Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.1 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹19.3 L+₹2.9 L (17.4%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹20.7 L+₹4.3 L (26.0%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹23.3 L+₹6.9 L (42.0%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹24.3 L+₹7.8 L (47.7%)Rejected-Finance | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
29 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Jammu
Air Force Station Jammu
CA NO GE/AFJ-18/2022-23 WELCOME MAINTENANCE TO SMQs/OMQs AT AF STN JAMMU UNDER GE (AF) JAMMU
2022_MES_549127_1
CA NO GE/AFJ-18/2022-23
Open Tender
Civil Works
Item Rate
330 days
Jammu
As per tender documents
8 documents required · 8 mandatory
₹500
GE (AF) Jammu
₹50,000
Yes
23 Dec 2022
1 Sept 2022
1 Oct 2022
1 Sept 2022
29 Sept 2022
15 Sept 2022
Amount
Dismantling existing unservicable floor/wall tiles of any description including bedding/screed layer complete in all respect as directed by Engineer-in-Charge.
M&L for colored non skid ceramic tiles 7to 8 mm thick, area of each tile exc 0.06 sqm but n exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:6 to match Shade, pattern, laying etc of tiles complete all as specified.
M&L for colored non skid ceramic tiles 7to 8 mm thick, area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:6 to match Shade, pattern, laying etc of tiles complete all as specified.
M&L Vitrified tiles light shade 9 to 10 mm thick (Square or rectangular ) polished , area of each tiles exc 0.36 sqm but not exe 0.42 sqm , in floors etc laid over 15mm thick screed bed in CM 1:4 set and jointed in neat cement slurry and pointed in white cement to match complete all as specified.
M&L for 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) as in cooking plateforms, counter type WHB and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust admixture of pigment to match with shade of granite& moulding the edges complete all as specified.
M&L for 300x200 x7 mm thick glazed ceramic tiles colored as in dado/ skirting and vertical surfaces set&jointed in neat cement slurry and pointed in colored cement over and incl 10 mm thick cement mortar 1:4 to match the Shade, pattern, laying etc of tiles complete all as specified.
M&L for 300x450 x7 mm thick glazed ceramic tiles colored as in dado/ skirting and vertical surfaces set&jointed in neat cement slurry and pointed in colored cement over and incl 10 mm thick cement mortar 1:4 to match the Shade, pattern, laying etc of tiles complete all as specified.
Taking down cement plaster of any description including racking out joint hacking for key scrubbing down with water etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 15 mm rendering in CM 1:6 on fair face of wall or on concrete surfaces finished even and smooth without using extra cement complete all as specified.
M&L rendering 15mm thick in cement mortar 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified.
M&L rendering 5mm thick in cement plaster 1:3 on ceiling surface finished even and smooth without using extra cement complete all as specified.
M&L for making good the surfaces of chajja/Facia/ roof projection etc visible with reinforcement or not by providing PCC 1:2:4 type B-0, including with cement plaster 1:3 and necessary formwork scaffolding required (hight of builing not exc 8m)complete all as specified and as directed by Engineer-in-Charge.
Taking up or down steel tubing for 15mm dia pipe and connections including cleaning for re-fixing or removal to store complete all as specified and as directed by Engineer-in-Charge.
S & F repair 15mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors complete all as specified.
Description all as per item no.14 above re fixing onlycomplete all as specified.
Taking up or down steel tubing for 20mm dia pipe and connections including cleaning for re-fixing or removal to store complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs 20mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete all as specified .
Description all as per item no.17 above re fixing only complete all as specified .
Cutting chases,pinning for concealed water tubing and making good to facing where required and pointing in cement mortar 1;3 ,cutting exc 10cm but n.exc 20cm girth complete all as specified and as directed by Engineer-in-Charge.
Dismantling unservicable /cracked water tanks and removing from site capacity exe 250 ltr n.exe 500 ltr complete all as specified and as directed by Engineer-in-Charge.
Description all as per Item no.20 above but 1000 Ltrs capacity complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repairs Rotational moulded polythene water storage tanks (cylindered vertical closed top ) hoisted and fixed in position all as spd in SSR Part –I of capacity of tanks 500 ltr complete all as specified.
Description all as per Item no.22 above but 1000 Ltrs capacity complete all as specified and as directed by Engineer-in-Charge.
