CERTAIN REPAIR TO KITCHENS/TOILETS, FLOORING, TILING, STARIS, STEPS WITH KOTA STONE PLINTH PROTECTION PLUMBING/SANITARY WORKS IN SMQS CAMP AREA AT AFS ADAMPUR

Amount

Demolition of PCC in ground floor & pavings n.exc 15 cm thickness below or above GL, complete all as specified and directed by Engineer-in-Charge.

40 mm thick PCC 1: 2: 4, type B-1, using 20 mm graded crushed stone aggregate as in flooring, surface finished even and smooth using extra cement complete, all as specified and directed by Engineer-in-Charge .

75 mm thick PCC 1: 3: 6, type C-1, using 20 mm graded crushed stone aggregate as in plinth protection, appron and similar works surface finished even and smooth without using extra cement complete, all as specified and directed by Engineer-in-Charge .

25mm thick PCC 1:2:4 type B 0 (using 12.5mm graded stone aggregate) as in sub base floor complete all as specified and as directed by Engineer-in-Charge

Demolition of PCC of any description and in any position other than ground floor exc 15 cm thickness complete all as specified and as directed by Engineer-in-Charge ( For sunken portion )

Taking down cement plaster of any description on brick walls or concrete surfaces etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed by the Engineer-In-Charge.

Rendering 15 mm thick on other than fair faces of brick wall finished fair & even in CM 1:6 complete all as specified and as directed by Engineer-in-Charge

15 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 on external surface of wall using WPC as per manufaturers instruction complete all as specified and as directed by Engineer-in-Charge Note: WPC shall be measured and paid seprately.

M & L for rendering 10 mm thick in CM 1:4 finished even and fair in patch works all as specified and directed by the Engr In Charge.

M & L for rendering 5 mm thick on brick or concrete surface of ceiling finished fair & even in CM 1:3 complete all as specified and as directed by Engineer-in-Charge

Supply only ISI marked integral water proofing compound. complete all as specified and as directed by Engineer-in-Charge

M & L preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling ,complete all as specified and as directed by Engineer-in-Charge

M & L preparation of newly plastered surfaces of wall and applying three coats of white wash ,complete all as specified and as directed by Engineer-in-Charge

M & L preparation of newly plastered surfaces of wall and applying two coats of OBD over a coat of putty filing including preparation of newly plastered surface of wall ,complete all as specified and as directed by Engineer-in-Charge

M & L for two coat of cement base paint over one coat of primer including preparation of newly plastered surface of wall all as specified and directed.

M & L for 15 mm thick rendering in CM 1:3 with using WPC as in sunken portion or roof top complete all as specified and as directed by Engineer-in-Charge (Note : The plastered surface will be tested by ponding test for 72 hours).

M & L for applying a tack coat of industrial bitumen 85/25 @ 1.20 kg per sqm including preparation of surface,complete all as specified and as directed by Engineer-in-Charge

M & L for LDPE sheet 150 micron thick laid over bitumen coat in sunken portion in single piece all as specified and directed by Engr In Charge.

M & L for cement concrete (1:5:10) type E2 using 40 mm graded aggregate as in filling and mass concrete complete all as specified and as directed by Engineer-in-Charge

S & F 40 mm dia tubes medium grade galvanised with all fitting and fixed as spout pipe and waste pipe all specified and directed by Engr In Charge.

Dismantling floor hearth and wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the permises.

M & L for 10 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 for backing coat of wall tiling etc. complete all as specified and as directed by Engineer-in-Charge

M & L 15mm thick screed bed in CM (1:6) for laying of tiles etc, complete all as specified and as directed by Engineer-in-Charge

M&L glazed ceramic coloured tiles 300 x 200 x 7mm thick coloured on vertical surfaces such as skirting dados etc, set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and as directed by Engineer-in-Charge

M&L non skid coloured ceramic floor tiles 7- 8 mm thick (square/rectangular) area of each tiles exc. 0.06 sqm but not exc. 0.11 sqm, in floors etc set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and as directed by Engineer-in-Charge

S&F 7-8 mm thick non skid ceramic coloured tiles of size exceeding .18 sqm but n exc 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match, laid over cement screed bed or bedding layer complete all as specified and directed by Engineer-n-Charge (colour of tiles shall be as approved by GE).

