SPL REPAIR TO OR COOK HOUSE AND ADDN / ALTN OF DRYING AND IRONING SHED AT HQ DGBR UNDER GE (WEST), DELHI CANTT-10

Amount

Dismantling of tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in cement mortar complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20mm thick over 15mm thick cement screed base in Cement Mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Machine cut kota stone slab in skirting 20mm thick over 10mm thick cement screed base in Cement Mortar 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for granite work (any type of shade as approved shade as approved) table rubbed and polished in window-cills, cooking platforms, and like in single piece laid over & including bedding layer 15mm thick Cement Mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, polishing & half rounding of edges, complete all as specified and directed.

M&L for glazed rectified Digital/nano tech coloured tiles in vertical surface size 300mm x 600mmx7 to 10mm thick (As approved by user) set and jointed in neat cement slurry and pointed in coloured cement grout to match including rendering 10mm thick in Cement Mortar (1:3) as in backing coat including dismantling of old existing tiles including bedding finish complete all as specified and directed.

M & L for non skid coloured rectified tiles 7 to 8mm thick double charged/Nano Tech floor tiles area of each tile (300mmx300mm) in floors etc set & jointed in neat cement slurry and pointed in coloured cement grout to match including 15mm thick Cement Mortar (1:4) screed bed or bedding layer including dismantling of old existing tiles or flooring of any description all as specifiedall complete all as specified and directed.

M & L for Vitrified tiles (any shade) 8mm to 9mm thick double charged, high glossed of size of each tile (800mmx800mm) , in floors/Skirting etc set & jointed in neat cement slurry and pointed in coloured chemical grout to match including 15mm thick Cement Mortar (1:4) screed bed or backing coat including dismantling of old exisitng tiles or flooring of any description complete all as specified and directed.

Taking down wooden/steel chowkhats/door frame including shutter (without taking off shutter from frame) exc 1.5 Sqm and n.exc 4 Sqm each and removing to or from store complete all as specified and directed.

Taking down old window / ventilators with frame, any description, including guard bars not exc 1.5 sqm each , complete all as specified and directed.

S&F mild steel framed work as in door or gates of angle or other sections, cooler stands, with gusset plates rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and purpose made hinges or steel sheeting or other covering, running rails and guides) and hanging, fastening and fixing complete conforiming to Fe 290 Gde E-165 complete all as specified and directed.

S&F factory made 35mm thick 2nd class hard wood plain framed panelled door shutter two pannels with lock rail and panel of 9 mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces .The size of rail and style as per IS1003 part I kin seasonned chemically pressure treated complete all as specified and directed.

S&F 35mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat complete all as specified and directed.

S&F powder coated aluminium frame for doors, windows, ventilators, partition etc with one or more rebates, section weight not less than 0.55 Kg/RM including joining cleat for fixing etc complete all as specified and directed. Note : (1) Only aluminium items to be measured. (2) Glass, wiremesh to be measured & paid separately. (3) Minimum thickness of powder coating to be 50 micron.

S & F Anodised aluminium door shutters, aluminium section weighing not less than 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos, hinges(3 Nos), in each door anodised aluminum snap beading screws etc. complete all as specified and directed. Note :- (1) Glass, wiremesh to be measured & paid separately. (2) Minimum thickness of powder coating to be 50 micron.

S&F aluminium anodised powder coated sliding window comprising of sliding runner of two/three way aluminium frame section (weight not less than 0.80 Kg/RM) as per series-A, consisting of two sliding shutters and one wire mesh shutter made out of section (weight not less than 0.55 Kg/RM) with 4mm thick glass fixed with rubber and aluminium beading including down push type locking arrangement in glass shutter, fixed the frame with rawl plug complete all as specified and directed. Note :- (1) Glass, wiremesh to be measured & paid separately. (2) Minimum thickness of powder coating to be 50 micron.

S & F powder coated anodised aluminium grills weighing not less than 3.5 kg/sqm including channel, necessary fixing arrangement to the windows (Section approved by the GE) complete all as specified and directed.

M&L for stainless steel wire cloth of grade 304 (exterior grade) 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed to door/window frame fixed in repair complete all as specified and directed.

