SPL REPAIRS TO BLDG NO. ET-71 AND PROVN OF STORE SHED AT RANGIYA UNDER GE RANGIYA

Amount

Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing

Taking down cement plaster on brick/concrete surfaces of walls and ceiling including racking out jointing hacking for key, scrubbing down with water etc.

Taking down wooden shutters of any description n.exc 1 sqm each complete all as specified and directed.

All as above item no 3 but exc 1 but n.exc 2 sqm each

Taking down chowkhats incl shutterrs n exc 1.5 sqm

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for.

Dismantling of Boarding, any description and any position, fixed with Nails, complete all as specified and as directed.

Taking up or down steel tubing of size 15 mm and connections, including cleaning for refixing or removal to store

Taking up or down steel tubing of size 20 mm and connections, including cleaning for refixing or removal to store

S&F 15mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors

S&F 20mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors

Dismantling of wall & ceiling Boards (fibre,pulp,insulation etc.), or insulation board/slabs/ blankets ,any thickness, including cover fillets.

Dismantling of AC sheet corrugated / Semi corrugated sheets in wall cladding or in roof covering

S&F Factory Made Solid PVC moulded Door Shutter (with wood free EPS) 28 to 30mm thick (style) with 2,4, or 6 raised panel design with 2mm thick moulded prelam sheet on the front face and 2mm prelam PVC sheet on back face Complete as per direction of Engineer-in-charge, manufacturer's instruction and drawing.

S & F Factory made solid wire gauzed pvc door shutter 30mm thick (style) consisting of frame made out of M.S.tubes for top & bottom rails.M.S.frame shall be covered with heat moulded prelam PVC "C" channel having a prelam PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panells will be wire gaused in lieu of single side prelam PVC sheet panel. The wire gause shall be wrapped on an additional square 8 mm MS solid tube and this tube shall be welded to MS tubes. The wire gause shall be stretched to tighten firmly. And jointed to gether with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

M&L 12 mm thick rendering in cm (1:6) on one side of lathing finished even & smooth without using extra cement.

G I Wire netting 0.9 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc., in walls, ceilings, stanchions, beams, etc., including all laps, cutting and waste

M&L 18 mm thick rendering in cm (1:4) one side of lathing with using WPC @ 3% finished even & fair.

M&L 15mm thick rendering in cm (1:4) on fair faces of brick work finished even & fair.

M&L applying two coats of distemper over a coat of 3mm thick a layer of wall care putty on walls.

M&L two coats of oil bound distemper over a coat of 3mm thick layer of wall care putty including preparation of old surfaces by complete removal of existing treatment

M&L two coats of cement base paint over a coat of primer including preparation of new surfaces.

M&L two coats of cement base paint over a coat of primer including complete removal of existing treatment.

Supply only integral water proofing compound

M/L 75mm thick P.C.C 1:3:6 type C-2 using 40mm graded stone aggregate as in sub base/path etc complete all as specified and directed.

M&L 25 mm thick P.C.C (1:2:4) type B-1 using 20mm graded stone aggregate as in floor finished rough.

M & L Screed Bed or Bedding Layer 15mm thick in Cement Mortar 1:6 for laying Floor Finishes/Tiles, complete all as specified and as directed

M & L for Rendering or Backing Layer 10mm thick in Cement Mortar 1:4 on Walls, etc. for fixing Tiles as Skirtings, Dados,risers etc, complete all as specified and directed.

S&F non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile 600mmx600 mm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match

All as per item above, but on vertical surface

S&F non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile 300mmx300 mm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match

S&F for colour Glazed ceramic tiles 300X600 mm of 7 to 8mm thick, in dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match.

S/F Stainless steel mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm fitted with tinned tacles or galvanised wire staples complete all as specified and as directed.

S&F in repair Stainless steel wire cloth 0.36 nominal dia wire and average width aperture 1.40mm and fixed with stainless steel wire staples all as specified.

S&F steel window without glazing bars but with FI/Z section for fixing of gauze and steel handle, peg stay complete all as specified and directed by Engineer-in-Charge

S/F steel window side hung shutters including box type hinges with steel handle and steel pegs stay complete with glazing bars complete

Materials and Labour for mid steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

Hacking Out Old Broken Glass (any thickness, size, quality or description) from Wooden Frames, Glazed with Putty or fixed with Beads, complete all as specified and as directed.

