SPECIAL REPAIRS TO SINGLE OFFICERS ACCOMMODATION MEHTA BLOCK, OFFICERS MESS, 1 EME CENTRE UNDER GE(NORTH) SECUNDERABAD

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing, complete all as directed.

M&L for glazed ceramic tiles of 1st quality and size of 300 X 200 X 7 mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile and including laying over 10 mm thick back coat/plastering in CM 1:4 complete all as specified and as directed.

M & L Plain Cement concrete type B-0, 1:2:4 (using 20mm size graded stone aggregate ), 25mm thick as in sub base all as specified and as directed.

M&L for 10mm thick vitrified ceramic tiles (square or rectangular), area of each tile not exc 0.36sqm ,of superior quality as in floor surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tilesand including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for 10mm thick vitrified ceramic tiles (square or rectangular), area of each tile not exc 0.36sqm ,of superior quality as in floor surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles and over 10 mm thick back coat/plastering in CM 1:4 as in skirting/ dados complete all as specified and as directed.

M & L for non skid ceramic coloured tiles, 7 to 8 mm thick (Joint free) (square / rectangular) area of each tile exc 0.11 Sqm and not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

All as per Itme No 6.00 abvoe but area of each tile exc 0.06 Sqm and not exceeding 0.11 Sqm complete all as specified and as directed

M&L Rendering 15 mm in cement mortar 1:4, on fair faces of brick work and finished fair and even smooth with using extra cement and mix with 3% water proofing compound by weight of cement complete all as speciified and directed. Note : WPC shall be measured and paid saparately

Supply only water proofing compound.

Demolition of brick masonary or stone masonary built in cement mortar including all quoins, arches, pillars etc but excluding ashiar facing dressed stone work and precast articles complete all as sepcified and directed

M&L Brick work with subclass B bricks, straight or curved on plan exc 6mtr mean redius built in CM 1:6 complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in cement motor 1:4 complete all as specified and directed.

M&L for stone walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and as directed.

M&L Rendering 15mm thick in CM 1:6 on fair faces and other than fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for prepration of newly plaster surface of walls and applying two coats of oil bound distempers over one coat of alkali resistant primer and two coats of wall care putty complete all as directed

Taking down cement plaster on brick or stone walls etc including racking out joints hacking for keys scrubbing down with water etc., complete all as specified and directed.

M&L Rendering 10 mm thick finished fair and smooth without using extra cement in CM 1:3, in ceiling surfaces complete all as specified and as directed.

M&L precast reinforced cement concrete 1:2:4, type B-1 (using 20mm size graded stone aggregate) as in shelves etc set in cement mortar (1:6) complete all as specified and directed.

M&L for mild steel TMT bars 8mm to 10mm dia as in stirrups, spacers and binders and over cut to length bend to shape required including cranking, bending, sprillay for hooping for columns, hooking ends and binding with and including MS wire (annealled) not less than 0.90 mm dia complete all as specified and as directed.

Dismantling of boarding of any description and in any position etc complete all as specified and directed

S & F 18/19 mm thick Prelaminated Particle Board, interior grades, prelaminated one sides with decorative choice laminated & other sides balancing white lamination, fixed to screws to timber frame work complete all as specified and directed.

M&L 20mm thick granite machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing completed with and including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for rounding to edges of stone slabs one sdge, such as in steps, cooking platform complete all as specified and directed.

Taking down chowkats or frames with shutters without taking of shutter from frame, area exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and directed

All as per itme No 24.00 abvoe but area n.exc 1.5 Sqm each complete all as specifed and directed

Taking down shutters of any description exc 1.00 Sqm and n.exc 2.00 Sqm each complete all as specified and directed.

All as per itme No 26.00 abvoe but size n.exc 1.0 Sqm each complete all as specifed and directed

Taking down and re-fixing of shutters in same opening after easing of any description exc 1 Sqm and n.exc 2.00 Sqm each complete all as specified and directed.

All as per itme No 28.00 abvoe but size n.exc 1.0 Sqm each complete all as specifed and directed

S&F as in repairs, 100mm butt hinges, med weight, cold rolled mild steel and fixd complete all as specifed and directed

All as per itme No 30.00 abvoe but size 75mm complete all as specifed and directed

S & F as in repairs, 300 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S & F as in repairs, 150mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S & F as in repairs, 150mm long extruded aluminium anodised alloy handles, febricated type complete all as specified and directed.

S & F as in repairs, PVC wire mesh (male and female type) for mosquito proofing as in windlows complete all as specified and directed. Note : Sample approved by GE

S&F 35 mm thick flush shutters ,solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 2nd class hardwood 35mm thick Glazed and skeleton shutters for windows, open rebated and prepared to receive glass, gauxe, etc. (without sash bars, edge of framing plain, chamfered or rounded, fitted with cut and mitred bes for securing glass, etc: sizes of members of shutters as aspecified in SSR Part-I, Section 8. clause 8.20 (b) : supplied and fitted to chowkats, complete all as specified and directed.

S & F 2nd class hardwood 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauxe, etc. (without sash bars, edge of framing plain, chamfered or rounded, fitted with cut and mitred bes for securing glass, etc: sizes of members of shutters as aspecified in SSR Part-I, Section 8. clause 8.20 (a) : supplied and fitted to chowkats, complete all as specified and directed.

S & F for galvanized mild steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless seel wire staples, etc complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame work, stone, concrete or brick surrounds, glazed with putty or fixed with beadings complete all as sepcified and directed

S & F 3mm thick sheet glass, ordinary quality, glazing with oil putty in square panes, not exc, 0.50 sqm each pane complete all as specified & directed.

M & L for preparation of new wooden surfaces of any description, not other wise described over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of pink primers complete all as specified and directed.

M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions complete all as specified and as directed

S&F in repairs, helicla door spring of size 300mm, ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed

S&F factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.

S & F 100 mm long extruded aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 21. complete all as specified and directed.

S & F 150 mm long aluminium handle, cast type, anodised extruded section complete all as specified and directed.

S & F aluminium anodised barrel tower bolt of extruded section of size 150 mm long complete all as specified and as directed.

S & F in repairs vitreous china wash down water closet (pedastal pattern) white, complete including PVC seat cover and PVC low level flushing cistern of 10 Ltr capacity and PVC flush pipe complete all as specified and as directed.

S & F in repairs counter top coloured wash basin 600 x 460mm over all size fixed with necessary fixing arrangements including waste pipe, waste coupling, connection pipe, from pipe to WHB with chromium plated 15mm dia flexible pipe etc complete all as specified and as directed. Make : Hindware Kylis Cat No - 91056 or equivalent in list of approved makes

S & F in repairs, glass corner shelf of size 9" bore with chromium plated rail etc complete all as specified and as directed. Make : Jagur Cat No - 1173 or equivalent in list of approved makes

S & F in repairs, chromium plated toilet paper holder complete all as specified and as directed. Make : Jagur Cat No - 1151N or equivalent in list of approved makes

S & F in repairs, chromium plated towel ring complete all as specified and as directed. Make : Jagur Cat No - 1121N or equivalent in list of approved makes

S & F GI tubing of size 20 mm bore, medium grade, laid in floors/ walls and ceiling including taking out old tubing complete all as directed and as specified

S & F GI tubing of size 15 mm bore, water tubing connealed including making necessary grooves and making good the surface with CM 1:3 of 'medium grade' with all fittings and fixed complete to walls and ceiling or laid in foors including taking out old tubing complete all as specified and directed.

S&F in repairs, PVC ( SWR ) pipes 110 mm bore fixed to walls single socketed with rubber ring joints complete all as specified and directed.

All as per Item No 56.00 above but size of pipes 75mm bore complete all as specified and directed

S&F PVC connections 15mm size with PTMT nuts of length 600mm all as specified and as directed.

S&F in repairs, PVC (SWR) bends 110 mm bore, any radius with oval access door complete all as specified and as directed..

S&F PVC (SWR) bends 75 mm bore, any radius with oval access door complete all as specified and as directed..

S&F in repairs, (2-in-1) chromium plated bib cock with wall flange suitable for 15mm bore pipe complete all as specified and as directed. Make : Jaguar Cat No 041KN or equivalent in list of approved makes

S&F in repairs, wall mixing valve including three joints to steel pipe or unions or plugging and securing to walls chromium plated with wall flange suitable for 15mm bore pipe complete all as specified and as directed.