S&F butt hinges 100mm size, medium weight stainless steel and fixed by with screws to angle iron /steel chowkhat complete all as specified and directed.

S&F aluminium anodised barrel tower bolt, extruded section 200mm size complete all as specified and directed.

S&F aluminium anodised Handles cast type for 150mm size complete all as specified and directed.

S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work complete all as specified and direced.

M&L for brick work using well burnt bricks (old size) having compressive strength not less than 100 Kg/sqcm straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 with old size bricks complete all as specified and directed.

Material and labour for brick work using well burnt bricks (old size) having compressive strength not less than 100kg/sqcm straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and directed.

Taking down cement plaster of any description on brick wall or concrete surfaces including raking out joints in brick work, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering in Cement Mortar ( 1:6 ) on fair faces of brick work or concrete surfaces finished surface even and fair without using extra cement complete all as specified and directed.

M&L for applying layer of thick white wall care putty of thickness not less than 2mm for finishing the surface even to true aligned surface and smooth using sand papers etc complete all as specified and directed by Engineer-in-charge.

M&L for applying two coats of oil bound distemper (approved quality & tint) using painting rollers over a coat of alkali resistance primer on walls on prepared surfaces complete all as specified and directed.

M&L rendering 15 mm thick plaster in cement mortar 1:4 on fair faces of brick or concrete surfaces finished fair and even complete all as specified and directed.

M&L for prepration of new platered surfaces and applying two coats of 1st quality weather proof exterior acrylic emulsion over and including 2mm thick exterior grade wall care putty and a coat of extesior primer of same manufacturer on wall complete all as specified and directed.

Supply only liquid polymer based intergal water proofing compound complete all as specified and directed. Make : LW+ of Dr. fixid or equivalent in Fosroc/SIKA

M&L rendering 10mm thick on fair faces of concrete surfaces of ceiling in Cement Mortar 1:3 and finished even and smooth without using extra cement ccomplete all as specified and directed.

M&L for preparing of new plastered surfaces and applying two coats of white wash on ceiling complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for by mechanical means (like drill machine, Hilti, pneumatic chisel, etc) complete all as specified and directed.

M&L for reinforced cement concrete (Nominal mix) type B1 1:2:4 (using 20mm graded stone aggregate) as in kitchen slab, shelf, passage roof etc and like as including form work, providing smooth finish in bottom of kitchen slab, complete all as specified and directed.

M&L for TMT bars 6mm to 8mm dia cut to length bent to shape required including cranking, bending etc and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for by mechanical means (like drill machine, Hilti, pneumatic chisel, etc) complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection 75mm thick laid in bays and surfaces finished even and fair, including filling the joints with bitumen mastic complete all as specified and directed by Engineer-in-Charge.

S&F in repair 18/19 mm thick prelaminated MDF board, exterior grade both sides decorative choice laminations as in workstation, cupboards, mobile pedestals (drawer), inluding fixed with screws/anchoring clips/SS L clips, sliding runners, necessary fastners and accessory and finished with 1 mm thick PVC edge binding of suitable width on all exposed sides complete all as specified and directed.

S&F 100mm size stainless steel handle, bow shaped as per sample for cupboards complete all as specified and directed.

S&F in repair 75mm thick heavy duty stainless steel butt hinges for cup boards complete all as specified and directed.

S & F in repair 50mm drawer lock (as approved) gde-I complete all as specified and directed. Make : Godrej/ Harrison/ Link

S & F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade st. 240 complete all as specified and directed.

S & F 3mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer or fixed with L-type or J-type or cranked hook bolts in lieu of screw in roof, wall etc complete all as specified and directed.

S & F table top vitreous china wash hand basins, white, excluding taps, chain and plug and porcelain stopper but including CP Brass waste coupling, waste pipe & brackets) complete all as specified and directed. Make : Jaquar Cat Part No. LYS-WHT-0555 or equivalent in Parryware/ Cera/ Somany

S & F in repair 20mm dia bib tap long body with capstan head, screwed down, screwed for iron pipe, fancy type, cast copper alloy, chromium plated with wall flange complete all as specified and directed.

