CA NO GE (W)/HSR-16/2026-27 SPL REPAIR TO BLDG NO P-675 UNDER GE (W) HISAR AT HISAR MIL STN

Taking down chowkats or frame with shutter, without taking off shutter from the frames not exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frame with shutter, without taking off shutter from the frames area exc 1.5 sqm but not exc 4sqm each complete all as specified and directed.

Taking down shutters of any description area exc 1.0 sqm but n exc 2.0 sqm complete all as specified and directed.

S&F pressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including Cement concrete 1:3:6 type C1 (20mm graded stone aggregates) for filling of pressed steel frame and hold fast block cutting etc complete all as specified and directed.

S&F pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc Cement concrete 1:3:6 type C1 (20mm graded stone aggregates) for filling of pressed steel frame and hold fast block cutting etc complete all as specified and directed.

S&F 35mm thick factory made plain framed, paneled shutter made of 2nd class HW (Bonsum/Hollock) of 35 mm thick(two panels)with lock rail and panel of 12 mm veneered particle board with commercial veneering on both faces. The size of rail and styles as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick glazed and skelton shutters open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred breds for securing glass etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.20(a) in 2nd class hard wood complete all as specified and directed.

M&L preparation of new wooden surface of any description and applying two coats of synthetic enamel paint over one coat of pink primer, over 10cm width or girth complete all as specified and directed.

M&L preparation of old wooden surfaces of any description and applying a coat of synthetic enamel paint over 10cm width or girth complete all as specified and directed.

Providing & fixing double rebate ventilators fabricated from roll framed sections made of galvanised steel color coated / powder coated (base steel as per IS 513 "D" quality galvanised as per IS 277 with Zinc of 120 gms /Sqm) with total coated thickness of 0.60 mm complete all as specified and directed. Paint Specification : coated section should be with primer coat of epoxy primer of 5-7 micron thick , finish painted with polyester paint of 12-16 micron thick or powder coated with pure polyester up to 50 -60 micron thick. Dimension of Sections:sections for frame should be of 72 x 55 mm , section for mullions should be of 72 mm x 50 mm ,section for shutter frame should be of 47mm x 20 mm ,section for fixed glass bead should be of 12mm x 12 mm ,and section for fly mesh should be of 40 mm x 20 mm Fixing Details: section for frame glazed shutter and wire mesh shutter should be cut to length and miter jointed with poly propylene corner brackets , mullion section should be joined with frame / mullion using mullion cap Ethyl Propylene Damien Monomer (EPDM) Gasket should be used all around glass in shutter and fixed glass spoon Profile should be used around Fly mesh to fix mesh in mesh shutter. Accesories:- Each Glazed shutter and mesh shutter should be provided with SS Pivot Hinges -1 set ,seccolor Handles & seccolor Stay Window Frame Should be Fixed to Brick/ Concrete masonary by using Nylon self Expanding Caps and driving MS electroplated 80 mm long screws into the caps through frame solid square guard bars shall be provided between glazed shutter and mesh shutter and the same shall be measured and paid separately the above said rates are inclusive of 5mm thick plain float glass &SS wire mesh Note:- if one ventilation has two or more sub partitions then half or more than half of the ventilators shall be double rebated openable and remaining shall be fixed type and all as spd and directed as per ground requirement .