82538 PROVISION OF STORAGE ACCN FOR FURNITURE YARD AT AVADI UNDER AGE (I) CHENNAI

Amount

GENERAL SUMMARY NOTE: Schedule ‘A’ Part - I to VII are prepriced by MES under Ser No. 2.00 to 8.00. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Lumpsum price worked out by the contractor for “BUILDINGS / STRUCTURES ” as listed in Schedule ‘A’ Part - I , on Serial Page No.24

Lumpsum price worked out by the tenderer for "SITE CLEARANCE" as listed in Schedule ‘A’ Part-II on Serial Page No.25

Lumpsum price worked out by the tenderer for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III on Serial Page No.27

Lumpsum price worked out by the tenderer for "ROAD/PATH/CULVERT" as listed in Schedule ‘A’ Part-IV on Serial Page No.28

Lumpsum price worked out by the tenderer for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-V on Serial Page No.29

Lumpsum price worked out by the tenderer for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-VI on Serial Page No.31

Lumpsum price worked out by the tenderer for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-VII on Serial Page No.33

Subtotal

NOTE: Schedule ‘A’ Part - VIII is not prepriced by MES and prepriced rate indicated as 0.00 under Col.5 signifies this fact only. Bidder shall insert their rates in Green colour filled under Col-6.

SCHEDULE "A" PART - VIII MISCELLANEOUS ITEMS M & L for concealed point wiring using 1.1 kV grade single core FR-LSH flexible cable, conforming to IS 694: 2010, having multi-drawn thin strands of electrolytic copper conductors and insulation for phase, neutral, and earth continuity conductor connecting to earth dolly, colour-coded as per IS 11353: 1985, drawn in medium grade UPVC surface / recessed conduits, conforming to IS 9537 (Part- 3): 1983, of size not less than 20 mm NB, including cutting chases, factory made not less than 1.2 mm thick sunken, modular flush sheet galvanized metal enclosure having zinc coating not less than 120 GSM, , conforming to IS 14772: 2000, having top, bottom, side and back-wall knockouts for conduit entry from any direction, suitable modular cover-plates and making good of disturbed surfaces of wall / ceiling / floor, etc. complete all as specified in IS 732: 2019 and directed by the engineer-in-charge for the following items:-

(a) One light point controlled by one switch, with cables 1.5 sqmm size

(b) One fan point controlled by one switch, with cables 1.5 sqmm size

(C) One 5A socket outlet, independent, with cables 1.5 sqmm size

(d) One 6 A socket outlet, on the same board with other switches, with cables 1.5 sqmm size

All as per Item No. 11, but 4 Sqmm size copper conductor cable FRLSH and 4 Sqmm copper earth wire cable FRLSH drawn through not less than 20 mm dia UPVC conduit including provision of conduit and conduit accessories for 5/16 Amps Multi purpose switch socket combination on independent board complete all specified and as directed.

M & L for submain wiring using 1.1 kV grade single core FR-LSH flexible cable conforming to IS 694: 2010, having multi-drawn thin strands of 4.0 mm² electrolytic copper conductors and insulation for phase, neutral and earth continuity conductor connecting to earth dolly, colour-coded as per IS 11353: 1985, drawn in medium grade UPVC surface / recessed conduits, conforming to IS 9537 (Part- 3): 1983, of size not less than 25 mm NB, including making good of disturbed surfaces of wall / ceiling / floor all complete as specified in IS 732: 2019 and directed by engineer-in-charge. Note:- [i] Phase & neutral conductors (02 runs), earth continuity conductor (01 run) and surface / recessed conduit (01 run) shall be measured combined as one length.

Supply and fix MCB SP 5-32 A , B curve including , Disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit/deposite in MES store yard complete all as specified and as directed.

Supply and fix MCB SPN 32/40 A , B curve including , Disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit/deposite in MES store yard complete all as specified and as directed.