S & F in repair 15 mm dia pillar cock long neck with aerator, cast copper alloy fancy type, chromium plated,screwed down high pressure,with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe & fixed complete all as specified and directed. Make : Jaquar Cat Part No. CON-021KN or equivalent in GEM/ Marc/ Parko

S & F in repair 15 mm bore angle valve, cast copper alloy screwed down high pressure with capstain head with long shank & cup complete all as specifed and directed. Make : Jaquar Cat Part No. CON-053KN continental series or equivalent in GEM/ Marc/ Parko

S & F PVC connection 15mm dia and 60 cm long with 2 Nos PTMT check nuts with washers complete all as specified and directed.

S & F 15mm dia medium grade galvanised steel tubes with all fittings and fixed or concealed complete to walls and ceilings or laid in floors including taking down old steel GI tubing complete all as specified and directed.

All as per Item No 52 above but 20mm bore pipe complete all as specified and directed.

M&L for preparing of old decorated surfaces and applying one coat of white wash on ceiling complete all as specified and directed.

M&L for preparation of old treated surfaces of wall & applying one coat of oil bound distemper (approved quality & tint) using painting rollers on wall complete all as specified and directed.

M&L for preparation of old treated surfaces of wall, chhaja and sofits and applying one coats 1st quality weather proof of exterior acrylic emulsion on complete all as specified and directed.

Hard drawn steel wire fabric n.exc 4.00 kg/sqm cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia or tying with welding complete all as specified and directed.

S & F stainless steel letters (English/Hindi) consisting of 200mm high, 50mm width and 25mm depth hollow walls fixed on wall surface of any description sing stailess steel crews of suitable size or best quality adhesive complete all as specified and directed.

S & F 4mm thick aludecor ACP sheeting having coil thickness 0.50mm coloured as per approved colour using steel cleat, frame sealing and backup material complete all as per manufacturers instrution and complete all a specified and directed. Make : Aludecor Laminiations pvt Ltd. Material AL-45 or equivalent as approved by GE.

S & F 3D Acrylic sheet LED letters (English/Hindi) of 300mm hight, 50mm width fixed on ACP sheet as shape and design approved complete all as specified and as directed.

S & F MS tubular frame work for making including fixing of sign baord on wall with making 200x200mm PCC bed block in 1:3:6 and miking good of disturbed area and finished with matching of exisiting surfaces complete all as specified and directed.

M & L for grinding and polishing (mirror finished) complete all as specified and direced.

M & L for fabrication of stainless steel rack of grade 304 tubular section with & including 1mm thick stainless steel perforated sheet of shape & size as approved with locking arrangement, complete all as specified and direced.

S & F vitreous china, white european type water closet, including PVC seat cover, fixing with brass bolts, jointing to flushing cistern and flush pipe complete all as specified and directed.

M & L for chromium plated toilet paper holder complete all as specified and directed.

M & L for hand shower (health faucet) (ABS chromium plated ) with 8mm dia, 1m long flexible tube and wall hook complete all as specified and directed.

M & L for chromium plated jet spray including connection pipe complete all as specified and directed.

S&F 100mm bore CI spun pipes soil, waste or vent pipes in any length with or without ears with lead joints laid in trenches, floors or fixed to walls including dismantling of Cast Iron pipes etc complete all as specified and directed.

All as per item No. 69 above but 75mm bore of pipe complete all as specified and directed.

S&F in repairs 100mm bore spun cast iron bends/tee (any radius) diminishing pieces or tapers (larger bore to be measured) with oval access doors complete all as spd and directed.

S&F CI Cowl for 100mm bore of CI spun pipe complete all as specified and directed.

S&F in repair PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints fixed laid in trenches or in floors complete all as specified and directed.

S&F in repair PVC (SWR) bends 110 mm bore complete all as specified and directed.

S&F fibre glass reinforced plastic (FRP) door frame shall be three legged of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness. The laminate door frame moulde with fire retardant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibre glass from all sides. MS stay shall be provided at the bottom to steady the frame as per specification & drawing complete all as specified and directed.

S&F FRP door shutter 30mm thick glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacturer made with retardant grade unsaturated poyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP panels and confirming to IS 14856-2000 supply and fixing in the frame at site complete all as per specification & drawing complete all as specified and directed.

S&F PVC Handles 125mm size complete all as specified and directed.

S&F 200mm long aluminum, anodized barrel tower bolts of extruded section complete all as specified and directed.

Supply only PVC hinges 100mm long for PVC doors complete all as specified and directed.

Supply only PVC valve less syphonic action type flushing cistern 10 ltr capacity, low level, white with inlet, ball valve, float and handle including brackets and connection to pipes and fixing of chain and pull or lever if any complete all as specified and directed.

M & L for fabrication of stainless steel grating of grade 304 solid tubular section of shape & size as approved by GE, complete all as specified and direced.

S&F Anodised aluminium snap grid of size 605mmx605mm frame work for false ceiling and including 12mm thick fibre insulation boards ordinary type, fixed to timber/aluminium/GI framework with or without screws complete all as specified and directed by the Engr-in-Charge.

S&F curtain rods of stainless steel 25mm dia including decorative finials for suitable dia and brackets of curtain rod, fixed on wall etc complete all as specified and directed.

Dismantling of PVC water storage tanks exc 500 ltrs & n.exc 1000 ltrs capacity and removing from site complete all as specified and directed.

S&F rotational moulded polythylene water storage tanks 1000 Ltrs capacity, white coloured, triple layered (cylindrical vertical with closed top) hoisted including nipple suitable for water tank connection and fixed in position complete all as specified and directed.

Dismantling of brick tiles or terracing tiles single layer on roof complete all as specified and directed.

Demolition of mud phuska on roof slabs, any thickness including cleaning of roof surfaces and removing the debris upto the distance exc. 1.00Km but n. exc. 1.5Km complete all as specified and directed.

Scraping of old tar felt roof treatment over concrete padding of any thickness etc from roof incl finishes or junction or parapet and cleaning the surface (by mechanical means like grinder, etc) complete all as specified and directed.

M&L for water proofing treatment of roof slab in following stages:- (a) Rendering in Cement Mortar 1:3 with waterproofing liquid as per manufacturer's instruction over concrete surface finished even and smooth without using extra cement. (b) First coat of bitumen primer confirming to IS-3384@ 0.40 Kg/Sqm over plastered surface. (c) Second coat of binding material using blown type bitumen confirming to IS-702 Gde 85/25 @ 1.2 Kg/Sqm applied over bitumen primer. (d) Third layer of APP polymeric water proofing membrane, minimum 3mm thick and weighing not less than 3.0 Kg/Sqm with a centre core of 90 micron high density polyethylene film protected on both sides with a high quality polymeric asphaltic mix, the polymeric asphaltic mix will be protected on both sides with thermo fusable HMHDPE film as approved by GE, black finish reinforced with non-woven polyester matt, with a thermo fusable finish, torching with a propane or a butane gas torch, with a overlap of 75mm at the sides and 100mm at the ends complete all as specified and directed. Make: Ms Sika India Pvt Ltd/ Ms Fosroc Chemicals/ Ms STP limited/ Ms IWL India limited/ Ms Tiki Tar Danosa (India) Pvt Ltd/ Ms Torchtar Membrane & Bitumen Pvt Ltd Note: (i) The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators only. (ii) The cost of dismantling of PVC water tanks and connected steel tubing over the roof and their refixing after completion of work to be incl in this unit rate.

M&L for cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) on roof padding with water proofing compound surface finished even and smooth without using extra cement complete all as specified and directed. Note: Rate of WPC shall be included in unit rate

M&L for 40mm thick brick tiles are bedded in 15mm thick Cement Mortar 1:6 and jointed, grouted and pointed flush in Cement Mortar 1:3 mixed with 5% crude oil by weight of cement complete all as specified and directed.

All as per item No.91 above but except bricks tiles complete all as specified and directed.

Excavation in trenches in soft/loose soil not exc 1.5m wide and not exc 1.5m deep complete all as specified and directed.

