8432 REPAIRS TO FLOORING WALLS PLASTERING CEILING AND ALLIED WORKS IN CERTAIN BLDGS IN AIPT AND APTC UNDER GE (CENTRAL) PUNE

Amount

Taking down shutters area exc 1.00 Sqm but not exc 2.00 Sqm each & removing from site all as directed.

Taking down Shutters of any description n exc 1 sq. m each and refixing in the same opening after carrying out necessary Resecuring or easing & adjusting / minor repairs etc all as specified and as directed.

All as per item No 2 above but area exc 1.00 Sqm but n0t exc 2.00 Sqm each all as directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frame) area not exc 1.50 Sqm each & removing from site complete including making good disturbed portion of jambs with PCC 1:3:6 type C-1 using 20mm graded aggregates, plastering, finishing as required etc all as directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frame area exc 1.50 Sqm but not exc 4.00 Sqm each & removing from site complete including making good disturbed portion of jambs with PCC 1:3:6 type C-1 using 20mm graded aggregates, plastering, finishing as required etc all as directed.

S & F pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed..

All as per as item No 29 above but 105 x 60mm all as specified and directed..

M & L for Cement concrete 1:3:6 type C-1 using 20mm graded stone aggregates as in filling of pressed steel frame and hold fast block cutting etc complete all as specified and directed.

S & F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, one face is covered with decorative face veneer with lipping/frame to match complete as directed

Supply and fixing factory Made 2nd class hard wood 35mm thick glazed and skelton shutters open rebated and prepared to receive gauge. (With sash bars of any nos) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a) supplied and fitted to chowkats complete all as specified.

S & F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg given on page 176 of SSR 2020 Part II The width of stiles and rails shall be as specified in para 8B.2.1 on page 145 of SSR 2020 part II. complete all as specified and directed.

S & F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as shown in sketch on page 180 of SSR 2004 Part-II complete all as specified and directed.

S & F louvers glass ventillators with partially guaged shutter using 5mm thick x 10cm wide frosted glass strips with following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading and all necessary fittings as required etc complete all as specified and as directed. (a) SP 20048 (b) Glazing clips 19352

S & F 150mm extruded aluminium alloy powder coated handles fabricated type complete all as specified and directed.

S & F 150mm long aluminium powder coated barrel tower bolt of extruded section all as specified and directed .

S & F 100mm butt hinges , medium weight , colled rolled complete all as specified and directed.

S & F 150mm long floor door stopper of aluminium alloy body and ongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

Supply and Fix in repairs 25mm dia decorative type curtain rod , stainless steel , with not less than 1.00mm wall thickness complete all as specified and directed.

Supply and fix decorative type brackets , stainless steel, suitable for above curtain rod complete all as specified and directed.

Supply and Fix in repair stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.

Supply and Fix in repair 300mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plates complete all as specified and directed.

S & F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, door chowkats of angle or other section and similar works complete of Grade Fe-290 Grade E-165 including welding etc complete all as specified and as directed.

M & L preparation of new or previously untreated surfaces of steel of any description over 10cm width or girth not otherwise described over applying two coats of synthetic enamel paint over a coat of a red oxide zinc primer complete all as specified and as directed.

M & L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Dismantling floor, heath or wall tiling including cement mortar bedding (but not backing) and removing debris out side of defence land complete all as as directed.

Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc including cement mortar bedding rand removing debris out side of defence land complete all as as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and removing debris out side of defence land complete all as as directed.

M & L 75mm thick cement concrete 1:4:8 , type D-2 using 40mm graded stone aggregate as in levelling course / sub base complete all as specified and as directed.

M & L 50mm thick cement concrete 1:2:4 , type B-1 using 20mm graded stine aggregate as in levelling course complete all as specified and as directed.

M & L 25mm thick cement concrete 1:2:4 , type B-1 using 20mm graded stine aggregate as in levelling course complete all as specified and as directed.

M & L for vitrified ceramic tiles of size 600mm x 600mm x 8-10mm thick (square/ rectangular) in floors etc set and jointed in neat cement slurry and pointed flush in white or colour cement with pigment over and including 20mm thick cement mortar 1:6 screed bed complete all as specified.