S&F in repairs, stop cock (angle cock type) cast copper alloy, screwed down, high presur with crutch handle, screwed both ends for 15mm bore iron pipe or for unions complete all as specified and directed. Make : Jaguar cat No CON 053 or equivalent in list of approved makes

S&F in repairs, pillar taps of 15 dia bore, cast copper alloy with crutch or butterfly handle, screwed down, fancy type screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. Make : Jaguar cat No CON 167 or equivalent in list of approved makes

S&F chromium plated health faucet with health faucet tube 1.5m long and stand etc screwed for 15mm bore iron pipe or 2-in-1 tap complete all as specified and as directed. (Make : Jaguar cat No ALD 573 or or equivalent in list of approved makes

S&F chromium plated overhead shower 150 x 150mm square shape single flow, ABS body cgrine okated wutgh garat face oakte wutg rubit cleaning system complete all as specified and as directed. (Make : Jaguar cat No OHS 35495 or equivalent make as approved)

S&F in repairs, looking mirror decorative designer type of size 900x750x6 mm thick over 9mm thick plywood including complete all as specified and as directed.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, including taking down old tank complete all as specified and directed.

S&F in repairs, 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed ( minimum weight 200-210gms) complete all as specified and directed.

Disconnecting existing tanks of capacity exc 500 litres a n.exc 1000 litres, setting aside (or lowering if required) for repairs , cleaning etc and hosting if required reconnecting and re-fixing in position complete all as specified and directed. Note : cleaning, repairs, etc will be measured and pad saperately

M & L for preparation of old painted surfaces of steel and iron work of any description exc 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

M & L for preparation of old wooden surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

M&L complete removal of existing treatment applying two coats of white wash on ceiling complete all as specified and directed

M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M&L complete removal of existing treatment and applying two coats of oil bound distemper over a coat primers with two coats of wall care putty complete all as directed by Engr-in-charge.

M&L complete removal of existing treatment on brick/stone/plastered wall surface and applying two coats of apex ultima weather proof paint over a coat of apex ultima primer including preparation of surface etc complete all as directed by Engr-in-charge.

S&F 20mm bore decorative powder coated curtain rod with decorative finials complete all as specified and directed.

M&L for preparation of roof surfaces by sweeping with wire brushes to remove projections and cleaning with water from dust and dirt and priming roof surfaces by application of one coat of oil based bitumen emulsion primer @ 0.3 Ltr/Sqm ( or as per the directions of manufacturers instructions) and providing water proofing treatment with APP based polymeric membrane minimum weighing 3.0 Kgs/Sqm and minimum 3mm thickness reinforced with polyester non woven fabric (weight not less than 150 gm / sqm ) as per IS 3384 on primed surface by forced application with 10cm over laps and applying a coat of blown bitumen 85/25 @ 1.2Kg/sqm on top of membrane and finally coating the surface with a coat of bituminious aluminium paint at the rate of 100gm per Sqm complete all as directed and as specified.

Demolition of lime/cement concrete of any description and in ny position not otherwise specfically provided for complete all as specified and directed

M & L PCC (1:2:4) type B-0 (using 12.5 mm size graded stone agg) as in levellig/padding course on roof slab for water proofing treatment complete all specified and directed

Demoltion of cement concrete in ground floor/paving not exceeding 15cm thick below or above ground level unreinforced complete all as specified and directed.

M & L for 75 mm thick cement concrete 1:3:6 type C-1, using 20mm graded stone aggregates as in plinth protection finished fair and even with using extra cement. complete all as specified and directed.

M&L for forming construction (Dummy) joint 30mm deep and 10mm wide filled with sealing compound grade "A" complete all as specified and directed

M&L for chequered cement concrete tile 200 mm x 200 mm x 20 mm thick set jointed and pointed in neat cement slurry in floor with grey cement and pigment and including 15 mm thick screed bed with cement mortar 1:6 complete all as specified and directed.

Cutting holes in stone walls depth exceeding one brick and not exc two brick built in cement mortar for inserting holdfasts and making good dismantled portion in CM (1:3) or cement concrete 1:2:4 type B0 complete all as specified and directed.

S&F aluminium sheet 0.50 mm thick as in covering to draining board board/doors fixed with nails complete all as specified and directed.

M&L for grinding and polishing to existing kota stone flooring complete all as specified and directed

S & F 2nd class hard wood in fillets, square, rectangular in section wrought, secured with nails sectional area exc 13 Sq cm and n.exc 25 Sqcm fixed in repairs complete all as specified and directed.

All as per Item No 88.00 abvoe but area exc 6 sqcm and n exc 13 Sqcm complete all as specified and directed

S&F steel windows with three panels with top three panels with double shutter (fly proof and glazed shutter) made with galvanized steel colour coated/ powder coated (base steel as per IS 513 'D', galvanized as per IS 277 with zinc of 120 gm/sqm) with total coating thickness of 0.6mm ( outside for glazing and inside gauged shutter) sections for frame should be 72mmx55mm, section for mullian should be 72mmx50mm section for shutter frame should be 47mmx20mm and section for fixing glass bead should be 12mm x12mm and section for fly mesh shutter frame should be 40mm x20mm mesh fixing should be of 18mm x 0.6mm. Stainless steel wire mesh of 0.45mm dia and avarage aperture 1.40mm shall be used for fly proofing. 4mm thick plain sheet glass to be used for glazing of glazed shutters with total window coverd with saftey grill, complete all as specified and directed.

S&F steel windows with two panels with top two panels with double shutter (fly proof and glazed shutter) made with galvanized steel colour coated/ powder coated (base steel as per IS 513 'D', galvanized as per IS 277 with zinc of 120 gm/sqm) with total coating thickness of 0.60mm ( outside for glazing and inside gauged shutter) sections for frame should be 72mmx55mm, section for mullian should be 72mmx50mm section for shutter frame should be 47mmx20mm and section for fixing glass bead should be 12mm x12mm and section for fly mesh shutter frame should be 40mm x20mm mesh fixing should be of 18mm x 0.6mm. Stainless steel wire mesh of 0.45mm dia and avarage aperture 1.40mm shall be used for fly proofing. 4mm thick plain sheet glass to be used for glazing of glazed shutters with total window coverd with saftey grill, complete all as specified and directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/ power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified

M&L for point wiring on concealed conduit complete all as specified with 1100 Volts grade 1.5 sqmm PVC with multistranded copper conducter conforming to IS:694:1990 with ISI markking ( For Phase, Neutral and Earth) in and including non metallic PVC rigid coundit medium grade with ISI mark of size 20 mm dia with all accessories concealed in wall/ceiling/floor/roof etc, for fixing modular switches, sockets, fan regulators etc of suitable modules and earth wire to be connected to commom earth dolly/pressed steel terminal boxes of 1.6 mm thick MS duly painted with red oxide metal primer including fixing/ grouting sunken/ surface as per site requirement covered with 3 mm thick laminated hylam sheet including running up to 1.5 Sq mm copper conducter PVc insulated cable as earth continuiy conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ requlators etc all as soecified for and directed foe the followig :-

(a) One light/bell point controlled by one, one way switch 5A, SP

(b) One ceiling / exhaust fan point controlled by one, one way switch and regulator

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the independent board

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board

(e) One light point controlled by two 2 way switch, 5A, SP

Description all as per item No. 93 here-in-above but using 2.5 Sqmm single core copper conductor cable of multistranded PVC insulated unsheathed 1100 volts grade for 3 Pin 15 Amps switch socket combination point on independent board including running 2.50 Sqmm copper conductor PVC insulated cable earth continuity conductor all as specified and as directed.

S & F Switch MODULAR 1 WAY 6 amps, 230 volts all as specified and as directed..

S & F Switch MODULAR 2 WAY 6 amps, 230 volts all as specified and as directed..

S & F MODULAR socket 5 pin 6 amps 2 MODULE 230 volts all as specified and as directed.

S & F MODULAR socket 6 pin 6/16 amps 2 MODULE 230 volts all as specified and as directed.

S&F MODULAR ceiling fan regulator step type, heav duty, suitable to work 230 volt complete all as specified and directed.

S & F Switch MODULAR 1 WAY 16 amps, 230 volts all as specified and as directed..

S & F Switch MODULAR bell push 6 amps, 230 volts all as specified and as directed..