Returning filling in, including spreading leveling, watering and well ramming in layers n. exc. 15 cm in soft/loose soil, complete all as specified and directed.

Earth filling under floors or in foundation including watering and consolidation well ramming including sporeading and levelling n.exc 25cm thick complete all as specified and directed. Note : Earth to be filled shall be obtained from item No. 93 above.

M&L for Anti Termite Treating the bottom and sides of excavation at the rate of 5 liters of emulsion per square metre of surface area complete all as specified and as directed.

M&L for Anti Termite Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.

M&L for Anti Termite Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.

M&L for Anti Termite Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

M&L for Anti Termite Treating the soil alongwith external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed.

M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone agg as in sub base to floor/ filling mass concrete complete all as specified and directed.

M & L for 100mm thick Plain Cement concrete type D- 2, 1:4:8 (40mm graded aggregate as in sub base complete all as specified and directed.

Material and labour for preparation of new or previously untreated wood or wood based surface of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint (approved tint) over a coat of pink primer complete as specified and directed.

Preparation of new steel surfaces of steel and iron work of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for PCC 1:2:4 type B1 for coping, hold fast blocks and similar work including form work to edges of concrete complete all as specified and directed by Engineer-in-Charge.

M & L for reinforced cement concrete (1:1.5:3 type A-1 for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

S & F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Dismantling of pavers blocks/tiles of any description or thickness in floors, aprons etc. laid dry or laid dry or pointed, complete all as specified and directed.

75 mm thick, PCC (1:4:8), type D-2 (using 40 mm graded stone aggregate), as in sub base under floor complete all as specified and directed.

M&L for 50mm thick fine sand layer spread uniformly over sub base complete all as specified and directed.

M & L for laying of Machine pressed precast concrete inter- locking tiles/paver block 80mm thick M-40 Grade of any colour, shape and size/grade with grey cement and no pigment including filling the joints upto full depth with fine sand, complete all as specified and directed by Engr-in-Charge.

All as per item No. 111 above but except machine pressed precast concrete inter locking tiels/paver blocks complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, in ridges, hips, valley gutter, drip and straight flashing and like, fixed with self tapping screws complete all as specified and directed.

S&F PVC (SWR) 110 mm bore rain water pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Taking down old unserviceable point wiring from existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, regulator and socket etc and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing complete all as specified and directed.

M&L for concealed point wiring with 3x1.5 Sq mm (nominal area) FRLS PVC insulated un-sheathed and stranded copper conductor cable(phase,neutral and earth wire)in and including PVC concealed conduit ISI marked of suitable size medium grade with PVC conduit fittings such as tees, bends, elbow, reducers including cutting chasing and making good to disturbed surface , earth wire, connecting to common earth dolly with and including pressed steel sheet Metal sunken box of suitable size for fixing modular switches/sockets etc with cover plate 3mm thick plastic laminated sheet for one light point / fan point/ exhaust fan point / circulator fan point / bell/ buzzer controlled by one 1-way switch/ bell push complete all as specified and directed. Note : The cost of cutting chasing for concealed wiring in wall /floor and including Metal boxes concealed in wall and moduler cover plates etc will be included in quoted rate.

All as per item no. 116 above but for one socket outet point 5 amps on the independent board complete all as specified and directed.

All as per item no. 116 above but for one socket outet point 5 amps on the same board complete all as specified and directed.

All as per item no. 116 above but with 3x 2.5 sq mm (Nominal area) FRLS PVC insulated unseathed and stranded copper wire conductor cable (phase ,neutral and earth wire) for 15 Amp power point complete all as specified and directed.

S&F in replacement of Modular switch 6 Amp, 1 way, 1 module size complete all as specified and directed.

S&F in replacement of Modular switch 16 Amp, 1 way, 1 module size with indicator lamp complete all as specified and directed.

S&F in replacement of modular socket two-in-one, 6 Amp universal type, 02 module size complete all as specified and directed.

S&F in replacement of modular Socket, 16 Amp, multipurpose shutter type, 02 module size complete all as specified and directed.

Supply and fixing in replacement of Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as specified and directed.

Supply and Fixing in repair Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated 20W LED 6000K (4 ft.) complete all as specified and directed. Make: Havells Model LHEWEBP7IN1W020 or equivalent in Philips/ Bajaj/ Crompton Greaves/ C&S Electric/ Halonix/ Polycab

Supply and fixing in repair Mirror light 02 fit Linnet reflection without shdows complete all as specified and directed.

Supply & Fixing in repair 18W LED Surface mounted downlight with white powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver complete all as specified and directed.

S&F in repair new generation energy saving and environmental friendly long life versatile pressure die cast alumonium IP-65 road way luminaire with high power 25 watt LED security light complete all as specified and directed. Make: Havelss Cat Part No: LHETBXU7PA6025 or equivalent in Philips/ Bajaj/ Crompton Greaves/ C&S Electric/ Halonix/ Polycab

Supply, laying and drawing in and including suitable size concealed PVC rigid conduits including cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 4.0 sqmm (as earth wire) of stranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete including connection complete all as specified and directed.

Supply & Fix in repair factory made epoxy polyester powder coated distribution board 4 way VTPN DB with metal double door (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for DPX 160, 4 pole MCCB and ELM as incommer and 12 SP MCBs outgoings complete all as specified and conforming to IS: 8623 along with cable end box for above DB including taking down old DBs complete all as specified and directed. NOTE :- (a) MCCB /MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed fit included in item rate

S&F in repair of MCCB 125 Amp 3 pole 16 KA at 415 V with fixed thermal megnatic release complete all as specified and directed.

S&F in repair of factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings and conforming to IS: 8623 alongwith cable end box for above DB complete all as specified and directed. NOTE:- (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F in repair of single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 including taking down old MCB's complete all as specified and directed.

S&F in repair of double pole MCB SPN 40 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, burieddirectly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point and PCC CI cover.funnel with watering pipe wiremese,and copper lugs etc,GI protection pipe of size,test point extra length of main earthing lead 7.5 mtrs ,connectiong lead from last point to main switch or switch board.or equipment to be earthed on testing after complete the earth resistance and earth will be done at no extra testing on completion complete all as specified and directed.

Supply and fixing of New celing fan 1400 mm sweep, BEE approved 5 star ratin energy efficient including blade ,canopy, down rod, regulator and connecting up including provision of three core flexible PVC FRLS cable with stranded copper conductor of size 0.75 sqmm from ceiling rose to connector of ceiling fan complete all as specified and directed.

S&F of sheet metal enclosure, SPN type with two pin & earth plug and socket (Industrial type DB) with and including one MCB SP, 'C' Curve type of capacity 20 Amp, 10 kA complete all as specified and directed.

Supply and fixing metalic type Havey duty Exhaust Fan 300mm,1400 RPM , single phase , including cutting of holes in a round shape,fixing Nuts , bolts,plastering and fixing the fan complete all as specified and directed.

Supply and fixing metalic type Havey duty Exhaust Fan 450mm,1400 RPM , single phase , including cutting of holes in a round shape,fixing Nuts , bolts,plastering and fixing the fan complete all as specified and directed.

Supply & fixing New electric storage water heater of capacity 25 ltr with vitreous enamel coating with all accessories and fittings arrangements, PVC connection pipe 600mm long -2Nos ,gate valve 15mm -01Nos ,fastner -4 Nos ,Nuts bolts etc and testing after installation complete all as specified and directed. Note: Rates are inclusive of all fitting from existing pipe line to electric storage water heater Make: Havells Model- Monza EC or equivalent in Crompton Greaves/ Bajaj/ Morphy Richards/ Lexus

Supply and fix flood light 50 Watt Ennergy saving Ip65 High Power COB LED as light soource complete all as specified and directed.

Supply, installation and testing of heavy duty, commercial type stainless steel Kitchen chimney with Size 900 mm, Deep silent, PVC Blowers, Tempered Glass Aluminium filter all connected accesssories for installation (Glossy Finish) with ducting as per site requirement complete all as specified and directed. Make : SIEMENS Model No LC98BD5421 or equivalent as approved by GE.

Supply and fix Plutoo Pnel surface mounted LED luuminaire suitable for 2x2 grid ceiling of 34 W LED lluminaire compplete with electronic driver. Make: Havells Cat Part No: LHEWEIP71W034 or equivalent in Philips/ Bajaj/ Crompton Greaves/ C&S Electric/ Halonix/ Polycab

Supply and fiix of lamp holder, PVC/Polycarbonate type with back plate suitable for B-22 Bulb and including B-22 Buulb and including LED inverter bulb 9 Watt complete all as specified and directed.

Material and labour for point wiring complete with 1.5 Sq mm (nominal area) FRLS PVC insulated un-sheathed and stranded copper conductor cable ISI marked and including PVC Casing Caping ISI marked of Suitable size and all fittings such as tees, bends, elbow, reducers including FRLS PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size for fixing modular switches / sockets etc one light point / fan point/ exhaust fan point / circulator fan point / bell/ buzzer controlled by one 1-way switch/ bell pushcomplete all as specified and directed. (Note : The cost of modular type Metal boxes and modular accessories like cover plates etc will be included in quoted rate.)

All as per item no. 145 above but One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board complete all as specified and directed.

All as per srl item no. 145 above but for one socket outet point 5 amps on the same board complete all as specified and directed.

All as per srl item no. 145 above but with 3x 2.5 sq mm (Nominal area) FRLS PVC insulated unseathed and stranded copper wire conductor cable (phase ,neutral and earth wire) for 15 Amp power point complete all as specified and directed.

S & F of Modular switch 6 Amp, 1 way, 1 module size complete all as specified and directed.

S & F of Modular switch 16 Amp, 1 way, 1 module size with indicator lamp complete all as specified and directed.

S & F of modular socket two-in-one, 6 Amp universal type, 02 module size complete all as specified and directed.

S & F of modular Socket, 16 Amp, multipurpose shutter type, 02 module size complete all as specified and directed.

Supply and fixing of Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as specified and directed.

Supply and fixing of PLUTO FLAT PANEL (High Lumen) 34 watt LED 6000K Ultra modren compact surface luminaire suitable for armstrong /grid /POP ceiling complete with electronic driver & high brightness SMD LEDs fixture size 595X595mm complete all as specified and directed. Make: Havells Cat Part No: LHEDRP7PK1W034 or equivalent in Philips/ Bajaj/ Crompton Greaves/ C&S Electric/ Halonix/ Polycab

M&L for earthing complete with GI earth plate electrode of size 600mmx600mmx6mm buried directly in ground vertically at a depth not 2.25 Mtr below normal ground level with top edge of earth plate at a depth not less than 1.5 Mtrs below normal ground level surrounded from all sides by 15 cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connection by using GI strip 32 x 6 mm by means of bolts, nuts, chuck nuts, and washers made of galvanized iron and protected by medium grade 50 mm dia GI pipe connected to main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1:2:4 B-1 ( including excavation and earth work, disposal of surplus soil two a distance not exc. 50 Mtrs) all as specified and shown on plate No 5 of SSR – Part I 1991 complete all as specified and directed. NOTE:- (a). PCC pit shall be provided at list 500 mm away from the earth pit and not just on the earth pit and extra cost of additional length of water pipe and fittings, junction, elbow etc shall be deemed to be included in the unit rate. (b). RCC pit cover shall be pre cast of RCC 1:2:4, type B-1, 80 mm thick reinforced with XPM weighing not less than 4 Kg/ Sq m in lieu of cast iron cover

S&F of celing fan 1200 mm sweep, BEE approved 5 star ratin energy efficient including blade canopy, down rod, regulator and connecting up including provision of three core flexible PVC FRLS cable with stranded copper conductor of size 0.75 sqmm from ceiling rose to connector of ceiling fan complete all as specified and directed.

A S CONSTRUCTION CO.

S GOURAV PRAKASH ENTERPRISES

LAXMI GROUP

M/S Ayub Khan

SHIVA ENTERPRISES

M/S Sunil Steel Works

SK Engineers