Providing Installation of Pure Drinking water Unit at Santhemaralli Sub Market Yard of A.P.M.C Chamarajanagara Approved Under 2024-25 Annual Action Plan

Providing Installation of Pure Drinking water Unit at Santhemaralli Sub Market Yard of A.P.M.C Chamarajanagara Approved Under 2024-25 Annual Action Plan

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils to any dep...

Providing and laying in position Cement Concrete Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/trap/basalt cru...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) etc., complete with all leads & lifts, all incidental charges, as per drawing and ...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing and laying in Cement Concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Basement & surface level works, return walls, retaining walls, sunken floors e...

Providing and laying in position Cement Concrete M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Super structures of building , Road works, Water works, Irrigation wo...

Providing and laying in position Cement Concrete M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Super structures of building , Road works, Water works, Irrigation wo...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth etc., comple...

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...

Providing and laying of 600x600 mm size vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all col...

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint ...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lin- ing, including cost of materials, labour, curing etc., ...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 25 mm nominal dia pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :

25 mm nominal bore etc., complete with all leads & lifts, all incidental charges, as per drawing and ...

Water purification plants: Providing, Installation and Commissioning of Cabin Type 250 LPH automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase po...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe 19/20mm dia 2mm thick. confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe 25mm dia 2mm thick. confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before co...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe 40 mm dia 2.5 mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before...

Supplying and fixing 200x200x65mm sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc., complete with a...

Supplying and fixing 25mm deep junction box sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc., compl...

Extra for Groove cutting upto 50mm conduit in brick wall to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface etc., complete with all leads & lifts, all...

Extra for Groove cutting upto 50mm conduit CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface etc., complete with all leads & lifts, all incid...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, 1.5 sqmm multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with sp...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, 2.5 sqmm multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with spe...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, 4 sqmm multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with speci...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, 6 sqmm multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with speci...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting 3 Way modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C ...

Supplying and fixing superior quality 3 Module modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the e...

Supplying and fixing .6-32 A DP. miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit...

Supplying and fixing Double Door.8 Way SP & N regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type ca...

Supplying & fixing of 16Amps Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. etc., complete with all leads & lifts, all incidental charges, as pe...

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20Amps single phase Class-1 Accuracy with Temper Proof Energy Meter etc., complete with all leads & lifts, all incidental charges, a...

Supply and Installation / Fixing / Provision of Outdoor type 300mmx300mmx214mm Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust p...

Supplying of 1 x4 feet - PVC Batten with integrated LED tube 20/22W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & ...

Fixing all types and all capacities of fluorescent / false ceiling/ spot light / CFL / LED fittings indoor on the wall / ceiling /rafters / girders using 23/0.0076” twin twisted PVC insulatedwires, ...