PERIODICAL SERVICES MISC BR EM REPAIR WORKS OVERHEAD TANK CLEANING SEWAGE SYSTEM CLEANING AND REPAIR TO FURNITURE AT ALGS MECHUKA TUTING VIJAYNAGAR UNDER GE AF JORHAT

Amount

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all directed.

Demolition of cement concrete (unreinforced) in ground floor and paving not exc. 15cm thickness (above or below ground level) and removing debries from site of work to out side MD land complete all as specified and as directed.

M&L brick work with sub-class 'B' bricks straight or curved on plan exc. 6 m mean radius built in cement mortar 1:4, complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for brick work with sub-class ‘B’ brick, old size (locally available best quality) straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

M & L for plain cement concrete (1:2:4) type B1 (using (20 mm graded stone aggregate) as in floor, lintel up to 1.5m clear span and similar band plinth courses etc all as specified and as directed.

M & L for preparing old decorated plastered surfaces of wall and applying one coat of white wash complete all as specified and directed.

M & L for preparing old decorated plastered surfaces of ceiling / Soffits and applying one coat of white wash complete all as specified and directed.

M & L for preparation of old painted surfaces of wall of any description and applying one coat of oil bound distemper complete all as specified and as directed.

M & L for preparing of old painted surfaces of any description as in ceiling /soffits and applying one coat of oil bound distemper complete all as specified and as directed.

M & L for preparing of old painted / decorated plastered surfaces of any description as in walls and applying one coat of acrylic base paint weather proof painted/ camouflage pattern complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed.

M&L for Non–Skid Coloured ceramic tiles, of 7-8 mm thick area of each tiles exc. 0.06 sqm but n. exc 0.11 sqm, laid on floor, jointed in neat cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, including Screed Bed or Bedding Layer of 15mm thick in Cement Mortar 1:6 complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles as in vertical surface 350x250x7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including a backing coat of 10mm thick in cement mortar 1:3 complete all as specified and as directed.

M&L for light coloured vitrified Ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, but not exceeding 0.42 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including Screed Bed of 15 mm thick in Cement Mortar (1:6) complete all as specified and as directed.

S&F in repairs 15mm dia Galvanised iron Steel water tubing "medium grade' with all fittings, fixed on walls, ceiling or laid in floors etc. after taking down the old pipe complete all as specified and as directed.

S&F in repairs 20mm dia Galvanised iron Steel water tubing "medium grade' with all fittings, fixed on walls, ceiling or laid in floors etc. after taking down the old pipe complete all as specified and as directed.

S&F in repairs 25mm dia Galvanised iron Steel water tubing "medium grade' with all fittings, fixed on walls, ceiling or laid in floors etc. after taking down the old pipe complete all as specified and as directed.

S&F in repair 15 mm bib taps chromium plated, fancy type with crutch with butterfly handle, screwed for iron pipe or brass ferrule, complete all as specified and as directed.

S&F in repair 15mm bore pillar taps cast Copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed Shanks and Fly-Nuts, screwed for iron pipe and fixed,complete all as specified and directed.

S&F in repair 10 litres capacity PVC low level valve less symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), 'white' including plastic seat cover, black, clossed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair Vitreous China Squantting pan 'ORISSA' pattern, size 580 x 440 mm white, with 'P' or 'S' trap, integral foot rest, providing joints between flush pipe and socket of WC pan ( Excluding flushing cistern and flush pipe), fixing with and including provision of 150 mm thick lime concrete bedding after taking out unserviceable WC pan and connected itmes complete all as specified and directed.

S&F in repair Vitreous China wash hand basin, 'white' flat back size 580 x 450 mm including brackets, waste pipe etc. complete all as specified and directed.

S & F in repair for 15mm size PVC connection pipe with PTMT nut of length 450mm fixed in repairs complete all as specified and directed

S&F in repair Brass, chromium plated mixer of 15 mm dia for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair 15 mm dia Stop valves cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S&F in repair 20 mm dia stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S&F in repair Stop valves 25 mm dia cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed all as specified.

S & F 32mm dia. PTMT waste coupling (half or full threaded) (Minimum wt.45gms) as fixed in repairs complete all as specified and directed.

S&F in repair Ball valve of 25mm dia high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipr and fixed(Minimum weight 455gms) complete all as specified and directed.