Supply and Fix wall mounted LED batten with decorative end cap of capacity 4feet 20W or nearest higher wattage, 2500 lm, 6500 K suitable for Surface, Wall & Conduit mounting complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and lamp complete all as specified and directed internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. (Make : Bajaj, model: Cat Part No. BCLSB 20 WH or equivalent as mentioned in PS)

Supply and fix LED light fitting 2 feet,10 W or nearest higher wattage,230v,suitable for Surface, Wall & Conduit mounting,with extrunded aluminium housing,with integrated LED driver, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. (Make :Bajaj,Model :Cat Part No BCLSB 10 WH or or equivalent as mentioned in PS)

Supply and fix LED Street light fiiting 60 W LED complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, including necessary suitable clamps & dismantling from position unserviceable light for taking into credit/deposite in MES store yard complete all as specified and as directed. (Make : Crompton LSTS-60-CDL-M or equivalent in as mentioned in PS)

Supply and fix 25/32/40 mm dia light grade GI tube bracket of length 1.2 metre bend to required shape including MS clamp made out of 30 mm x 6 mm MS flat iron and fix on poles/wall with necessary GI bolts, nuts and washers - 2 sets for each fittings including two coat of aluminimum paint over a coat of primer complete set all as specified and directed.

Material and labour for Earthing complete with using galvanised steel earth plate electrode of size 600mm x 600mm x 6 mm thick buried directly underground vertically (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate at a depth not less than 1.5m below ground level connected with and incl galvanised iron strip 32 x 6 mm by means of GI bolts and nuts,check nuts,washers and GI earth strip protected by GI pipe light grade 40 mm bore upto 7.5 mtr and connecting to earth terminal/ test point etc as per site requirement including necessary excavation, earth work in any type of soil PCC (1:3:6) type C1 chamber and 40 mm thick RCC Cover with 6 mm dia MS bars 10 cm C/C on both ways as reinforcement complete all as shown in electrical plate No. 3 of MES Schedule Part 1 including watering pipe 20 mm dia medium grade with funnel and with mesh , refiling soil all as specified. Note:(i) Quoted rate deemend to include necessary earth work PCC chamber, RCC cover, reinforcement removal of surplus soil , site clearance etc. (ii) GI earth strip , GI tubing light grade upto 7.5m deemed to be included in the rate quoted by the contractor. (iii) Beyond 7.5 mtr the GI earth strip 32X6 mm & GI pipe light grade 40 mm dia shall be measured under relevant item of the schedule. (iv) Quotated rate include testing after completion from test point and the desired earth resistance shall be not more than 2 ohm .If the desired result is not obtained the earthing will be re done by the contractor at no extra cost.

S & F heavy duty exhaust fan, metal body, 230V, AC, 50 Hz, of size 300mm sweep 1400rpm with suitable louvers of appropriate size including fixing arrangement and making of holes and make good to distrubed surface match with existing surface complete all as specified and directed by Engineer-in-Charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed by engineer-in-charge.

Supply and fix in LED Street light fiiting 120 W LED complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, including necessary suitable clamps & dismantling from position unserviceable light for taking into credit/deposite in MES store yard complete all as specified and as directed. (Make : Crompton LSTS-120-CDL-M(Nexus Star Neo) or equivalent in as mentioned in PS)

Supply and fix pole mounting junction box (looping box) for street light with size of 230x170x105mm comprising of PVC connector and one MCB SP 6 A including mounting arrangement complete all as specified and as directed.

Cutting the existing bituminous road / cement concrete surface to the required width and depth for laying pipe lines and returning filling in, removal of surplus material making good PCC 1:2:4 complete and match with existing surface complete all as specified.

Material and labour for construction of RCC hume pipe septic tank designed to carry sewage and sluge water, inclding excavation in any type of soil/soft disintegrated rock,PCC 1:4:8 below foundation, vent shaft, connection etc for 10 user complete all as specified , as shown on drawing and as directed.

Material and labour for construction of soakage well of internal size of 3m dia and 4.5 m effective depth, including excavation in any type of soil/soft disintegrated rock, foundation in PCC 1:3:6,brick work in CM 1:4 for honeycombed walls and including intercepting chamber and screen chamber ,with top ring of M-25 grade concrete ,RCC cover slab in M-25/ SFRC cover, filling with brick bats etc, complete all as specified in drawing and as directed by Engr-in-charge.

JANANIKARTHIK ENTERPRISES

GV Foundations

kvs constructions

Sri Lakshmi and Company