S/F 3mm thick ordinary quality sheet glass in squares n.exc 0.5 sqm in each pane glazing with oil putty complete.

S/F 100mm size extruded aluminum alloy handles, fabricated type, anodized.

S&F 150mm long aluminium handle, cast type, anodised

S/F 100mm long aluminum anodized barred tower bolts of extruded section.

S/F 100mm size MS butt hinges, medium weight, cold rolled.

S&F 200 mm aluminium anodised barrel tower bolt, of extruded section and fixed in position

S/F 250mm long M.S sliding door bolt, bolt type stove enameled black with bright bolt not less than 12mm dia and including a minimum of six bolts and nuts four on bolt plate & two on staple plate.

S&F 125 mm Butt hinges medium weight cold rolled mild steel and fixed.

S & F Floor door stopper 14cm long of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in repairs in floor

S&F in repair exposed GI powder coated snap grid frame of false ceiling 600 X 600 mm size of wall angle 25 X25 X 0.30mm size cross Tee 22 X 35 X 0.60mm with 4mm dia GI suspender fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm including supply and fixing of 4 mm thick E- board in false ceiling including fixing arrangement from roof and applying three coats of white wash on exposed surfaces all as specified and directed. (Note- Rate included for lowering / shortening of electric fittings such as fan, light fittings etc.

S & F in repair 300mm, ordinary rat tail rod pattern door springs including roller and roller plate complete

Dismantling timber scantling 40 sq cm and over in section in any position.

M/L 2nd class H.W scantling wrought as in unframed work.

All as per item above but except timber

Dismantling of timber boarding of any description fixed in any position with nails complete all as specified and directed.

Supplied & fixed 20 mm thick Boarding of 2nd class hard wood, with nails in any situation planed both sides.

Preparing surface of wood and wood based material new of any description and girth exc 10 cm other wise decribed and treated with two coat of creosote oil

M/L for 2 coats of synthetic enamelled paint over coat of pink primer on wooden surfaces oves 10cm width or girth including preparation of new surface.

M/L 75mm thick P.C.C 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection complete all as specified and directed.

Forming Constrution (Dummy) joints 30 mm deep x 10 mm wide, filled with sealing compound grade A

M &L PCC (1:3:6) type C-2 as in drain/surface channel and similar work .

Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete with fair finished with using extra cement.

Demolition & bracking up 75/100mm bore AC/CI/PVC pipe set in cement mortor.

S/F 110mm bore P.V.C (S.W.R) pipe, single socketed in any length with rubber ring joints fixed to walls.

S/F 110mm bore P.V.C (S.W.R) bend

S/F 110mm bore P.V.C vent cowl

S&F 110mm bore PVC (SWR) branch piece, single `Y’ equal or un equal.

S/F 75 mm bore P.V.C (S.W.R) pipe, single socketed in any length with rubber ring joints fixed to walls.

High density polyethylene pipes(HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.

S&F in repairs Vitreous China wash down water closet pan 580 x 440 mm (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete.

S&F in repairs 10 lits capacity PVC low level flushing cistern including pull chain & flush pipe, connection pipe etc complete all as specified & directed.

S & F in repairs connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed

S&F in repairs 15mm bore fancy type chromium plated bib taps with crutch or butterfly handle screwed down for iron pipes.

S&F in repairs 15 mm bore stop valve cast copper alloy, screwed down, high pressure, with crutel or butterfly handle, screwed both ends for iron pipe or for unions.

S & F in repairs vitreous china white wash hand basin glat back of size 550 x 400 mm including brackets CP waste coupling 32 mm and PVC waste pipe and 15mm PVC connection complete.

S & F 3mm thick figured glass n exc 0.5 sqm in each pane glazing with oil putty complete

S & F in repairs 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed

S & F in repairs connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed

M & L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified as specified and directed

M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/eaves board, fixed with selftapping screws as specified and directed

Demolition of brick work built in cement mortar including all quions, arches pillars etc. all as specified and directed.

M&L brick work using sub class ‘B’ bricks (old size) straight or curved on plan to any radius in half brick work built in CM 1:4 complete all as specified.

M& Lfor R C C 1:1.5:3 (,20mm gradded agg) as Lintel/chajja etc.