S & F bi-directional fancy holder with plate (metal ring) complete all as specified and directed

S&F ceiling rose surface bakelite 5 amps 230 volt with three terminal 50x65 mm size complete all as specified and directed

S & F call bell ding dong AC, 230 volts, SP complete all as specified and directed

S & F Wall mounted Indus plus LED batten 20W, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver including LED lamp 1 X 20 W, 230 Volts, bipin holders, Diffused type connector block, internally prewired with necessary mounting arrangements including all accessories with new 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make : Havells cat No. REGALBATTENT8UPTO1X22WSSBSWH including tube rod cat Np. PHOTONULTRA1213T8SSTL20WLED865SPC or equivalent in list of approved makes

S & F LED security light fitting of 25 Watt with deep drawn housing including all accessories, lamp and connecting up with and provision of 2.5 Sqmm 3 core 1100 volts grade multistranded copper conductor cable from light fitting to junction box and bracket made out of GI tubing 25mm dia bore not less than 0.6m long bend to required shape for fixing to wall/poles with 2 nos MS clamps made out of MS flat 40 X 5 mm with MS nuts, bolts and washers complete all as specified and as directed. Make : Havells cat No. ENDURAPEARLSL25WLED757SAYTOPS or equivalent in list of approved makes

S&F sheet metal enclosure, vertical type MCB DB TPN 4 way, double door, with 160 Amps rated bus bar 415 Volts, suitable for and including 100 Amp, FP MCCB, 10KA as incommer with magnetic locking system including painting by red-oxide one coat and powder coated complete all as specified and directed. Make: Havells Cat No. DHDLVDRWGOFO04 or equivalent in list of approved makes

S&F sheet metal enclosure MCB DB SPN 12 Way with 200 Amps rated bus bar 240 Volts double door magnetic locking system complete all as directed and specified. Make: Havells Cat No. DHDPSHODRW12/DHDPSHODPW12 or equivalent in list of approved makes

S&F MCB SPN 240 Volts 'C' Series suitable for fixing in MCB DB's of capacity 40/ 60 Amps complete all as specified and as directed.

S&F MCB SP 240 Volts suitable for fixing in MCB DB's of capacity 6 to 32 Amps complete all as specified and as directed.

M&L for sub main wiring with two runs of single core 6 sq mm PVC insulated unsheathed copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and conduit accessories of medium grade of 25 mm dia including one run of single core 6 sq mm PVC insulated unsheathed multistranded 1100 Volts grade copper conductor cable as earth continuity conductor alongwith the wiring and connected to common earth dolly including removing the existing unserviceable submain wiring and making good the disturbed surface to match with the existing surface complete all as specified and as directed. Note : 2 runs of 6 sq mm cable, one run of 6 sq mm earth continuity conductor and one run of conduit shall be measured as one unit length.

M&L for sub main wiring with two runs of single core 4 sq mm PVC insulated unsheathed copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and conduit accessories of medium grade of 20 mm dia including one run of single core 4 sq mm PVC insulated unsheathed multistranded 1100 Volts grade copper conductor cable as earth continuity conductor alongwith the wiring and connected to common earth dolly including removing the existing unserviceable submain wiring and making good the disturbed surface to match with the existing surface complete all as specified and as directed. Note : 2 runs of 4 sq mm cable, one run of 4 sq mm earth continuity conductor and one run of conduit shall be measured as one unit length.

Earthing complete with galvanised steel earth plate electrode 60cmx 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts, nuts, checknuts and washers etc., of galvanised iron and earth lead protected by provision of GI pipe 15 mm bore of light grade from earth electrode to DBs/main switch all as shown in Electrical Plate No.3 of SSR Part-I and connected to main switch board including excavation and earth work in hard dense soil, returning in and removal of surplus soil to a distance not exc 50m, PCC chamber in 1:2:4 Type B-1 using 20mm graded stone aggregate, 40mm thick RCC Cover in 1:2:4 type B-1 reinforced with XPM of weight not less than 4 Kg/Sqm and frame of angle iron 25 x 25 x 6 mm with lugs 2 Nos. and with 6mm dia MS bar handle made to shape, 20 mm dia medium grade GI watering pipe perforated at bottom 1.75m long with funnel and wire mesh, common salt and charcoal filling, connection to test point complete all as specified.

