Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹10.3 LAdmitted-Finance | -31.25% | ₹10.3 L | L1 | Admitted-Finance |
| 2 | Rejected-Technical JODHPUR ROAD UTARLAI BARMER RAJ 344035 | BARMER | RAJASTHAN | 344035 | - | - | - | Rejected-Technical Reg Review Not Submit |
Tender Value
₹15.0 L
EMD Value
₹29,980
Closing Date
9 Mar 2026, 9:00 amClosed
EXECUTIVE ENGINEER UIT BHILWARA
EXECUTIVE ENGINEER UIT BHILWARA
Installation of Road safety items from Circuit House towards Gangapur Choraha on Chittor Road
2026_UITBH_542396_1
NIT-54/2025-26 UIT BHILWARA
Open Tender
Civil Works
90 days
BHILWARA
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
Secretary UIT, Bhilwara/MD RISL Jaipur
₹29,980
Yes
25 Mar 2026
26 Feb 2026
9 Mar 2026
26 Feb 2026
9 Mar 2026
26 Feb 2026
Providing and Fixing SPRING POST 750 MM with following Minimum specification The body of Spring Post should be Single moulded and made of special virgin flexible material PU (Polyurethane) in highly visible fluorescent orange colour Two or more bands of special Heat Transfer tape of a minimum 75 mm width should be pasted through Heat Transfer Pasting Technology around the Spring Post Special epoxy bond is used to fix the spring post with road surface. Springs/Rings should be molded in the Spring Post to ensure complete flexibility of the product. Holes of 10 mm dia should be provided on the base for better gripping on road. Dimensions of the spring post should be Height of the post 750 mm. Bottom Dia of the post 200 mm Pipe Di 75 mm Nails for fixing having 100 mm Length and 10 mm dia approx Weight of the Spring Post should be Miniumum 850 grams
Providing and fixing in position and true to line and level precast factory made fence/railing of approved make of M 30 grade 2.0 m high and 106 mm thick (1.50 meter long fence should have 6 nos vertical members & 3 Nos horizontal members) including providing 2 Nos 6mm dia reinforcement of approved brand in each member of fence shall be anchored to the ground at every 125mm as per approved drawing including placing, fixing at site complete as per direction of Engineer -in charge
Providing and fixing RUMBLE STRIP 21 MM with following Specifiction Technical Specifications: Rumble Strip should be made out of special PU (Poly Urethane) material. Dimension of one strip should be: Length: 500 mm Width: 125 mm Height: 21 mm approx. Weight of one strip should be 650 grams and 1300 grams per mtr approx It should have UV Stabilized so it doesn't fade or discolored even after long time. Rumble strip should be available In Yellow & black combination for better visibility from a long distance. Special epoxy bond should be used to fix the strip on the road surface. Rumble Strip should be tested for Material Identification for Poly Urethane (PU) as per ASTM D3418. Its UV Stabilized should be tested for 24 hours as per ASTM G154. Rumble Strip should be tested and pass for Load Capacity of 50 mt.
Supply fixing of Swiss type of Hazard marker, made out of 2 mm thick M.S. sheet size of box is 15x15 cm with hold fast at bottom, the body is painted in orange stoving enamel paint with white/high intensity grade micro-prismatic type sheeting, on all four side.
Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements.
Raised Payment Marker (Cats Eye): Supplying and Fixing of Molded Shank Raised Pavement Markers made of ABS Moulded body and Polycarbonate Reflective panels with Micro Prismatic Lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 35000 Kilogram tested in accordance to ASIM D 4280 & ASTM D 788. The Height of Road Stud is 20mm, Width 100mm, Length 100mm and minimum reflective area of 13 sqcm on each side.The Strength of detachment of the integrated cylender shank not less than 14+/-2mm (Thickness) and height not less than 30+ 2mm from the body. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive
Supply of ‘L’ type Bollard made out of 1.25 mm thick M.S. sheet height 134 cm, welded in circular type ring section having upper dia 15 cm. and lower dia 21 cm with another attachment of 15x15 cm circular section with 15 cm. face plate and hold fast at bottom, whole body is processed in white stoving enamel and red reflective 3 hands, each of 7.5 cm end one reflective sheet of 15 cm. dia provided to it complete in all respect.
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 2.71 MB
Tendernotice_2.pdf
PDF • 1.43 MB
Tendernotice_3.pdf
PDF • 0.23 MB
Tendernotice_4.pdf
PDF • 3.92 MB
Tendernotice_5.pdf
PDF • 0.92 MB
Tendernotice_6.pdf
PDF • 0.13 MB
BOQ_966885.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid