note:- Two run of cable 6 Sqmm and one run of 6 Sqmm earth wire including PVC conduit shall be measured as 'One Unit'.

Supply, laying and testing in replacement XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty with aluminium conductor, 1100 volts grade, 25 Sqmm 4 core, including thimbles / lugs / cable gland etc, laid in duct / trench / along pole etc complete all as specified.

M&L for sand cushioning with a layer of fine sand 8 cm thick before laying the cable and 15 cm after laying the cable in trenches to cover under ground cable complete all as specified and directed. Note :-Punned down thickness of sand shall be considered for measurement)

Supply and lay, bricks, common burnt, sub class 'B', old size, for protection of cable, laid in trenches over cable, length of brick perpendicular to directon of cable, complete all as specified and directed.

M&L for earthing complete with GI earth plate electrode 600mmx600mm, 6mm thick, burried in ground vertically to a depth not less than 2.25 meters below ground level with top edge of the earth plate to a depth not lesss than 1.5 meter below the ground level, earth plate surrounded by 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron earth lead strip of 32x6mm by means of GI nuts, bolts and washers etc all as shown in Electrical Plate No. 5 of SSR Part-I connected to earthing test point including testing on completion complete all as specified. Note:- (i) The cost of excavation & earth work shall be included in the quoted rates. (ii) Earth lead beyond 7.5 m from electrode to earth terminal shall be measured separately (iii) On testing, after completion, if desired earth resistance is not obtained, the earthing will be redone at no extra cost and quoted rates shall be inclusive of this aspect.

Bharat Builder

M/s. M Company

m/s. gopal krishan