M&L Granite (of any type) work, 20 mm thick (Table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateforms and like in cement mortar 1:4, including pointing in white cement 1:2, using marble dust with admixture of pigment to match with marble shade of Granite including half moulding of granite edges complete all as specified and as directed by Engineer-in-Charge

M&L Granite (of any type) work, 20 mm thick (Table rubbed and polished) for wall lining (veneering to wall)12mm thick in cement mortar (1:3)and pointing with white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Granite complete all as specified and as directed by Engineer-in-Charge

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engineer-in-Charge

M & L for RCC 1:1 1/2:3 type A1 using crushed stone agg in chajjas/Cooking shelves/plateform and similar works including 5 mm thick renderring in CM 1:3 finished even and smooth without using extra cement to the surface in contect with from surface complete all as specified and directed by Engineer-in-Charge including form works.

S & F TMT bar 10 mm dia and over cut to length bend to shape reqd including cranking bending sprially for hooping for ends and binding with and incl MS wire annealed not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge

M & L for repairing RCC Chajjas roof facia projection and similar work by necessary preparation scraping cutting cheiselling derusting and cleaning exposed reinforcement surfaces of damaged loose RCC With cement concrete 1:1.5:3 using 20 mm graded agg and reinforced with welded mesh of weight 2 kg per sqm but n exe 3 kg per sqm with or without facia and finished with cement and sand mortar 1:3 using coarse sand , thickness of member n exe 100 mm and area n exe 0.5 sqm and finished the surfaces with two coat of cement based paint to match the shade with the existing surfaces all as specified and directed by Engineer-in-Charge .

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including S&F trap set complete all as specified and as directed by Engineer-in-Charge

S&F Vitreous china wash down water closet pan (pedestal pattern) of white including fixing bolts connection to trap & to flush pipe fixed in repairs complete all as directed by Engineer-in-Charge .

S&F in repairs PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and incl ball valve float & handle, waste pipe & brackets complete set complete all as specified and as directed by Engineer-in-Charge

S & Fixing in repairs Vitreous China wash basin, angle back, size 540x450mm white, including waste pipes connection to existing pipe and tap including brackets

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engineer-in-Charge

S&F in repairs concealed stop cock fancy type CP with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and as directed by Engineer-in-Charge

All as per item No 39 above but angle cock type complete all as specified and as directed by Engineer-in-Charge

S&F in repairs stop cock fancy type with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and as directed by Engineer-in-Charge

S&F in repairs gun metal globs or gate valves with iron wheel head screwed both ends for iron pipe and fixed of size 15mm bore. complete all as specified and as directed by Engineer-in-Charge

S&F in repairs bib tap, cast copper alloy with capstan head, CP fancy type with long body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and as directed by Engineer-in-Charge

S&F in repairs 15 mm dia, PVC bib taps, standard of PTMT, any colour, screwed for iron pipe and fixed in repairs (minimum weight 45 gms) complete all as directed by Engineer-in-Charge .

S&F in repairs Pillar taps fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed Engineer-in-Charge . .

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600 mm, complete all as specified and as directed by Engineer-in-Charge .

S&F in repairs Steel plate rack made of stainless steel 1 mm thick over all size 600mm x 750mm complete, all as directed by Engineer-in-Charge .

S&F in repairs Acrylic toilet cabinet with shelves 425mm x 350 mm x 100mm size, with shutter complete all as specified and as directed by Engineer-in-Charge by Engineer-in-charge.

S&F in repairs Sheet glass Shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed by Engineer-in-Charge

S&F Brass chromium plated shower rose 125 mm size with or without swivel joints with arm fixed in repairs to steel pipes of 15 mm bore complete, all as specified and directed by Engineer-in-Charge .

S&F in repairs Plastic water closet seat cover white, closed pattern with flat bottom and mild steel chromium plated or aluminized hinging device complete all as directed by Engineer-in-Charge .

S&F in repairs Centre hole mixture pillar mounted tap of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts fancy type screwed for iron pipe, fixed as in repairs, complete all as directed by Engineer-in-Charge .

S&F 32mm dia PVC waste pipe for WHB, or Urinal fixed in repairs, complete, all as directed by Engineer-in-Charge .

S&F Tubular towel rail cromium plated 20mm dia D-type 60cm long between flanges, fixed as in repairs, complete, all as directed by Engineer-in-Charge .

S&F PVC kit for low level flushing cistern,vertical type for push system flush fixed as in repairs, complete all as directed by Engineer-in-Charge .

