REPAIRS TO BOUNDARY / SECURITY WALLS, FENCING, BARBED WIRE / CONCERTINA COIL AT ORC, BOLTON ROAD AND CAW UNDER GE (AF) HAKIMPET

Amount

Dismantling of Steel / RCC post including taking out embedded portion and making good disturbed ground complete in concrete, brick masonry etc, complete all as specified and directed.

Dismantling of expanded metal any thickness or mesh chainlink fencing of weight not exceeding` 4 Kg/Sqm, complete all as specified and directed.

M&L for Providing PCC1:4:8, type D2 (Using 40 mm graded crushed granite stone aggregate) as in foundation filling & mass concrete, complete all as specified and directed.

M&L for Providing PCC 1:3:6, type C2 (Using 40 mm graded crushed granite stone aggregate) as in columns posts etc, complete all as specified and directed.

M&L for Providing precast cement concrete 1:3:6, Type C1 blocks masonry with solid blocks exceeding 10 cm in width and set in CM 1:6, complete all as specified and directed.

Use and waste formwork to sides of concrete foundations, footings, sides and soffits of foundation and plinth beams, columns and similar work vertical or batter rough finished surface of concrete of that surfaces, complete all as specified and directed.

M&L for Providing cement concrete1:3:6, type C1 (Using 20 mm graded crushed granite stone aggregate) as in coping including weathering, slightly rounded or chamfered angle and throating , complete all as specified and directed.

S&F Mild steel square/rectangular Hallow sections/ flats in posts and struts in fencing including cutting tops to shape as directed drilling holes notching for wire etc flat iron fillets (for securing wire mesh etc) incl all necessary drilling, blocking or reveting etc., complete all as specified and directed.

Supply only chain link MS galvanised fencing any size or type n.exc 4 kg/Sqm, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standars, rails, straining bolts etc including provision of building wire, complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and 'scraved the other to be fitted with washers and one hexagonal or square nut not exceeding 5 cm long and dia 5 to 10 mm, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length bent to shape required, hooking, bending and binding with ms wire (anneled) not less than 0.90mm dia, complete all as specified and directed.

M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 is to be finished even and smooth without using extra cement, complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of walls and applying three coats of white wash, complete all as specified and directed.

M&L for preparing new plastered surfaces and applying three coats of cement base paint on surfaces of walls, complete all as specified and directed.

M&L for preparation of steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of Red oxide primer, complete all as specified and directed.

M&L for preparation of steel surfaces of any description not exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed.

M&L for Reinforcement cement concrete (Design mix) M-25 using 20 mm graded aggregate in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc., basement slabs, under rammed pils and mass concrete, complete all as specified and directed.

M&L for Reinforcement cement concrete (Design mix) M-25 (Using 20 mm graded crushed granite stone aggregate) in columns, pillars, piers, posts and struts, complete all as specified and directed.

Use and waste formwork to sides of pillars, posts, struts, piers, coloumns, and stanchions of square, rectangular or polygonal for fair finished surfaces, complete all as specified and directed.

S&F mild steel TMT bars, 5mm dia and over up to and including 10 mm dia , cut to length, bent to shape required incl cracking, bending spirally for hooping for columns, hooking ends, and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips as in stirrups, spacers and binders, complete all as specified and directed.

S&F rolled mild steel framed work as in doors or gates of angle or other sections with guest plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering, doors etc, to be prepared for hanging or sliding with and incl eighter hooks, and hinges, roller hinges, or steel hanging, door fittings, (Exclusive of steel sheeting or other civering, running rails, and guide) and hanging also fastering and fixing completes Fe-410-w (code-E-250) quality A, complete all as specified and directed.

S&F mild steel (Misc) work such as sliding bolts, clamps, hold fasts &similar work, complete all as specified and directed.

Demolition of brick work / stone boulder masonry built in cement mortar, complete all as specified and directed.

Demolition of pre cast concrete articles and pre cast concrete block walling, complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan exceeding 6m mean radius built in CM 1:6, complete all as specified and directed.

M&L for 40mm thick providing pre-cast cement concrete 1:2:4, type B0 (Using 12.50 mm graded crushed granite stone aggregate) louvers and jallies including all mouldings set in CM 1:4, complete all as specified and directed.

Taking down cement plaster on brick or stone etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for 15mm thick rendering fair faces of brick work (or) concrete surfaces in CM 1:6, complete all as specified and directed.

S&F in repairs, Concertina coils super barbed bladed profile of dia 600 mm of and wt of coil for 50 spiral turns shall not be less than 9.0 kg and one coil (50 spiral) shall not be stretched to more than 6.0 mt. blade shall be 0.50mm thick galvanised steel strip and 2.5mm dia core wire fixed to angle iron brackets or masonry surfaces with necessary accessories like straining wires, fixing clips etc, complete all as specified and directed.

Fixing in repairs of existing concertina coil fixed to angle iron brackets or masonry surfaces with necessary accessories like straining wires, fixing clips etc, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

S&F Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm barbs at 100mm spacing all as specified fixed in repair, complete all as specified and directed.

Fixing in repairs Restraining and resecuring including making good staples etc Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm barbs at 100mm spacing, complete all as specified and directed.

BSCPL Infrastrcture Limited

Allied Constructions