M&L for RCC 1:1.5:3 ( 20 mm graded agg) as in column, post etc.

Form work fo the side of the column , rough finished flat surface area.

Formwork to side and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, verhangs etc also plays between floors and beams etc.

S&F 10mm dia and over TMT bars as in reinforcement cut to length bent to shape etc as required incl binding with MS wire annealed not less than 0.90 m dia.

All as above but 5 mm dia and over upto including 10 m dia in stirrups, spacers and bincer etc.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S & F of Fe-410 Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.

All as per above, but erection and fixing only

M&L for preparation new surfaces of steel and iron surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed

M&L for preparation old painted surfaces of steel and iron surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

Preparation of wood and wood based material, steel or iron work of any description or girth not otherwise described and treated with with tar or coal tar black paint.

Sanding newly tarred or painted surfaces with clean sharp sand

M&L for ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 drgee at 150 mm centre to centre and sealing the same.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches n exc 1.5 mtr depth nd n exc 1.5 m wide in soft/loose soil and getting out.

M&L PCC (1:4:8) type D-2 using 40 mm graded stone agg as in fdn filling mass concrete.

M&L for RCC 1:1.5:3 ( 20 mm graded agg) as in foundation, base for column , plinth beam etc.

M&L for RCC 1:1.5:3 ( 20 mm graded agg) as in roof slab supported on wall, beam, landing, desk slab etc.

Form work of the side of the concrete foundation, footing, base of column rough finished flat surface.

Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick ( Horizontal or sloping).

Formwork to edge of concrete flats, breks in flooors, openings in concrete walls , floors and roofs and sides of RCC/PCC bands in walls, horizontal or loppin and similar work all exceeding 20 cm wide(Where RCC/PCC band in walls spanning and opening , the formwork soffit only shall be paid for under item 7010 of SSR Part-II

M&L brick work using sub class B brick curved or straight in plan exc 6 mtr mean radius in cm (1:6)

M&L 10 mm thick plastering on wall concrete surfaces in cm (1:6) even and smooth w/o using extra cement.

M&L 5 mm thick plastering on ceilling concrete surface in cm (1:3) even and smooth w/o using extra cement.

M&L for sand filling under floor or in foundation incl watering as reqd.

M&L for 75 mm thick cement concrete in sub base of floor in cement mortar (1:3:6) type C-2

Damp proof course to horizontal or vertical surfaces including necessary formwork.

Polythene film,150 micron thick, laid on a coat of bitumen primer, @ 0.30 to .50 kg per sq. m

Returning/Filling in trenches in layer n exc 25 cm thick including watering well ramming etc.

Removing excavated soil to distance n exc 50 mtr and deposited as directed by Engr-in -Charge.

M&L 15 mm thick rendering in CM 1:4 on wall, finished the surface even and fair with using wpc (WPC shall be measured seperately)

Supply only integral water proofing compound.

M&L Hard core of gauge n exc 63 mm of broken boulder bellow plinth protection/hard standing/floor

M&L PCC 1:3:6 type C-2 75 mm thick as in plinth protection even and smooth without using extra cement.

15 mm thick screed bed or bedding layer of mortar in CM 1:6 fixing of tiles in floor.

M & L for kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

All as per item above but in skirting

Forming Constrution (Dummy) joints 30 mm deep x 10 mm wide, filled with sealing compound grade A

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of primer

M&L for preparation of new plastered surface of ceiling and applying three coats of white wash

M&L PCC (1:3:6) type C-1 as in bed block of hold fast using 20 mm stone agg steps etc.

Preparation of newly steel surfaces exc 10 cm width or grith and applying 2 coats of synthetic enamel paint over red oxide.

M&L for galvanised mild steel wire cloth of 0.56mm dia and average aparure of 1.4mm and fixed in position

S & F Pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

S & F 35 mm thick flush shutter , solid core construction ,with block board core and plywood face panel ,commercial type on both side.

S/F 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauge etc. Divided into squares with plain chamfered or rounded, rebated sash bars, sizes of the members of the shutters as specified in SSR Part I, section 8, clause 8.23(a).

S&F 300 mm Aluminium alloy anodised sliding door bolt, plate type and fixing clip of sheet cast of extruded section and fixing bolt and sliding bolt of extruded section and fixed in position complete

M&L for extruded aluminium alloy handle fabricated type of 150 mm long

M&L for preparing new wood based Surfaces of any description, exc 10 cm width or girth and applying two coats of synthetic enameled painting over a coat of pink primer complete as specified and directed

Preparation of concrete roof surfaces applying roof treatment as under:- (a) Applying bitumineous primer @ 0.30 litre per Sqm of surface (Shalitex Primer of STP Limited or equivalent as approved by GE (b) Applying coat of hot applied bitumen 85/25 @ 1.20 Kg/Sq m of surfaces (Make : STP Ltd or equivalent as approved by GE) (c) Laying of APP Modified water proofing membrance with non-woven polyster Reinforcement on hot applied bitumen with 100mm over lap at joints by torching on the transverse direction and 75 mm on longitudinal directional all as per manufacturer's instructions (Make : SUPER THERMOLAY OF STP LTD OR EQUIVALENT IWL/TEXSA) (d) Applying a coat of bitumineous aluminium paint @ 0.10 litre/SM (Super Silver sheild of STP Ltd or equivalent as approved by GE)

M&L for 15 mm thick screed bed in cm 1:3 mixed with WPC as per manufactures instruction finished even and smooth over RCC roof slab without using extra cement (WPC shall be measured seperately)

E/M portion Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) complete all as specified and directed.

Taking down main switches DBs with sheet metal enclosure 2/4/6/8 way SPN/TPN/DBs complete all as specified and directed.

Taking down old existing ceiling fan/exhaust fan of any size, ceiling cable end removing fan and blades including painting of ceiling fan/exhust fan complete in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust complete all as specified and directed.

Material and labour for point wiring complete with 1.5 sqmm PVC insulated unsheathed 1100 volts grade cable stranded copper conductor single core in casing caping of 20/25 mm complete with pvc terminal box for fitting mounting switch/ sockets regulators etc with laminated sheet 3 mm thick cover and with 1.5 sqmm PVC insulated copper conductor earth wire and connected to earth dolly for one light point controlled by one switch complete all as specified and directed.

All as per item No 140 above but ceiling fan point controlled by one switch complete all as specified and directed.

All as per item No 140 above but exhust fan point controlled by one switch complete all as specified and directed.

All as per item No 140 above but for one bell point controlled by 5 Amps bell Push complete all as specified and directed.

All as per item No 140 above but for one 3 pin socket 5 Amp single pole one way on same board with other switches including continuous 1.5 sqmm PVC insulated copper conductor earth wire to common wire earth and connecting to earth dolly complete all as specified and directed.

All as per item No 140 above but for 3 pin socket outlet 15 Amp independent with cable 4 sqmm unsheathed stranded 1100 Volts grade complete with 4 sqmm PVC insulated earth wire and connecting to earth dolly complete all as specified and directed.

All as per item No 140 above but for one 3 pin socket 5 Amp independent complete all as specified and directed.

Supply and fix ceiling rose surface backelite, three terminal complete all as specified and directed.

Supply and fix switch piano type 5 Amp single pole one way complete all as specified and directed.

S&F stepped type electronic fan regulator flush type for ceiling fan suitable for 1200/1400 mm sweep including necessary electric connectioncomplete all as specified and directed.

Supply and fix socket outlet 2 in 1, 5 pin 5 Amp flush type complete all as specified and directed.

Supply and fix switch socket combination multipurpose 3 pin 15 Amp and 3 pin 5 amp flush type 2 in 1 complete all as specified and directed.

S&F angle type lamp holder PVC polycarbonate type suitable for batten fittings complete all as specified and directed.

Supply and fix bell push 5 Amp flush type single pole 230 volts one way complete all as specified and directed.

Supply and fix call bell AC, 230 Volts single pole complete all as specified and directed.

Supply and fix sheet metal enclosure powder painted MCB DB SPN double door 230 Volts 12 way double door complete all as specified and directed.

Supply and fix sheet metal enclosure powder painted MCB DB TPN double door 230 Volts 6 way double door complete all as specified and directed.

.-ditto- all as per item No. 156 above but 8 way double door complete all as specified and directed.

S&F MCB single pole and neutral upto 32 A capacity 240V complete all as specified and as directed.

Supply and fix MCB SP 240 Volts 6 to 32 Amps breaking capacity 10 KA rating complete all as specified and directed.