All as per item No 33 above but in skirting / vertical surfaces over and including 10mm thick baking coat of CM 1:4 complete all as specified and as directed.

Material and labour for Non skid coloured ceramic tiles of size 400mm x 400mm x 7 to 8mm thick, (Square / rectangular) over & including 20mm thick screed bed in CM 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified and directed.

M & L for colored glazed ceramic tiles of size 300mm x 450mm x 7 to 8mm thick (Matt Finish) on vertical surfaces set and jointed in neat cement slurry and pointed in white or colored cement to match including 10 mm thick backing coat in cement mortar 1:4 on brickwork or stone masonary surfaces complete all as specified and directed.

M & L 20mm thick granite (of any type) work table rubbed and polished in steps, jambs, pillars, window cills, cooking platforms, floor / skirting / risers or as in vertical support or counter top for wash basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite over and including 15 mm thick screed layer in CM 1:3 with edges polished / rounded as ordered incuding cutting circular or eliptical hole in granite slab and fixing in position complete and ensure best adhesion to surface complete all as specified and as directed.

M & L 20-25mm thick Machine cut cudappah stone slab over and including cement screed bed, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab ncluding rubbing and polishing complete all as directed.

M & L for 50mm thick cement concrete 1:3:6, type C-1 using 20mm graded stone aggregate as in plinth protection and PCC paved area finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of old plastered or unplastered surfaces of wall by brooming / wire brushing / removal of loose scales / dusts / unwanted particles manually / mechaincally and applying one coat of white wash complete all as specified and directed.

All as per item No 42 above but in ceiling complete all as specified and directed.

M & L for preparation of old plastered or unplastered surfaces of wall by brooming / wire brushing / removal of loose scales / dusts / unwanted particles by manually / mechaincally and applying one coat of cement based paint complete all as specified and directed.

M & L for preparation of old plastered or unplastered surfaces of wall by brooming / wire brushing / removal of loose scales / dusts / unwanted particles by manually / mechaincally and applying one coat of oil bound distemper complete all as specified and directed.

All as per item No 45 above but in ceiling complete all as specified and directed.

M & L for preparation of old steel surfaces of any description over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old wood / wood based surfaces of any description over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old plastered or unplastered surfaces of wall by brooming / wire brushing / removal of loose scales / dusts / unwanted particles by manually / mechaincally and applying one coat of acrylic emulsion paint (plastic emulsion) complete all as specified and directed.

M & L for complete removal of existing treatment on walls (any number of layers ) by scrapping by manually / mechanically means and applying two coats of oil bound distemper over a coat of alkali resistance primer primer over and including a coat of 2mm thick wall care putty complete all specified and directed.

M & L for rendering 10mm thick in cement mortar 1:6 on brick / concrete surfaces finished the surfaces even & smooth with a thin layer of sagol finish in patches works including including taking down cement plaster or cement lime plaster including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:4 in two layers, (5mm thick in CM 1:4 over a coat of 10mm thick in CM 1:4) on brick / concrete surfaces finished the surfaces with sponge finish in patches works ncluding including taking down cement plaster or cement lime plaster including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed .

M & L preparation of newly plastered surfaces of walls of any description and applying two coats of oil bound distemper over a coat of alkali resistance primer over and including a coat of 2mm thick wall care putty complete all specified and directed.

M & L Preparation of newly plastered or unplastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all specified and directed.

M & L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets, any thickness including cover fillets complete all as directed.

S & F in true horizonal level 595 x 595 mm false ceiling with incliding 8mm thick one side laminated Non Asbestos fibre cement building E-board for false ceiling fixed to section with 25mm long self drilling and tapping screws having phillips head with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seamless finish including GI powder coated snap grid of size 600 x 600mm, using hot dipped galvanised steel section, exposed surface with pre-coated capping main Tee of size 32 x 24mm x 0.5mm thick at every 1200mm centre to centre maximum and rotary stitched cross tee of size 25 x 24mm x 0.5mm thick at 1200mm centre to centre and wall angle of size 20 x 20mm x 0.5mm thick fixed to the periphery of the wall. The above grid is suspended at every 1200 mm centre to centre in both directions using 2.0mm thick pre-straightened GI wire on main runners including making niches for fans / light complete all as specified and directed.

S & F in true horizonal level 595 x 595 mm false ceiling with incliding 12mm thick seamless calcium silicate ceiling made out of 1800 x 1200mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillips head with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seamless finish including GI powder coated snap grid of size 600 x 600mm, using hot dipped galvanised steel section, exposed surface with pre-coated capping main Tee of size 32 x 24mm x 0.5mm thick at every 1200mm centre to centre maximum and rotary stitched cross tee of size 25 x 24mm x 0.5mm thick at 1200mm centre to centre and wall angle of size 20 x 20mm x 0.5mm thick fixed to the periphery of the wall. The above grid is suspended at every 1200 mm centre to centre in both directions using 2.0mm thick pre-straightened GI wire on main runners including making niches for fans / light complete all as specified and directed.

M & L for GI tubing 15mm bore dia medium grade including all fittings such as bend, elbow, union, tee, short pieces etc fixed to walls, ceilings or laid in floors including taking up or down old steel water tubing and connections complete all as specified and directed.

M & L for GI tubing 20mm bore dia medium grade including all fittings such as bend, elbow, union, tee, short pieces etc fixed to walls, ceilings or laid in floors including taking up or down old steel water tubing and connections complete all as specified and directed.

Supply and Fix in repair kitchen or laboratory sinks with drainage board made of stainless steel 1.00mm thick with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repair vitreous china water closet squatting pan "ORISSA" pattern of size 580mm x 440kmm, white with integral foot rest including cast iron 'P' or 'S' trap (but excluding flushing cistern and flush pipe) includintg cement concrete bedding etc if required and including making good to floor complete all as specified and directed.

S & F in repair vitreous China wash down water closet (pedestal pattern), white with including cast iron 'P' or 'S' trap and connection to trap , fixing bolts, seat cover (excluding flushing cistern and flush pipe) complete connected to drain complete all as specified and directed.

Supply and Fix in repairs vitreous china coloured Wash hand basin flat back, size 550 x 400mm white excluding pillar taps & waste pipe but including Waste coupling chromium plated and fixing brackets complete all as specified and directed.

S & F in repairs 15mm , bib taps , cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as directed and specified. Make : Essco Cat Part No : TQT-512 or equivalent of Jaquar, Marc, Cera

S & F in repairs 15mm , angle cock , cast copper alloy , fancy type , chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed. Make : Essco Cat Part No : TQT-526N or equivalent of Jaquar, Marc, Cera

S & F in repairs 15mm stop valve , Long shank concealed type, fancy type , chromium plated , cast copper alloy with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed. Make : Essco Cat Part No : MQT-514AKN or equivalent of Jaquar, Marc, Cera

S & F in repair 125mm size brass chromium plated shower rose with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S & F in repairs 15mm dia PVC connections with PTMT nuts , length 450mm all as specified and directed.

Supply and Fix in repairs 15mm pillar taps of cast copper with capstan head, chromium plated, fancy type, screwed down high pressure with or without lettered 'hot' and 'cold' with long screwed shank and fly nut for iron pipe complete all as specified and directed. Make : Essco Cat Part No : STE-107001 or equivalent of Jaquar, Marc, Cera

S & F in repair 10 Litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed.

S & F mild steel chromium plated Health faucet (ABS Body) suitable for 15mm dia pipe with 1.25 Metre long flexible cord and with ABS hose and wall hook including making connections and fixed in position complete all as specified and directed.

S & F in repairs 20mm dia Brass, Chromium plated,Tubular towel rail dia complete all as specified and directed.

S & F in repairs 20mm dia Brass, Chromium plated, Tubular towel rail, , D type, 60cm long between flanges complete all as specified and directed.

S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S & F in repair Brass chromium plated wall mixer (2-in-1) for mixing hot & cold water screwed down for iron pipe all as specified and directed.

M & L 75mm Cast iron Nahani trap with grating with or without holes including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1complete all as specified and directed.

M/s Asrani and sons

Suma Construction

ANIL CONSTRUCTION CO.

M/S NAVNEET S MORDE

Sanjay Glass

SHREESAMARTH CONSTRUCTION

K.K.Enterprises