S&F Chromium plated, Brass, jet spray including PVC connection for wash down water closet (pedestal pattern), fixed as in repairs, complete all as directed

Supply and fixing in repairs Chromium plated hand shower (Health Faucet) with 8mm dia, 1.2metre long flexible tube & wall hook complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore ball valve PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge

All as per item No 58 here in before but 20 mm bore complete all as specified and directed Engineer-in-Charge . .

S&F Rotational moulded polythene water storage tanks 500 ltrs capacity (cylindrical, vertical with closed top) hoisted and fixed in position in repairs including connecting to inlet and outlet pipes complete all as directed by Engineer-in-Charge .

S&F Rotational moulded polythene water storage tanks 1000 ltrs capacity (cylindrical, vertical with closed top) hoisted and fixed in position in repairs including connecting to inlet and outlet pipes complete all as directed by Engineer-in-Charge .

Taking up or down, steel tubing 15 mm bore and connections including cleaning for re-fixing or removing complete all as directed by Engineer-in-Charge .

Taking up or down, steel tubing 20 mm bore and connections including cleaning for re-fixing or removing complete all as directed by Engineer-in-Charge .

S&F GI tubing 15 mm bore medium grade with necessary GI fittings and fixed complete to wall/ceiling with clips, wall hooks, and wooden plugs etc. or laid in floors complete all as specified and directed by Engineer-in-Charge .

Re-fixing old steel tubing 15mm dia retrieved from serial item No 62 in new or old position and connections complete all as specified and directed by Engineer-in-Charge .

S&F GI tubing 20 mm bore medium grade with necessary GI fittings and fixed complete to wall/ceiling with clips, wall hooks, and wooden plugs etc. or laid in floors complete all as specified and directed by Engineer-in-Charge .

Re-fixing old steel tubing 20mm dia retrieved from serial item No 63 in new or old position and connections complete all as specified and directed by Engineer-in-Charge .

Taking down chowkat or frames with shutter (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified and as directed by Engineer-in-Charge

Taking down shutter of any description exc 1 Sqm but not exc 2.0 sqm each complete all as specified and as directed by Engineer-in-Charge

S & F 35 mm thick 2nd class hard wood factory made plain framed panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part 1 ) kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge

S & F 35 mm thick 2nd class hard wood glazed skeleton shutters factory made open rebated and prepared to recieve glass, guazed etc ( without sash bar ) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part 1 , Section 8 , clause 8.24 (a) and fitted to chowkhat complete all as specified.

S & F 30 mm thick flush shutters solid core constucted with block board core and plywood face panels commercial type on both side all as per specification complete all as specified and as directed by Engineer-in-Charge

S&F steel windows 1.25mm thick box type (primer coated) ERW hollow 'P' section of size 60mmX25mm single rebate comprises of skeleton shutter ERW sec 50X20mm & 1mm thick & openable leaf consisting two nos sash bar of T section 20X3mm complete welded to frame incl cutting holes & making good dismanteled portion in PCC 1:2:4 type B-I four nos for each window incl following fitting welded to shutter :- (a) Hold fast 150mm long 12mmX3mm made to shape-04nos each window (b) Handle of Z section 20X25mm ,100mm long 01nos each leaf (c) MS tower bolt 150mm long 02 nos each leaf (d) Z sec 20X25mm ,100mm stopper-01nos per leaf (e) Cleat 55mm long of hollow square 15X20X63mm welded to hinges-01Nos per leaf (f) MS Box type hinges of size 75X12mm-02Nos per leaf (g) Fabrication & fixing complete

All as per item 73 here-in-before but with out sash bars complete all as specified and as directed by Engineer-in-Charge

Steel ventilators fixed type with glazing bars complete all as specified and as directed by Engineer-in-Charge

M & L for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; cooler plat form , framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed by Engineer-in-Charge

S & F 100 mm medium weight cold rolled mild steel butt hinge complete all as specified and as directed by Engineer-in-Charge

Factory made PVC solid single door frame (chowkats) of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening all as specified in SSR part-II 2010 Section-8, clause 8B.3 to 8B.3.2 and shown on drawing on page No 160 of SSR part-II 2010.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and a gap insert for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site all as specified in SSR part-II 2010 Section-8, clause 8B.1 to 8B.2.1 and shown on drawing on page No 156 of SSR part-II 2010. Make : Rajshree / Sintex.

