Renovation of Open Well at Gangai Amman Kovil Street

Brick work in CM 1:3 (one cement & five sand) using ground moulded country bricks of size 8 3/4"X4 1/4" X 2 3/4" standard specification including finishing, curing, etc., complete complying with standard specification - 100cft

Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Supplying, Fabricating, Erecting structural steel work for roofing welding or bolted type using MS Channels, angles, plates and round bars etc conforming to IS specification including primer coating and enamel painting as per Design given by the departmen

Supply and fixing of Weld mesh 7.5 x 2.5cm 10 Gauge including cost and conveyance of materials to work site Including all labour charges etc complete

Painting 2 coats with approved cement paint over cement plastered wall surface, ceiling and other new surface and including cleaning, preparing the surface and curing etc., complete.

Painting iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -

Desilting of sand and silt under water (SS20 B ) Earth work excavation and depositing on bank with initial lead and lift etc complete

Dewatering Using Diesel Engine Pumpset Including Hire Charges, Cost of Diesel, Engine Oil, Pump Operator, Labour charges Conveyance of Pumset and fuel to site and back, loading, unloading and any other incidental charges etc Complete

Supply and delivery of 10HP Open well Submersible pump set as per 14220 / 2002 With out panel Board 200 lpm x100m including cost and conveyance of materials to work site etc complete.

Supply and delivery of 12.50 HP Three phase panel board star -delta with two level guard and auto start including cost and conveyance of materials to work site etc complete.

Supply and delivery of jointing of XLPE insulated and sheathed 4 sq.mm 3 core flat type copper cable conforming to IS 694/1990 etc complete as per standard Specification

Supply and delivery of following PVC,HDPE,GI pipes and specials etc completed

90mm dia HDPE pipe

80mm dia GI Elbow

80mm dia Gi coupling

80mm dia Hex Nipple

80mm dia SS Hose collar

80mm dia GM NRV

80mm dia PVC FTA

80mm Dia GI pipe

Nylon Rope

80mm dia GI Flange Set

90mm dia PVC Pipe

90mm dia PVC bend

90mm dia PVC couplers

90mm dia PVC Tee

Supply and delivery of Gi stay wire etc completed as per standard specification

Supply and delivery of 7/16 PVC copper wire for E.B service connection etc complete as per standard specification

Wiring with 2x1.5 Sq.mm(22/0.3)PVC insulated unsheathed Sc Cu .conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.t switch inflush with wall covered with hylem sheet of 3mm thick with painting of suitable colour for open PVC light point/fan point SD18

Construction of brick work pedestal for Kiosk box using country bricks in cm 1:5 mix,size of 0.75mx0.45x1.40m height ,including necessary earth work filling sand, PCC 1:4:8 using 40mm HBG metal,plastering with cement mortar 1;5 mix to 12mm thick and painting two coats over one coat of white washing fixing Kiosk boxover the pedestal etc completed as per standard specification

Supply and delivery of MS Kiosk of size 0.75mx0.45mx0.75m made up of MS angle of size 50mmx50mmx4mm alround covered with 16gauge MS sheet and Kiosk door made up of MS plates of size 25mmx3mm including cutting,welding,grinding .locking arrangements and labour charges etc

Supply and fixng of TNEB Meter Board suitable for 3 Phases 200A service connection made up of suitable angle iron frame work of size 3 feet x 2 feet using angle iron of size 1 1/2" x 1 1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 3 feet x 2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos 200A fuse units (500V) 1 No. Neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuseunits by 19/16 PVC insulated copper wire with earth connection complete SD 131

Earthing as per P.W.D standard with an earth electrode of 2mtr class "B" GI pipe of dia not less than 32mm complete with necessary masonry work as SD 234

Labour Charges for the erection of submersible pumpset in borewell including fixing and jointing submersible cable with proper clamps upto the starter to the required depth and also fixing of riser pipes to required depth values erection clamps,pressure gauges up to the exterior wall of pump room and erextion of panel board consisting of TPICN switches starter,voltmeter,ammeter,three pilot 9indicating) lamps capacitor single phasing preventor ,water level guard and laying and jointing the cables and twin earthing and jointing the cables and twin earthing as per as per I.E. rules etc. complete and testing the pump set and trail run for 10 days