S&F MCB Triple pole and neutral upto 63 A capacity 240V complete all as specified and as directed.

Supply and fix LED batten 4' with wide angle profile. high lumen batten suitable for 20 Watt complete all as specified and directed.

Supply and fix LED tube 20 W with single side connection suitable to fix in LED baten of 20 Watt complete all as specified and directed.

Supply and fixing LED 36 W,6000K recess mounted 2'x2' size square down lighter with aluminium extrusion square ring and separate replaceable electronic driver suitable for grid ceiling/Armstrong complete all as specified and directed.

Supply and fix 10 watt surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver complete all as specified and directed.

S & F Single pole and neutral enclosure with a two pin and plug and socket complete with one single pole 20 Amps MCB complete all as specified and directed.

S&F Building security light fitting, energy saving new generation of 10W LED bulk head luminaire with opal diffuser complete with LED lamp of 10W LED complete all as specified and directed.

Material and labour for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level coneected to galvanised earth lead wire of 4.0 mm by mean of bolts, nuts, check nuts and washer of galvanised iron steel all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including PCC pit and CI cover cover fullel with watering pipe, wire mess and copper lugs etc GI protection pipe of size 15mm dia including testing on completion complete all as specified and directed.

S & F 4 Sqmm two single core PVC insulated cables with standed FRLS copper conductor 1100 V for sub main wiring (Red and black colour) and drawing in to and including PVC casing and capping 20mm wide with all fitting including 4 Sqmm PVC insulated stranded FRLS copper conductor cable earth continuity conductor (green colour)complete including taking down unserviceable cable complete all as specified and directed. (Note:-Two runs of 4 sqmm cable,one run of 4 sqmm cable alongwith casing capping shall be measured as one length for measurement)

S&F PVC terminal boxes for mounting mounting of DBs with 2 mm thick plastic laminated sheet cover complete all as specified and directed

Supply and fix down rod 12mm dia made out of high density mild steel 900 mm long as per approved sample all as specified and directed.

Supplying & Fixing, connecting, commisioning and testing LT Cable XLPE insulated heavy duty armoured sheathed 1100 volts grade for the following sizes, with aluminium conductor, ISI marked as per IS : 7098(Part-1) complete all as specified and directed: (a) 16 Sq mm, 2 core,

(b) 35 Sq mm, 3½ core

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth and getting out soft/loose soil complete all as specified and as directed for foundation of stay, laying of cable etc complete all as specified and directed.

Returning filling in soil including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material soil n.exc 50 m and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed.

Material and labour for Sub Class 'B' Bricks, dry, well brunt bricks laid in trenches for cable protection complete all as specified and directed.

M&L for sand filling in trenches for cushioning of cable complete all as specified and directed.

S & F GI tubing 40 mm dia medium grade in protection of cable of diffrent dia laid in trench under road/foot path or fixed on pole with necessary clamps with bolts etc complete all as specified and directed.

Hanging only ceiling fan/exhust fan of any sweep to its original position including necessary electric connection with new flexible cord copper three core of size 40/0.00076 complete all as specified and as directed.

Refixing of LED Light fitting of any type including necessary electric connection with new flexible cord copper three core of size 40/0.00076 complete all as specified and as directed.

S & F 20 watt, 5700K LED building security light luminarie new generation energy saving & environmental friendly long life versatile pressure die cast aluminium IP65 protection and impact resistance of IK07 road way luminarie with high power LED as light source and electronic driver fixed on existing GI bracket with electric connections with suitable cable complete all as specified and directed

S & F street light bracket made out of 32 mm bore GI tubing medium grade 1.20 Mtr long bend to required shape as in bracket for building security light fittings fixed with two pair or MS flat iron 40mm x 5mm size and 30 cm long clamp of rquired shape with bolts nuts and washers suitable for wall including painting of mild steel flat iron surfacesa with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

S & F ceiling fan 1200 mm sweep, energy saving, five star rating, 3 each blade with internal pre wired, ISI Marked of approved colour complete all as specified and directed

Boring of holes under road, pavement, hard standing, drain etc by conventional method not exceeding 5 mtr in length for laying of cable for protection of pipe etc complete all as specified and as directed.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the IRC specifications shall be followed. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule "A" notes for details.

M/S S.S. Construction

M/s SHARMA BUILDERS & ENGINEERS

M/S SITAL BUILDERS