S&F in repair PVC seat cover for EWC white colour complete with MS Hinged chromium plated complete all as specified .
S&F in repair PVC valve less, syphonic action type flushing cistern, low level with inlet, ball valve float and handle including brackets of capacity 10 ltrs incl PVC flush pipe complete all as specified .
S&F in repairs wc seat vitreous china Orissa pan of pattern, long pan size 580x440mm , with ‘P’ or ‘S’ trap, front or back inlet and integral foot rest complete, including lime concrete bedding and connection to drain or outgoing pipe and to flushing pipe, and anti siphon pipe complete all as specified .
S&F in repairs vitreous china wash hand basin, white , flat back, size 580 x 450 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand complete all as specified .
S&F in repairs vitreous china wash down water closet pan ( pedestal pattern ) white complete including ‘P’ or ‘S’ trap , seat cover and fixing to flushing cistern, brackets, flushing pipe etc complete all as specified .
S&F in repair 32mm dia pipes PVC of low density with socket suitable for waste pipe of WHB fixed to waste fitting complete all as specified .
Description all as per Item no.29 above but waste coupling 40mm dia suitable for sink etc complete all as specified.
S&F in repairs bib tap 15mm PTMT any colour high pressure screwed down for iron pipe and fixed ( Minimum weight 90gms) complete all as specified.
S&F in repair CP grating 125mm dia as suitable to existing trap as per requirement complete all as specified.
S&F glass shelf of CP railing fixed with and including Chromium plated brass screws and plastic cleats ( Minimum weight 300 gms) complete all as specified.
S&F Liquid soap container of CP any colour fixed with and including Chromium plated brass screws and plastic cleats ( Minimum weight 105 gms) complete all as specified.
S&F CP toilet paper holder any colour fixed with and including Chromium plated brass screws and plastic cleats complete all as specified.
S&F Towel Ring of CP any colour fixed with and including Chromium plated brass screws and plastic cleats ( Minimum weight 90 gms) complete all as specified.
S&F Towel Rail 600mm long of CP any colour fixed with and including Chromium plated brass screws and plastic cleats ( Minimum weight 190 gms) complete all as specified.
S and F in repair 15mm dia bib tap fancy type CP with crutch or butter fly handle screwed down screwed for Iron Pipe or brass ferrule and fixed complete all as specified.
Description as per Item no.38 above but in repair long nose Bib tap 15mm bore Cromium plated(CP) complete all as specified.
S&F in repair pillar tap fancy type CP with Capston Head CP screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nut screwed for Iron pipe and fixed 15mm dia complete all as specified.
S and F in repairs Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x330mm x 160mm complete all as specified.
Supply and fixing in repair cast copper alloy 15mm dia stop cock screwed down high pressure with crutch or butter fly handles screwed both and iron pipe or for unions and fixed complete all as specified.
Supply and fixing in repair stop cock long shank and cup (concealed Type)15mm bore Chromium plated(CP) complete all as specified.
Supply and fixing in repair angle valve cast copper alloy chromium Plated (CP) 15mm dia screwed down high pressure with crutch or butter fly handles screwed both and iron pipe or for unions and fixed complete all as specified.
Supply and fixing fixed in repair 15mm dia 450mm long PVC connection with PTMT nut and washer complete all as specified.
Supply and fixing fixed in repair 15mm dia 600mm long PVC connection with PTMT nut and washer complete all as specified.
Supply and fixing in repair shower rose 150mm dia chromium plated with arm suitable for 15mm dia pipe (as per sample approved by Engineer-in-Charge )complete all as specified.
S&F in repair Brass CP Central Hole wash basin mixer for hot and cold for 15mm bore complete fixed to connection complete all as specified.
S&F in repair Brass wall mixer/sink mixer for hot and cold for 15mm bore complete fixed to connection complete all as specified.
Kitchen plate rack, including shelves, made of stainless steel not less than 1mm thick with fixing acessories, overall size 900 mm x 900mm x 250 mm, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.
PVC Mirror with cabinet shelf including screws and fixing on wall complete all as specified and directed by Engineer-in-Charge.
S& F in repairs CP brass jet nozzle with 600 long PVC connection for EWC incl fixing device complete all as specified and directed by Engineer-in-Charge.
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in all respect as specified in position complete all as specified .