S&F in repair 32 mm dia. PVC waste pipe ( min length 750mm) complete all as specified and directed.

S&F in repair 15 mm dia angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed ( Minimum weight 15mm- 90gms) all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) Pipes single socket in any length with rubber ring joint fixed to Wall with MS clamps, including taking down / up unserviceable Pipe, complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) Pipes single socket in any length with rubber ring joint fixed to Wall with MS clamps , including Taking down/up unserviceable Pipe, complete all as specified and as directed.

S&F in repairs 75 mm bore (dia) PVC (SWR) bends of any radius complete all as specified and directed.

S&F in repairs 110 mm bore (dia) PVC (SWR) bends of any radius complete all as specified and directed.

S&F in repairs 75 mm bore (dia) PVC (SWR) Tee of any radius complete all as specified and directed.

S&F in repairs 110 mm bore (dia) PVC (SWR) Tee of any radius complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed.

M & L for well seasoned 2nd class hard wood in scantlings, clean sawn in timber framed and fixed complete all as specified and directed.

S&F in repair 12mm thick plywood grade BWR, type BB fixed to timber frame work with nails / screw including dismantling of old plywood complete all as specified and directed.

M & L for cleaning and removing all scale and dirt, etc., from overhead PVC/RCC tank of capacity exc. 500 ltr but not exc. 1000 ltr each and from mouths of circulating pipes etc. complete all as specified and as directed.

M & L for cleaning and removing all scale and dirt, etc., from overhead PVC/RCC tank of capacity exc. 1000 ltr but not exc. 2000 ltr each and from mouths of circulating pipes etc. complete all as specified and as directed.

Cleaning 10 user septic tank by opening cover, pumping out sewage water and taking out accumulated night soil, sludge’s, brick bats or any other items, (both Solid and Liquid) and removing to a distance exc 5.00 Km but not exc. 10.00 Km, and buried under ground (minimum 300 mm below ground level), sprinkling bleaching powder on deposited sludge’s at pit including excavation of pits, returning, filling in and dress-ing of surplus soil/ground to slope as required, again spreading bleaching powder on filled earth and upto 1.00 metre around the trenches/pit not less than 500 grams per square metre, re-fixing the cover after cleaning of septic tank, complete all as specified and as directed by Engineer-in-Charge.

All as per serial item No. 44 here-in-above but 25 users, complete all as specified and as directed by Engineer-in-Charge.

All as per serial item No. 44 here-in-above but 50 users, complete all as specified and as directed by Engineer-in-Charge.

Cleaning manhole of any depth by opening cover and taking out accumulated brick bats, garbage, silts or any other items, removing and carrying same to a distance exc. 5.00 Km but not exc. 10.00 Km and buried under ground (minimum 300mm below ground level) including excavation of pits and returning, filling in and dressing of surplus soil ground to slope if required, re-fixing the cover after cleaning of manhole, complete all as specified and directed by Engineer-in-Charge.

Cleaning gully trap (manhole type) depth by opening cover and taking out accumulated night soil, sludges, brick bats or any other Items, removing and carrying same to a distance exc. 5.00 Km but not exc. 10.00 Km and buried under ground (minimum 300mm below Ground Level), re-fixing the Cover after Cleaning of gully traps including excavation of pits and returning, filling in and dressing of Surplus Soil, Ground to Slope if required, complete all as specified and directed by Engineer-in-Charge.

Cleaning of sewage line (of any dia) by roding from manhole, septic tank, gully trap etc with rods , bamboos, rotary cleaner etc. and well flushing with water, complete all as specified and directed by Engineer-in-Charge.

Cleaning of blockage of WHB, Kitchen sink, water closet, complete all as specified and directed by Engineer-In-Charge.

S&F in repair 110 mm bore (dia) PVC (SWR) cowl complete all as specified and directed by Engineer-in-charge.

M & L for pre-cast RCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in cover slab for manholes, septic tanks, etc. and set in cement mortar 1:4 incl dismantling of damaged RCC works complete all as specified and as directed by Engineer-in-Charge.

M&L deformed or twisted steel bars of 8mm dia and over, cut to length, bent to shape required, hooking ends and binding with MS wire (annelled) not less than 0.9 mm dia, complete all as specified and as directed by Engineer-in-Charge.