S&F sheet steel MS enclosure warth plug socket 2 pin 20 Amps with metal top 20 Amps with MCB 32 Amps complete all as specified and directed

Taking down existing geyser 25 ltrs capacity any type suitabley disconnecting all electrical and water supply conection, opening and dismantling the complete geyser, cleaning all serviceable parts completely including descaling the geyser, re-assembling the geyser, painting of geyser after scraping, cleaning and preparing surface for painting and painting with two coats of white enameled paint of approved make, testing for proper functioning and refixing the same in position, reconnecting the geyser with electric and water supply adn testing complete all as directed. Note: Unit rate quoted shall be deemed to include minor items i.e nut bots, screws, lugs etc.

S&F rubber PVC gasket to ensure water tightness for 25/35 litres capacity complete all as specified and directed

S&F MS base plate cup any type with screws of suitable size as per requirement complete all as specified and directed

S&F heating elements as per existing size/model of the 1/1.5 KW rating as required at site including rubber washers of any make and type complete all as specified and directed

S&F copper inner tank of 25 ltrs capacity geyser tank by made out of steel sheets appropriate thickness complete all as specified and directed

S&F thermostat for the geysers of the 25 to 35 ltrs capacity complete all as specified and directed

S&F 1100 volts grade cable flexible 3 core PVC insulated PVC sheathed with standard copper conductor of size 2.5 Sqmm all as specified and directed

S&F PVC connection cotton braided heavy duty with brass union/coupling of length 450 mm with rubber washer suitable for 15mm dia pipe and fixing in position, superior quality as approved by Engr-in-Charge.

S&F PVC connecting tube 450mm long with two brass adopters suitable hot water for 15mm dia pipe and fixing in position, superior quality as approved by Engr-in-Charge.

S&F apperture plate assembly for 25/35 ltrs geysers complete all as specified and directed

M&L for repair of leakage of inner tank 25/50 ltr capacity geyser by brazing/soldering, testing including cutting of nut bolt as required with gas welding cutter and providing new nut, bolts, washers etc complete all as specified and directed

S&F in repairs, foundation nuts, bolts & washers heavy duty for fixing geyser complete all as specified and directed

S&F in repairs, chromium plated pressure release valve of existing make/size complete all as specified and directed

Disconnecting and removing ceiling fan of 1200/1400 mm sweep and wall mounted fan and exhauust fan from any height from electrical connections, bringing down, opening up, cleaning internally and externally , replacement of condensor, ball bearing, bushes, split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, reassembling, replacement of minor worn out/defective parts, refixing in original position including minor repairs for smooth functioning and provision of new flexible wire of size 23 / 0.0076 multistranded copper conductor cable from ceiling rose to fan including testing on completeion all as specified and as directed. Note : (a) Replacement of unserviceable parts shall be measured and paid seperately. (b) PVC 2 core copper cable multistandrad of size 1.50 sqmm from ceiling fan deemed to be included in the rate quoted by the contractor (b) Labour element for replacing of unserviceable parts is deemed to be included in the rate quoted.

Supply only the following items suitable for ceiling fans / exhaust fans fo any size and sweep

Capacitor 2 Mfd / 2.5 Mfd capacity 240 Volts

Sealed ball bearing /bush

U clamps with nut, bolts & split pins heavy duty

MS rod

Nut of bolts washers for fan blades fixing

M&L for rewinding of stator complete with super enameled copper wire of gauge/weight of copper coil, quick varnishing oiling, greasing insulating materials including replacement of worn out parts like u/s cutter pin, nut, screw, check nuts and bolts as required including cleaning of body and testing of size 1200/1400mm sweep ceiling fans and 230/300 mm exhaust fans of nay make/model complete all as specified and directed. Note: spare parts except mentioned above and rewinding to be replaced will be measured and paid separately under respective items of schedule

EXELLENT POWER CORPORATION

M/S NOVA CONSTRUCTIONS

SKY CONSTRUCTIONS

GUTHIKONDA BROTHERS

M/s GM Constructions

K LAKSHMAN SINGH AND CO

B R C CONSTRUCTIONS

M/s Bhavani Constructions

STANDARD AGENCIES