S & F glass corner shelf with steel railing complete all as specified and directed by Engr in Charge.
S & F stainless steel towel rack heavy duty 600 mm complete all as specified and directed by Engr in Charge.
Taking down eaves gutters and rains water pipes (any size or pattern), incl cleaning or refixing or removal to store complete all as specified and directed by Engineer-in-Charge.
S&F in repair rain water pipe 110mm dia with single socket joints fixed to wall with stack clamp complete all as specified and directed by Engineer-in-Charge
Supply and fixing in repair bends (any radius) dimension pieces or tapers (Large bore measured) 100mm dia all as spd and directed by Engg-in-Charge
S&Fin repairs stack clamp cut of 50 x 5mm flat iron and 16mm dia round iron stays including bolt and nuts and securing ends of stay to water pipes suitable for 100 mm dia pipe including taking down unservicable clamp complete in all respect as directed by Engineer-in-Charge.
Taking down wooden shutter of any dscription n.exc 1.00 Sqm ,easing and adjusting and than refixing shutters with old builder hardware as required in the same opening complete in all respect as directed by Engineer-in-Charge.
Description all as per item no.61 above exc. 1 Sqm but n.exc 2.00 Sqm each complete all as specified and directed by Engineer-in-Charge.
Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutter from the frame) and removing to or from store complete all as specified and directed by Engineer-in-Charge.
Taking down chowkats or frames exc 1.5 sqm but n exc 4.0 sqm each with shutters (without taking off shutter from the frame) and removing to or from store complete all as specified and directed by Engineer-in-Charge.
S & F factory made solid PVC moulded door shutter 28-30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat frame shall be covered with heat moulded plain color PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail : paneling of plain color PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed to gether with solvent cement, supplying & fixing in the frame at site as per specification given in SSR Part-1 clause 8B.2.1 & drawing as on page 146 all as specifed and as directed by Engineer-in-Charge.
S & F solid PVC Door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening as per specification and drawing complete all as specified and directed by Engineer-in-Charge.
S & F Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, Butt hinges, lock strike plate, etc complete, size of frame 105x60mm incl bottom of each chowkat to be welded with 2 nos 25x25x3mm thick flat iron projecting 10 cm on either side and back fill to chowkats with PCC 1:3:6 type C-O using 12.5 mm graded crushed stone aggregate complete all as specified .
Description all as per item no.67 above but size of frame 125x60mm complete all as specified .
S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified .
S&F factory made PVC guage door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement,0 but Single Side Prelam PVC sheet used instead of Plain colour PVC sheet and stile & rails having one side feathered edge and on other side 10mm 900 bent edge but wire gauzed i.e. panel will be of wire gauze in lieu of single side prelam PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S.tubes. The wire gauge shall be stretched to tighten firmly complete all as specified.
S&F 35mm thick factory made flush Shutters, solid core construction, with pre-laminated particle board, exterior grade, prelaminated both sides with decorative choice laminations complete all as specified .
M&L for factory made Box type steel windows with side hung shutters including hinges with steel handles, two Nos of tower bolts in each leaf with glazing bars complete with factory priming coat complete all as specified.
M&L Steel ventilator with top hung shutter including hinges, steel peg stay, handle tower bolt etc complete all as specified .
M&L framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work comforming to Fe.290.Gde-E-165 complete all as specified .
Supply and fixing in repair prelaminated particle board 18/19mm thick interior grade,prelaminated one side with decorative choice lamination and other side balancing white lamination type fixed with screws to timber framework complete all as specified .
Supply and fixing in repair continuous (piano) hinges mild steel bright finish width of flap 40 mm (when open) complete all as specified .
Taking down loose existing unseviceable pelmets boxes including removing of wooden gutties/MS clips and making good with in cement mortar 1:3 complete all as specified and directed by Engineer-in-Charge.
S&F MS PVC coated brackets made inshape and size to hold certain rods and size of bracket 150mm colour and Pattern approved by Accepting Officer complete all as specified and directed by Engineer-in-Charge.
S&F MS PVC sheathed 20mm dia drapery rod of approved pattern and shade complete all as specified and directed by Engineer-in-Charge.
S&F end balls made in conical surface and coated with brown/cherry/Golden colour dia of ball not less than 50mm and suitable for curtain rod of 20mm dia complete all as specified and directed by Engineer-in-Charge.
S&F rounded block made in round shape and coated with brown/cherry/Golden colour suitable for curtain rod 20mm dia complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair door seal 1.5mm thick strip of mild steel with hard brush fixed in door bottom complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair 125mm hasp & staple safety type of aluminum with mild steel hinge including bolt to hinge plate and fixed with screw all as specified (ISI Marked)complete all as specified .
Supply and fixing in repair ball catcher with 8 mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified .
Hacking out old broken glass (any thickness size/ quality description) from metal frame including punching or drilling out old glazing pin/spring clips and providing and fixing new one complete all as specified and directed by Engineer-in-Charge.
Supply and fixing 3.00mm thick sheet plain glass ordinary quality and glazing with oil putty/ wooden beads with nails in square n.exe 0.5 Sqm in each pane complete all as specified .
Description all as per item no.86 above but figured type pin headed glass complete all as specified .
Supply and fixing in repair Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and fixed with tinned tacks of galvanised wire staple to steel windows/fixed with wooden beads of 2nd class HW to wooden doors/windows complete all as specified.
Supply and fixing in repair GI wire cloth 0.63mm nominal dia wire and average width of aperture 1.4mm and fixed with tinned tacks of galvanised wire staple to steel windows/fixed with wooden beads of 2nd class HW to wooden doors/windows complete all as specified .
Supply and fixing MS stove enameled black stay(left and right) for steel window 30cm long with nut and washer fixed in repair complete all as specified and directed by Engineer-in-Charge.
Supply and fixing MS stove enameled black handle of 150mm size for steel window left/right with nut and washer fixed in repair complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair aluminum anodized barrel tower bolt of extruded section 200 mm long complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair Aluminiun anodised barrel tower bolts of extruded section of size 100mm complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair MS butt hinges medium weight cold rolled 100 mm ISI marked complete all as specified incl. required welding etc in repairs complete all as specified and directed by Engineer-in-Charge.
Description all as per item no.94 above but 75mm long complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair aluminum alloy handle 125 mm size cast type complete all as specified.
Supply and fixing aluminum anodized sliding door bolts 250 mm long with hasp and staple (bold type) complete all as specified (ISI Marked) fixed in repair complete all as specified .
S&f in repair glass putty including taking down old putty and rubbing & cleaning of old steel window frame and glass and refixing the same glass on window etc complete all as specified .
M&L preparation of new plastered surfaces of wall priming with alkali primer and applying two coats of cement based paint complete all as specified .
Preparation of new plastered surfaces of wall and applying two coats of oil bond distemper with oil emulsion over a coat of 3mm wall putty complete all as specified .
M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified .
Preparation of old plastered surfaces of wall and applying two coat of cement base paint incl complete removal of existing treatment complete all as specified .
Preparation of old plastered surfaces of wall and applying one coat of white wash on old surfaces of ceiling complete all as specified .
Preparation of old plastered surfaces of wall and applying one coats of white wash on walls complete all as specified.
Preparation of old plastered surfaces of wall and applying one coat of Distemper oil emulsion any tint on walls, filling gaps by putty after washing rubbing down and stopping of distempered surfaces complete all as specified .
Prepration of old plastered surfaces of wall and applying two coat of Distemper oil emulsion any tint on walls, filling gaps by putty after washing rubbing down and stopping of distempered surfaces complete all as specified .
Complete removal of existing treatment and applying two coat of distemper oil emulsion any tint on walls,over 3mm thick wall care putty complete all as specified .
M & L, for complete removal of existing treatment on walls and preparation surfaces of walls and applying two coats of weather proof coat premium exterior emulsion (water based) paint of any shade complete all as specified .
Preparation of old decorated surfaces of wood or wood based material of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified .
Preparation of old decorated surfaces of steel or iron works of any description exc 10 cm over width or girth and applying one coat of synthetic enamel paint complete all as specified .
M&L for preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified .
M&L for preparation of new wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint in any tint over a coat of pink wood primer complete all as specified .
SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.
Note: (1) The repair has to carried out as and when required basis and accordingly site will be available in piecemeal wise and as directed by Enginer-in-Charge in the Air Force station area
M/s Sunny Gupta
JK BUILDERS AND DEVELOPERS
M/S Shesh Paul Gupta
M/S MOHAN LAL SHARMA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .