REPAIR REPLACEMENT OF PERIMETER LIGHTS STREET LIGHT SOLAR LIGHT AND CONTROL SYSTEM AT ABHIMANYU FODC NBCD HARD TUNIR TECHNICAL AREA STATION MESS ANEX MESS DSC TUNIR AREA AND PEERBABA STREET LIGHTS OTHER UNIT AT NAVAL STATION KARANJA

Amount

Notes : (i) The work consists of 01 job as under:- JOB (A) : TPP 2024-2025 Ser No. 81 (ii) Please refer schedule 'A' notes before quoting the tender. (iii) Amount of Schedule of Credit shall be deducted off line by the department. ITEMS FOR JOB 'A'

Note :- The rate quoted is inclusive for the following :- (i) (a) Attending minor repairs/breakdowns without involving any new (major) materials. (b) Cost includes the tools for attending break down and minor materials like lugs and PVC tapes,Job Cards and Complaint registers etc. (c) Major repairs,Break downs invloving S&F of materials such as cables,Joints,MCCBs etc are out side the scope of this item and shall be measured and paid separately. (d) Contractor should ensure to carry out the work through qualified Technician/Electrician and assisted by the helper. Necessary tools & plants and transportation charges are deemed to be included in the unit rate quoted.

Taking down and dismantling existing street light /flood light/ high mast/ Solar light fitting any type any wattage complete all as specified and directed.

Taking out cable loop after necessary excavation , cutting the burnt out damage end of cable ,refixing the cable providing suitable size of brass cable gland and aluminium lugs complete with all necessary connection with the existing system and refilling of excavated soil making finishing with the existing ground surface complete all as specified and directed for the following sizes:-

2/3.5/4 core 4 to16 Sqmm

3.5/4 core 25 to 35 Sqmm

3.5 core 50 Sqmm

3.5 core 70 to 95 Sqmm

M&L for checking & serviceability Street lights/flood lights/tower lights/highmast lights etc and found unserviceability during checking as per directed by department ,rectification of fault of Street lights/flood lights/tower lights/high mast lights etc by deploying resource with all tools & plants, telescopic ladder, gaskets safety arrangements and including providing minor materials like insulation tap insulation tap/wire connecter/repairing of junction box with lugs/nut bolts etc by contractor to make light serviceable within same day after receving complaint from department complete all as specified and directed. .(Notes:-Each Job shall consist of 8-10 number of complaints )

S&F in repairs Driver for LED lights as per existing make for the following capacity complete all as specified and directed :-

Driver for 70/72watts LED

Driver for 90 watts LED

Driver for 120-150 Watts LED

Driver for 180-200 Watts LED

Supply, fixing, connecting and testing in replacement integral LED flood light fitting, 60 watts energy saving & environmental friendly long life versatile pressure die cast aluminium body with clear toughened glass with over voltage protection,short circuit protection ,open circuit protection ,4KV in built and 10 KV external surge protection ,LED CCT is 5700 K and IP-66 as light source suitable making connection with three core PVC insulated and sheathed copper conductor cable of size 1.5/2.5 Sqmm complete all as specified and directed .

Supply, fixing, connecting and testing in replacement integral LED flood light fitting, 72 watts energy saving & environmental friendly long life versatile pressure die cast aluminium body with clear toughened glass with over voltage protection,short circuit protection ,open circuit protection ,4KV in built and 10 KV external surge protection,cLED CCT is 5700K as light source suitable making connection with three core PVC insulated and sheathed copper conductor cable of size 1.5/2.5 Sqmm complete all as specified and directed .

Supply, fixing, connecting and testing in replacement integral LED flood light fitting, 90 watts energy saving & environmental friendly long life versatile pressure die cast aluminium body with clear toughened glass with over voltage protection,short circuit protection ,open circuit protection ,4KV in built and 10 KV external surge protection ,LED CCT is 5700 K and IP-66 as light source suitable making connection with three core PVC insulated and sheathed copper conductor cable of size 1.5/2.5 Sqmm complete all as specified and directed .

Supply, fixing, connecting and testing in replacement integral LED flood light fitting, 120 watts energy saving & environmental friendly long life versatile pressure die cast aluminium body with clear toughened glass,individual LEDs with secondary lens optics with IP66 ingress protection ,over voltage protection,short circuit protection ,open circuit protection ,4KV in built and 10 KV external surge protection,LED CCT is 5700 K as light source suitable making connection with three core PVC insulated and sheathed copper conductor cable of size 1.5/2.5 Sqmm complete all as specified and directed .

Supply, fixing, connecting and testing in replacement integral LED flood light fitting, 30 watts energy saving & environmental friendly long life versatile pressure die cast aluminium body with clear toughened glass,individual LEDs with secondary lens optics with IP66 ingress protection , over voltage protection,short circuit protection ,open circuit protection ,4KV in built and 10 KV external surge protection,LED CCT is 5700 K as light source suitable making connection with three core PVC insulated and sheathed copper conductor cable of size 1.5/2.5 Sqmm complete all as specified and directed .

Supply, fixing, connecting and testing in replacement integral LED flood light fitting, 80 watts energy saving & environmental friendly long life versatile pressure die cast aluminium body with clear toughened glass , individual LEDs with secondary lens optics with IP66 ingress protection ,over voltage protection,short circuit protection ,open circuit protection ,4KV in built and 10 KV external surge protection ,LED CCT is 5700 K as light source suitable making connection with three core PVC insulated and sheathed copper conductor cable of size 1.5/2.5 Sqmm complete all as specified and directed .

Supply, fixing, connecting and testing in replacement integral LED Street light fitting, 120 watts energy saving & environmental friendly long life versatile pressure die cast aluminium body with clear toughened glass with over voltage protection,short circuit protection ,open circuit protection ,4KV in built and 10 KV external surge protection,LED CCT is 5700 K and IP-66 as light source suitable making connection with three core PVC insulated and sheathed copper conductor cable of size 1.5/2.5 Sqmm complete all as specified and directed .

Supply, fixing, connecting and testing in replacement integral LED Street light fitting,150 watts energy saving & environmental friendly long life versatile pressure die cast aluminium body with clear toughened glass , individual LEDs with secondary lens optics with IP66 ingress protection ,over voltage protection,short circuit protection ,open circuit protection ,4KV in built and 10 KV external surge protection ,LED CCT is 5700 K as light source suitable making connection with three core PVC insulated and sheathed copper conductor cable of size 1.5/2.5 Sqmm complete all as specified and directed .

Supply, fixing, connecting and testing in replacement integral LED Street light fitting, 180 watts energy saving & environmental friendly long life versatilepressure die cast aluminium body with clear toughened glass , individual LEDs with secondary lens optics with IP66 ingress protection, over voltage protection,short circuit protection ,open circuit protection ,4KV in built and 10 KV external surge protection ,LED CCT is 5700 K as light source suitable making connection with three core PVC insulated and sheathed copper conductor cable of size 1.5/2.5 Sqmm complete all as specified and directed .

M&L for preparation of old painted surfaces of steel tubular pole/strut, of any description and in any position 9.00/8.50 Mtr height and scrapping of pole with emery paper and M&L for applying two coats of aluminium paint on all the metallic surfaces including protection pipe,clamps, GI pipe bracket of street/security light, and pasting reflector tape 3 differnt colour for around the pole with & including applying one coat of white wash on coping of pole and numbering of street poles alongwith Sub station name complete all as specified and directed.

M&L for preparation of old painted surfaces of PCC pole of any description and in any position 9.00/8.50 Mtr height and scrapping of pole and M&L for applying two coats of cement paint on PCC surfaces and applying two coat of aluminium paint on all the metallic surfaces including protection pipe,clamps, GI pipe bracket of security light, and pasting reflector tape 3 differnt colour for around the pole with & including applying one coat of white wash on coping of pole and numbering of street poles alongwith Sub station complete all as specified and directed.

S&F 2.5 sqmm FRLSH PVC insulated single core unsheathed industrial multistrand cable with flame retardent low smoke (FRLSH) properties with flexible bright annealed bare copper conductor for voltage grade upto 1100 V confirming to IS-694:2010 complete all as specified and directed.

Supply ,Laying, jointing, connecting & testing XLPE/PVC insulated PVC sheathed cable heavy duty 1100 volts grade, aluminum conductor in trenches / pipe ducts of following sizes incl taking out cable any size complete all as specified and directed

2 core 6 Sqmm

4 core 10 Sqmm

4 core 16 Sqmm

3.5 core 25 Sqmm

3.5 core 50 Sqmm

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr depth and getting out in any type of soil complete all as specified and directed.

Returning, filling in, including spreading, levelling watering and well ramming in layers n.exc 25cm complete all as specified & directed.

Removing excavated materials to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the Starting point complete all as specified and directed.

S&F in repairs MS nut bolts,SS nut bolts ,clamp ,screw of different size and sample complete all as specified and directed.

S&F 63 mm outer dia ,double wall corrugated (DWC) duct pipe conforming to IS 16205 (Part 24) with antirodent and non flame propogating properties of approved colour complete with fittings for cable protection complete all as specified and directed.

Supply and erection of steel tubular swaged pole 410 SP 22, 8.5 Mtr long ,swan neck complete with cast iron base plate, finial Taper plug, bolts, nuts, and screws as specified type conforming to IS 2713 complete with & including 2 coats of aluminium paint over one coat of red oxide zinc chrome primer on external exposed surfaces and 2 coats of black bituminous paint on portion embedded in concrete in internal surfaces of pole including taking out old pole, complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40 mm gradded stone aggregates as in foundation of pole complete all as specified &directed.

M&L for PCC type B-1, 1:2:4 using (20 mm gradded stone aggregate) as in coping, including form work complete all as specified & directed.

M&L for repair of high mast pole of 16 Mtr including servicing of gear box ,servicing of motor and connected accessories complete all as specified and as directed

S&F 10 mm galvanised steel wire rope multi stranded complete all as specified and as directed

S&F Cable Junction Boxes IP 66 ,weather proof, for outdoor installation of size 155 mm x210 mmx92 mm complete with electrolytic aluminum bus bar suitable cable size 10-16 sqmm for 3 phase and neutral fixed on ebonite insulator and one DP 6-32 A complete all as specified and directed.

M&L for relaying of LT UG cable of following sizes including sand filling, laying of cable cover and filling of soil complete all as specified and directed.

2/3.5/4 core 10 to 25 sqmm

2/3.5/4 core 35 to 70 Sqmm

S&F in repair bracket for street light fittings made out of 40 mm bore light grade GI tubing 1.5 m long bent to shape inculding fabrication work ,clamp ,nut & bolts and applying two coats of aluminium paint over a coat of red oxide zinc chrome primer repair all as specified and directed.

S&F in repairs street light bracket 1.5 mtr long made out of 50mm dia light grade GI tube duly welded with 100mm dia 30 cm long GI tube including provision of 4 Nos holes duly threaded for fixing the bracket on the top of existing poles with complete including arrangment of threding and weldeding work required for fixing of street light fitting complete bracket all as specified and directed.

Supply, fixing, connecting and testing in replacement integral LED flood light fitting, 150 watts energy saving & environmental friendly long life versatile pressure die cast aluminium body with clear toughened glass,individual LEDs with secondary lens optics with IP66 ingress protection ,over voltage protection,short circuit protection ,open circuit protection ,surge protection,LED CCT is 3000 K as light source suitable making connection with three core PVC insulated and sheathed copper conductor cable of size 1.5/2.5 Sqmm complete all as specified and directed .

M&L for DP of 6-32 A ,240 V with breaking capacity 10 KA Conforming to IS/IEC 60898-1:2015 all as specified and directed.

S&F connector strip terminal for octagonal pole including dismantling from cable/wire & taking out unservicable connector strip including nuts and bolts complete all as specified and directed.

M.K Enterprises (BID ID -3099630)

R A Electric Co. (BID ID -3098279)

Sagar Electricals (BID ID -3101778)

pk Enterprises (BID ID -3099160)

shree arihant constrution (BID ID -3099033)

D.N.PATIL (BID ID -3097415)