Demolition/breaking up drain Pipes (Salt Glazed stone Ware) 150mm bore (dia), Jointed in Cement mortar of any description including PCC packing and haunching to sides of the pipes with bed, complete all as specified and as directed by Engineer-in-Charge.

M&L 150 mm bore (dia) Salt-Glazed Stoneware (SGSW) drain pipe Grade ‘A’, laid in trenches as in foul condition, jointed in cement mortar 1:1 and tested, complete all as specified and as directed by Engr-in-Charge.

M&L PCC 1:3:6, type C-2 (using 40mm graded stone aggregate) as in concrete bed to drain pipe of 150mm dia, including packing under and haunching against the side of pipes after they are laid and tested, complete all as specified and as directed by Engineer-in-Charge.

Fixing only in repairs fushing Cistern and flushing pipe (exclusive of brackets ), complete all as specified and directed by Engineer-in-Charge.

S&F in repair CP GRATING DOOM 100mm dia , in floor including making good disturbed surfaces in cement mortar (1:3), complete all as specified and as directed by Engineer-in-charge.

S&F in repair Chromium plated health foucet with 30 inch long PVC flexible connection pipe and chromium plated brass nuts at both end including bracket, complete all as specified and as directed by Engineer-in-charge.

M & L for providing pre-cast cement concrete 1:2:4, type B-1, (using 20mm graded stone aggregate) as block masonry with solid blocks exc 10 cm in width and setting in mortar in 1:4 complete in walls.

M&L for 15mm thick rendering on fair faces of brick work or concrete surface in wall in cement mortar 1:6 finish even and smooth without using extra cement, complete all as specified and as directed by Engineer-in-Charge.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in walls in Cement Mortar 1:4, using WPC, finished surfaces even and smooth without using extra cement, complete all as specified and as directed by Engineer-in-Charge. (NOTE:- WPC shall be measured and paid separately under relevant item here-in-after)

Supply only integral water proofing compund conforming to IS and approved make, complete all as specified and as directed by Engineer-in-Charge.

S&F Factory made reinforced PVC Septic tank of capacity 2000 litre cleaning period 02 years, and laying in existing position as per manufacture's instruction after demolition of old unserviceable septic tank and connecting withe sewage pipe line, complete all as specified and as directed by Engineer-in-charge. Make : Supreme/ Sintex/Polycon/ Jindal/Astral/Finolex

Preparing New Plastered Surfaces of Walls and applying three coats of white wash complete all as specified and directed.

Taking down carefully Copper/ aluminium point wiring (light, fans, socket etc. ) complete including fixture and fittings such as switchs, ceiling roses, light fittings, regulators, socket light fitting etc. and making good the disturbed surface of wall / floor etc, complete all as specified and as directed by Engineer-in-charge.

M & L for point wiring with 1.5 sqmm FR grade PVC insulated cable as per IS-694 stranded copper conductor cable drawn through in and including PVC Conduit (not less than 20 mm wide) complete with all fittings and acessories including MS sunk box of thickness 1.6 mm and hylem sheet cover of 3 mm thick for mounting of switches, sockets, regulators, etc and 1.5 sq mm stranded copper conductor cable FR grade PVC insulated for earth continuity for one light point or one fan point controlled by one way switchcomplete all as specified and directed .

All as per Ser item No. 67 above but for One 5 amps socket point on independent board.

All as per Ser item No. 67 above but with 2.5 sqmm cable for 15 amps socket outlet on independent board complete all as specified and directed.

Supply and fix of ceiling rose surface backelite three terminals, PVC / polycarbonate, insulated body complete all as specified and directed.

Supply and fix switch piano flush type, 6 Amps 240 volts single pole one way, complete all as specified and as directed by Engineer-in-charge.

All as per Item No.71 here-in-above but 15 Amp. complete all as specified and as directed by Engineer-in-charge.

Supply and fix socket outlet, 3 pin 5 Amps, flush type, complete all as specified and as directed by Engineer-in-charge.

All as per Item No.73 but 15 Amp. complete all as specified and as directed by Engineer-in-charge.

S & F lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings completes all as specified and directed.

S & F LED light fitting 20 watts with LED tube rod 4 feet long suitable for single phase 230 volts, 50 Hz AC supply complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable of size 0.5 Sqmm (nominal area) completes all as specified and directed. Make : Cromption Cat No.- LDL-20-NW or equivalent in Philips/Wipro/GE

Supply and fix in repairs LED bulb, 09watt. completes all as specified and directed.

Supply and fix in repairs SP&N DBs, double door, 240 volt, 8 way complete all as specified and directed.

Supply and fix in repairs SP&N DBs, double door, 240 volt, 4 way complete all as specified and directed .

M & L for sub main wiring with two single core, 1.5 Sqmm, PVC insulated unsheathed cable multi-stranded copper conductor drawn through and including PVC casing capping of suitable size with all fittings and fixing accessories on roof, walls, ceiling etc including 1.5 Sqmm PVC insulated unsheathed single core solid copper conductor earth wire including taking down existing unserviceable sub main wiring and removing from site complete all as specified and directed. (Note: Two run of single core cable and one run earth wire will be measured as one length)

M & L for sub main wiring with two single core, 2.5 Sqmm PVC insulated unsheathed cable multi-stranded copper conductor drawn through and including PVC casing capping of suitable size with all fittings and fixing accessories on roof, walls, ceiling etc including 2.5 Sqmm PVC insulated unsheathed single core solid copper conductor as earth wire including taking down existing sub main wiring complete all as specified and directed. (Note: Two run of single core cable and one run earth wire will be measured as one length)

M&L for MCB single pole and neutral, 240 volts, 32 Amps, 10 KA completed all as specified and directed.

M&L for MCB single pole 240 volts 16 Amps, 10 KA completed all as specified and directed.

REPAIR TO ALMIRAH LARGE STEEL - (FD-1031)

S & F Locking Device including locking rods for Almirah large steel including removing of unservicable locking device complete as shown in drawing.

S & F Handle 150mm long,chromium plated for almirah large steel including removing of unservicable handle complete all as shown in drawing.

S & F lock of size 65 mmX55 mm universal type 6 lever made out of mild steel, powder coated for almirah large steel including removing of unserviceable lock complete all as shown in drawing.

REPAIR TO ALMIRAH MEDIUM STEEL - (FD-1032)

S & F locking device including locking rods for Almirah medium steel including removing of unservicable locking device complete all as shown in drawing.

S & F handle 150mm long, chromium plated for Almirah medium steel including removing of unservicable Handle complete as shown in drawing.

S & F lock of size 65 mmX55 mm universal type 6 lever made out of mild steel, powder coated for Almirah medium steel including removing of unserviceable lock complete as shown in drawing.

REPAIR TO TABLE CLERKS STEEL - (FD-1004)

S & F drawer of size 310 x 144 x 410mm made out of 1 mm thick mild steel sheet with all the necessery cutting, moulding, make hole welding etc., and apply two coat of synthetic enamel over a coat of red oxide primer with spray painting compressure including removing unserveciable drawer, complete as shown in the drawing.

S & F lock 3 way, 6 lever for table clerk steel including removing unserviceable drawer lock, complete all as specified in the drawing.

S & F PVC recess handle including fixing with self tapping screw, including removing unserviceable handle, complete all as specified in the drawing.

S & F hard rubber shoe 25mm X 25mm including removing unserviceable rubber shoe complete all as specified in the drawing.

REPAIR TO CHAIR CB STEEL WITH ARM :- (FD-75M)

S & F of seat of chair CB steel with arm of size 460x420x25mm made out of second class hard wood ,all as shown in the drawing, including weaving plastic cane of 2mm wide boarder with 3mm wide, half round type white Godrej pattern, fitting self on frame with slef tapping screw neatly, all the wooden exposed parts shall be french polish up to glossy finish or paint enamel black colour all as spacified and shown on drawing.

All as per serial item No. 103, above but back 460X370X25mm for chair CB steel with arm.

S & F handle for chair CB steel with arm made out of second class hardwood and apply french polish of black paint upto glossy finish complete all as specified and shown on drawing.

REPAIR TO CHAIR VARANDAH:- (FD-256)

Removing of old unservicable plastic cane from seat and back of chair Verandah and recanning of seat and back with 4mm wide half round plastic cane of best quality Godrej pattern,complete all as specified and shown on drawing.

S&F in repair hard plastic shoe complete all as specified and shown on drawing.

