Annual repair to residential Qrs. Type-MA, MB, M-II and M-III Colony at Madhuban area for the year 2025-26

Dismantling & removing the old damaged following item of works as per the requirement at site including scaffolding, disposing the same at specified place within all leads and lifts including supplying of all labour, T&P etc all complete as per the direction of Engineer-in-charge. (Excluding cost of GST) For all floors

Plaster

A.S Flooring

Brick work

graded concrete

RCC ( dismantling of water tank roof, outside chajja,column,beam etc)

Brick work in Fly Ash Bricks of size 25cmx 12cm x 8cm and having crushing strength not less than 75 Kg/Cm² to 99Kg/Cm² with C.M (1:6) including splay/cutting, racking out the joints curing, hoisting, staging at any height with cost and supply of all materials, labour,T&P, taxes, royalties, transportation charges, curing, testing charges etc. all complete but excluding GST as per direction of Engineer-in-charge. ( For all Floors ) ( For parapet, water tank wall, balcony etc)

12 mm thick Cement plaster with cement mortar (1:6) proportion, over brick work including racking out the joints, finished smooth to the exposed surface, rounding the corners wherever found necessary including cost & supply of all materials, labour, T&P,staging, scaffolding, watering, curing, taxes, tollage, royalties, etc. complete but excluding GST as per direction of Engineer-in-charge. ( For all Floors ) ( For water tank roof, outside chajja,column,beam,fin etc)

12mm.thick polymer plaster with CM(1:4) to roof ceiling balcony drops, other R.C.C. surfaces with using “SIKA RUSTOFF” and “SIKA LATEX”, “SIKA HIGH BOND” or equivalent chemicals including scaffolding, curing, etc. as per direction of Engineer-in-charge (All floors) Excluding cost of GST. ( For water tank roof, outside chajja,column,beam,fin etc)

25mm. thick A.S. flooring in cement concrete (1:2:4) at all floors & levels using 12mm. and down grade hard granite chips of approved quality including mixing, hoisting, laying, consolidating, curing, by water tanker, finished smooth to the exposed surface with a floating coat of cement punning, rounding the corners where found necessary including cost of supply of all materials, labour, T&P, taxes, tollage, royalties, transportation charges, etc. complete & as per direction of Engineer-in-charge.(Excluding GST)

Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymer having sun reflective index (SRI) of

Supplying of 110mmΦ PVC pipe(ISI make) with all fittings of required length including removing /dismantling the damaged/broken portion of pipe & fixing the same in position with PVC clamp, bobbin, brackets with leak proof joints, etc with supply of all labour, T&P, etc. as directed by Engineer-in-charge.(Excluding GST) ( For all Floors )

Cement concrete (1:11/2 :3)) using 12mm to 20mm size C.B.G. chips for all floors,foundation & plinth etc. of approved quality mixing, hoisting,laying, compacting, scaffolding , curing with cost and supply of all materials, labour,T&P, taxes, tollage, royalties, etc. all complete but excluding GST as directed by Engineer-in-charge. ( For all Floors ) ( For water tank roof, outside chajja,column,beam,fin etc)( special nature of work)

Providing rigid smooth leak proof centering & shuttering made of steel/ply, plank of approved quality for R.C.C. structures, staging and deshuttering and removing the same after due period with supply of all materials, labour, T&P, taxes, royalties, tollage, etc. all complete but excluding GST as directed by Engineer-in-charge. ( For all Floors ) ( For water tank roof, outside chajja,column,beam,fin etc)

Supply TMT rebar of minimum grade Fe-500 confirming to IS-1786 including cutting, straightening, bending,binding & placing the grills in position for RCC works binding the grills with binding wire of 18 to 20 gauge including supply of steel, labour,materials, transportation charges, T&P, taxes, etc. all complete but excluding GST as per the direction of Engineer-in-charge. (NB: No payment shall be made for extra weight than theoretical co-efficient). ( For all Floors )

Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead with supply of all labour, T&P,staging, scaffolding, etc. complete cleaning the debrises with all taxes,including leads & lifts transportation & disposing at specified place and as per direction of Engineer-in-charge.(Excluding GST). ( For all Floors )

Taking out the Door and Window shutters and refixing them including screws as may be required etc. complete as directed by Engineer-in-charge (Excluding GST). ( For all Floors )

Window

Repairing of old damaged door/window Supply of 32mm thick seasoned Non-Sal/Hard wood paneled Door/window shutters as is where required having both side styled moulded having bottom rail of 200 mm thick,top rail 100mm thick , middle lock rail 200 mm thick alongwith straight vertical moulded style of 125mm width (total 2 panels) and panel should be 20 mm thick piasal plank embedded 16mm to styles & rails with one no of aluminum aldrop of size 300mm x 16mm x 40mm, two nos of 150 mm with 175mm x 40mm flat aluminum handles, 2 nos. of 200 mm x 10mm aluminum tower bolts and required numbers of wooden hinged cleats, fixing at position etc all complete . including cost of all materials, labour, loading & unloading Charges, all taxes, transportation charges, stacking at site store etc. all complete as directed by Engineer In-Charge.(Excluding GST) ( For all Floors )

Suplying, fitting & fixing of Mosquito proof net ( Netlon ) of approved quality for window & ventilator after removing the damaged nets , changing with new net fixed to proper position by stiching male female velcro tape all complete including removing of existing old damaged frame from position,all complete including cost & supply of all materials, nail, labour, T&P, taxes, transportation, removing the existing old frames from position etc. as per direction of Engineer- in- charge.Excluding GST. ( For all Floors )

Supplying, fitting, fixing of Mosquito proof net door shutter made out of seasoned piasal wood (32mm X 75mm Size) batten for style, top rail, bottom rail, lock rail with mosquito proof net ( plasto net 20mm X 20mm square mesh )/ (Netlon insect screens 20mm X 20mm square mesh) of approved quality , make with wooden beading ,nail and fixed the new frames with all aluminium Handles, tower bolts, stainless steel hinges of approved size, quality etc. all complete including cost & supply of all materials, nail, labour, T&P, taxes, transportation, removing the existing old frames from position etc. as per direction of Engineer- in- charge.Excluding GST. ( For all Floors )

Supplying R.C.C. door /window frames of cross section 100mm X60mm of m-25 concrete using OPC-43 Grade cement and steel reinforcement of 5.5mm to 6mm dia M.S Rod with provision of hinges,locks,W.I.Clamps.etc all complete as directed by E.I.C,Excluding GST.

Labour charges for fitting & fixing of DOOR frame clamps with supply of all labour, T&P, taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST)

Supplying, fitting, fixing Sal wood frame choukaths for doors, windows,ventilators,coaltaring two coats to wall side face of frame, fixing to position with required nos. of W.I. clamps of size 25cm to 30cm long,35mm wide, 2mm to 3 mm thick in C.C(1:3:6) including cutting grooves in choukaths, jointing with adhesive solution fixing to proper position etc. all complete including cost and supply of all materials, labour, T&P,all taxes, transportation, staging, scaffolding etc. complete as directed by the Engineer-in-charge..(Excluding GST). ( For all Floors ) NB: Without painting.

Supplying, fitting, fixing up AL window (sliding type) made up aluminum Section 9778 as window fram, section No. 4095, 4096 & 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber bending including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer in charge. Excluding GST. ( For all Floors )

Supplying, fitting & fixing of WPC door and window frames of size( 50x70mm) of 0.75 density with all fittings and fixtures with stainless steel including cost of loading & un-loading charges, with supply of all labour, materials like hinges, T&P, all taxes, transportation, etc. all lead and lift complete as per direction of Engineer-in-charge (Excluding cost of GST)

Supplying fitting and fixing of 25mm thick WPC door shutter of 0.55 density with all fittings and fixtures with stainless steel including cost of loading & un-loading charges, with supply of all labour, materials like hinges, tower bolt, handle, aldrop etc. T&P, all taxes, transportation, all lead and lift etc. complete as per direction of Engineer-in-charge (Excludicng cost of GST) ,

Supplying of following items of ISI mark & specification including cost and supply of all materials , transportation charges, deposit the same in departmental store if required etc all complete as per the direction of Engineer-in-charge(Excluding GST)

12mm. BWR Ply Wood

19mm. BWR Ply Wood

6mm. BWR Ply Wood

9mm. BWR Ply Wood

Aluminium Handle 125mm.

Aluminium Handle 100mm.

Aluminium Tower bolt barrel type (150mm X 10mm).

Aluminium Tower bolt barrel type (100mm X 10mm).

Aluminium Aldrop (15mm X 300mm long).

Aluminium Hinges (125mm. X 75mm. X 4mm.).

Aluminium Hinges (100mm. X 50mm. X 4mm.).

Aluminium Hinges (75mm. X 63mm. X 4mm.).

Aluminium Hinges (50mm. X 35mm. X 3.2mm.).

Aluminium 300 X 16mm. Stainless Steel Aldrop (Stapple).

Wood primer.

Red Oxide primer.

Enamel paint.

Thinner

Wair nail (1/2" to 6").

Stainless butt hinges (75mm. X 47mm. X 0.70mm).

Fevicol.

5mm. Thick plain / frosted colour glass.

Cement.

Sweet Sand.

Oxidised Mild Steel screws 50mm.

Oxidised Mild Steel screws 40mm.

Oxidised Mild Steel screws 30mm.

Oxidised Mild Steel screws 25mm.

Oxidised Mild Steel screws 20mm.

Latex(Synthetic Rubber Emulsion)

Epoxy Bonding Agent

Supplying, fitting, fixing of MS welded grills, fabricated with I.S.A , M.S flat, welded to approved design, size, fixed to position with screws, nails and grouting to walls in C.C (1:2:4) including cutting grooves in walls and making good the damages with cost and supply of all materials, labour, T&P, taxes, transportation, welding charges , grinding, staging, scaffolding, curing etc. all complete as per the direction of Engineer in charge.(Excluding GST). ( For all Floors )

Distempering of approved quality and shade to old work including supplying cleaning, brushing, the old paint, removing the flakes and finishing smooth the wall surface by applying plaster of paris or wall putty where required, sand papering including cost & supply of all material labours, T&P scaffoldings, taxes etc. complete but excluding cost of GST as directed by the Engineer in charge. ( For all Floors )

one coat

two coats

Painting one coat with approved quality & shade enamel wood paint on old wood work over one coat of primer including scraping, cleaning, the old paint surface sand papering, filling the holes with wax putty etc. all complete including cost and supply of all materials,labour, T&P, all taxes, transportation charges, staging, scaffolding, etc. all complete but excluding GST as per direction of Engineer-in-charge. ( For all Floors )

Providing & fixing of 32mm thick factory made paneled hard wood door,windows, made out of duly seasoned & treated hard woods. The Styles, Rails & Intermediate rails are kiln seasoned as per IS-1141, ASCU Chemically pressure treated as per IS-401, Panels are also seasoned and chemically pressure treated made out of hard wod as per IS-1003/Part-I & II . Necessary fitting & Fixtures to fix the shutters inposition with Screws of stainless steel et. with cost of loading & un-loading stacking at departmental stores including dismantalling the damaged shutters and depositing the old/damaged/dismantted shutter at section office with supply of all labour, materilas ,T &P, all taxes, transportation, etc. complete as per direction of Engineer-in-charge.(Excluding GST) ( For all Floors )

Scrapping old paint, heavy moss with scraper, coir brush and sand paper, then washing cleaning the exterior wall surface with soap/soda water using adequate capacity of water tanker, pump set and drying the surface followed by one or more coats of biowash at at any height including all cost & supply of materials, hire and running charges of water tanker, pump set, labours, T&P, taxes, all transportation, staging, scaffoldings, water charges etc. complete for all floors as directed by the Engineer-in-charge.( Excluding the cost of GST)

Painting two coats with acrylic based weather coat to exterior wall surface with approve quality and shade by brush go give an even surface including scaffolding, scrapping, cleaning the surface with supply of all labour materials T&P taxes, etc. complete as directed by Engineer-in-charge (Excluding cost of GST) .

Skilled labour ( Carpenter & Mason)

Un-Skilled labour ( helper)