S&F aluminium, anodised butt hinges of 100mm size complete all as specified and as directed by Engineer-in-Charge

S&F aluminium handle cast type, anodised 125mm size complete all as specified and as directed by Engineer-in-Charge

S&F aluminium, anodised barrel tower bolts of extruded section and fixed 150mm long complete all as specified and as directed by Engineer-in-Charge

S & F for Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring over all length of cover plate 150mm complete all as specified and as directed by Engineer-in-Charge

S & F for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engineer-in-Charge

Mild steel sliding door bolts plate type stove enamelled block with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate and fixed complete all as specified and as directed by Engineer-in-Charge

S& F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed by Engineer-in-Charge

S& F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed by Engineer-in-Charge

S & F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square in not exc 0.5 sq.m in each pane all as specified and as directed by Engineer-in-Charge

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or bricks surrounds, glazed with putty or fixed with beads and providing 3 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads using 1st class hard wood in square n exc 0.5 Sqm in each pane all as specified and directed by Engineer-in-Charge .

S & F 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq.m in each pane complete all as specified and as directed by Engineer-in-Charge

S & F 5.5 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq.m in each pane complete all as specified and as directed by Engineer-in-Charge

M & L for preparation of new steel Surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge

M & L for preparation of new wooden Surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge

S & F 100 mm dia Cast iron spun type soil waste and vent pipes, in any length with or without ears with cement joints, fixed to wall complete all as specified and as directed by Engineer-in-Charge

S & F 75mm dia Cast iron spun type pipe , in any length with or without ears with cement joints, fixed to wall complete all as specified and as directed by Engineer-in-Charge

S & F 100mm cast iron sanitary P or S trap to fit WC outlet complete all as specified and directed

S & F 100 mm cast iron sanitary connection short connections pipe of length upto 300mm complete all as specified and as directed by Engineer-in-Charge

S & F 75mm bore of bends (any radius ) diminishing pieces or tapers ( larger bore measured ) with oval access door complete all as specified and as directed by Engineer-in-Charge

S & F 100mm bore of bends (any radius ) diminishing pieces or tapers ( larger bore measured ) with oval access door complete all as specified and as directed by Engineer-in-Charge

S & F 100 mm Branch pieces single (equal or unequal ), ordinary or inverted ( spigot or socket type ) or with paralle branches or T piece with oval access doors complete all as specified and as directed by Engineer-in-Charge

S & F 75 mm Branch pieces single (equal or unequal ), ordinary or inverted ( spigot or socket type ) or with paralle branches or T piece with oval access doors complete all as specified and as directed by Engineer-in-Charge

Dismantling of cast iron pipes and fittings of any description complete all as specified and as directed by Engineer-in-Charge

S & F 75mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4 ) using 20mm graded aggregate complete all as specified and as directed by Engineer-in-Charge

S & F Salt glazed stoneware gully traps of 150x150 mm of size square or round mouthed type P complete all as specified and as directed by Engineer-in-Charge

S&F grating doom 100mm dia size with PTMT complete all as specified and as directed by Engineer-in-Charge

S&F in repairs 75 mm bore PVC (SWR) pipes single socketed , in any length with rubber ringe joint laid in trenches or in floors and walls including clamps complete all as specified and as directed by Engineer-in-Charge

S&F in repairs 110 mm bore PVC (SWR) pipes single socketed , in any length with rubber ringe joint laid in trenches or in floors and walls including clamps complete all as specified and as directed by Engineer-in-Charge

S&F in repairs 150 mm bore PVC (SWR) pipes single socketed , in any length with rubber ringe joint laid in trenches or in floors and walls including clamps complete all as specified and as directed by Engineer-in-Charge

S&F in repairs PVC (SWR) bends 75 mm bore complete all as specified and as directed by Engineer-in-Charge

S&F in repairs PVC (SWR) bends 110 mm bore complete all as specified and as directed by Engineer-in-Charge

S&F in repairs PVC (SWR) bends 150 mm bore complete all as specified and as directed by Engineer-in-Charge

S&F in repairs PVC (SWR) vent cowl 110 mm bore complete all as specified and as directed by Engineer-in-Charge

M&L 75 mm thick PCC 1: 2: 4, type B-1, using 20 mm graded crushed stone aggregate as in , hard standing, path and similar works face finished even and smooth without using extra cement complete, all as specified and directed by Engineer-in-Charge .

Demolition of brickwork built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlars facings, dressed stonework and pre-cast concrete articles complete all as directed by Engineer-in-Charge .

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6, using old size bricks as in full brick thick wall complete, all as specified and directed by Engineer-in-Charge .

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 4, using old size bricks as in half brick thick wall complete, all as specified and directed by Engineer-in-Charge .

Note : Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.

M/S GURBACHAN SINGH