REPAIR TO GI Charpoy:- (FD-220)

S&F in repair ply wood of size 2000 mm x 900 mm x 12 mm for charpoy GI Pipe with 8 numbers of screw 65 mm with Nut and Washer complete all as specified/as shown on Drawing/as directed, (Make : Century / Kit Ply / Green ply)

M&L for removing bends setting broken /detached welds etc.of furniture, rejointby welding not exc. 100 mm in lenghth / Girth (Thickness ofmetal to be weld not exc. 6mm) including one coat of synthetic enamal paint over a coat of red oxide zinc chrome primer on effected repaired /welded portion to match with existing , complete all as specified as directed or as approved by engineer in charge.

PAINTING TO STEEL FURNITURE:- M & L preparing externel and internal surface of following steel furniture items including de-rusting /scratching, paste putty, sanding, etc. and applying two coat of synthetic enamelled paint of existing colour/required colour (1st grade quality) over a coat of red oxide zinc chrome primer, with spray paint machine complete all as specified and shown on drawing or as direcetd by engineer-in-charge.

Almirah Large Steel - (FD-1031)

Almirah Medium Steel - (FD-1032)

Rack Six tier Steel (FD-1038)

Chair CB Steel With Arm - (FD-75M)

Table clerk steel - (FD-1004)

Chair Varandah (FD-1106)

Chair steel with Arm cushioned, seat and back (FD-121M)

REPAIR TO BED PLY TOP (FD-246) M&L of new materials /components for following parts made to finishing to receive polish after removing /taking out carefully old unserviceable worn out/componentscomplete all as specified and directed and shown on drawing.

4 mm thick ply wood of head board teak face (one side)

4 mm thick ply wood of foot board teak face (one side)

Long Rail for Bed ply top made out of second class hard wood

12 mm thick ply wood of size 1890 mm x 900 mm bed top commercial

REPAIR TO TABLE WRITING (FD-275) Removing/Taking out carefully following old unserviceable worn out/components parts and replacement with new materials /components, made to shape finished to receive polish complete all as specified and directed and shown on drawing

Leg made out of 2nd Class hard wood complete all as specified and directed.

Stiffner made out of 2nd Classhard wood complete all as specified and directed.

Door shutter 18 mm thick plywood BWR grade with 1 mm thick laminated sheet fixed with adhesive and 4 mm thick 2nd class HW edging all around all as specified.

Drawer complete all as specified and shown on drawings.

Table top 1200 x 600 x 18 mm thick prelaminated particle board with 4 mm thick 2nd Class HW edging all around all as specified.

REPAIR TO TEAPOY (FD 278) Removing/Taking out carefully following old unserviceable worn out/components and replacement with new materials/components, made to shape finished to receive polish all as specified, directed and shown on drawing

Table Top 600 X 450 mm, 18 mm thick prelaminated particle board with 4 mm thick second class HW edging around.

Leg made out of 2 nd class hard wood complete all as specified and directed.

Necessary Side rail of 2nd class hard wood complete all as specified and directed.

REPAIR TO PEG TABLE (FD 236, FD 277) Removing/Taking out carefully following old unserviceable worn out/components parts and replacement with new materials/components, made to shape finished to receive polish all as specified, directed and shown on drawing

Table Top 450 X 300 mm, 18 mm thick prelaminated particle board with 4 mm thick second class edging al around complete all as specified and directed.

Leg made out of 2nd class hard wood complete all as specified and directed.

Side rail of 2nd class hard wood complete all as specified and directed.

POLISHING TO WOODEN FURNITURE Removing of all old faded out polish by polish remover/scrapper or by caustic soda or by any other means without damaging surfaces of furniture as listed below, making the surface smooth and free from dust and applying high gloss french polish till glossy/shine finish obtained all as specified and directed.

Bed plywood Top (FD-246)

Chair Easy (FD 229)

Chair Writing. (Drg No FD-250 & FD-280)

Chair Dining Long Back (SPL)

Peg Table ( FD 236, FD 277)

Sofa Set of 5 Seater (FD 281)

Stool dressing (FD 227, FD 282)

Teapoy (FD 278)

Table Centre ( FD 235, FD 274)

Table writing (FD 33, FD 275)

Table Dining 06 Pers (FD-273)

Hat Stand With Mirror (FD-362)

Side board (FD 241)

Chair Dining MAP (FD/MAP/02)

Table Bed Side (FD 275). Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of BOQ.

M/S DHAR AND DHAR

Bidder Name

NIHAR ENTERPRISE

M/S DHAR AND DHAR