CERTAIN LBW, MW AND RW AT MIL STN SRI GANGANAGAR

Amount

Dismantling of Brick tiles or terracing tiles , single layer on roofs complete all as specified and directed by Engineer-in-Charge.

Demolition of old mud phuska, removing rubbish of the premises cleaning surface and preparing to receive new mud plaster complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:2:4 type B1(20 mm graded stone aggregate) as in roof padding/kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed by Engineer-in-Charge.

M&L Providing and applying APP based polymeric membrance minimum 3mm thick reinforced with polyster non wove fabric (wt n.less than 150gm/sqm) land on primed surface by forced application keep overlap margin for minimum 100mm heat both the overlaps and use round tipped trowel to seal overlap excess compound shold be smoothened and pressed into seam using hot trowel and including & applying a coat of bitumen based primer @ 3-5 sqmtr/ltr and including & Applying evenly a tack coat of glass fibre bitumen felt grade-2 at the rate of 1.20 Kg per sq.m. including cleaning surfaces with wire brush / coir brush to freee from all loose materials like dust, dirt ect and make wattah / coving of 75x75 mm with PCC 1:2:4 type B1 at all horizontal and vertical joints to avoid right angle turning complete all as specified and directed by Engr-in- charge.

Dismantling water tank capacity exc 250 Ltr and n exc 1000 ltr complete all as specified and directed by Engineer - in - Charge.

S&F rotational moulded polyethylene water storage tank 500 ltrs capacity three layered (Cylindrical vertical with closed top) hoisted and fixed in position and including 20mm bore PTMT ball valve, high pressure with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule (minimum weight 210gms) complete all as specified and directed by Engineer - in - Charge. (Note : The PVC tank shall be ISI marked & having two layer)

S&F rotational moulded polyethylene water storage tank 1000 ltrs capacity three layered (Cylindrical vertical with closed top) hoisted and fixed in position and including 25mm bore PTMT ball valve, high pressure with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule (minimum weight 455gms) complete all as specified and directed by Engineer - in - Charge. (Note : The PVC tank shall be ISI marked & having two layer)

Taking up or down for 20mm bore steel water tubing galvanised with connection including cleaning for refixing complete all as specified and directed by Engineer - in - Charge.

S&F steel water tubing galvanised 20mm bore, “medium grade” with all fittings fixed to wall and ceiling or in floor complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 09 here in before but fixing with new fittings only complete all as specified and directed by Engineer - in - Charge.

S&F steel water tubing galvanised 25mm bore, “medium grade” with all fittings fixed to wall and ceiling or in floor complete all as specified and directed by Engineer - in - Charge.

Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan – necks, etc. including cleaning of any description complete all as specified and directed by Engineer - in - Charge.

M&L for mild steel bands straps supports or stays for rainwater ventilating pipes including bolts confirming to Fe 290 Gde E-165 all as specified and directed by Engr-in-charge.

S&F 110mm bore PVC (SWR) rain water pipe single socketed in any length with rubber ring joints, jointed with solvent joint fixed to wall complete all as specified and directed by Engineer - in - Charge.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed by Engineer - in - Charge.

Taking down cement plaster of amy description on bricks or concrete surfaces of walls including racking out joints, hacking for keys scrubbing down with water etc. complete all as specified directed by Engr-in-Charge.

M&L 15mm thick, rendering in cement mortar CM 1:4 to brick/concrete wall surfaces in two layers first layer 10mm thick and second layer 5mm thick with WPC 3% by wt of cement finished even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M & L for applying two coats of Premium Acrylic Smooth exterior paint (Apex) on newly plastered external surfaces of wall including one coat of wall care putty (1.5mm thick) complete all as per direction of Engineer in charge. Work will be carried out by mechanical means.

M & L for applying two coats of Premium Acrylic Smooth exterior paint (Apex) over one coat of primer over one coat of wall care putty (1.5mm thick) including preparation of old external wall surfaces complete all as per direction of Engineer in charge.

M&L 15mm thick, rendering in cement mortar 1:6 to brick/concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L two coats of Acrylic emulsion on newly pastered wall surfaces over one coat of wall care putty (1.5mm thick) including preparation of surfaces complete all as specified and directed by Engineer in charge.

M&L 5mm thick, rendering in cement mortar 1:3 to ceiling surfaces on patches finished even and smooth without using extra cement in patches complete all as specified and directed by Engr-in-Charge.

M&L one coat of Acrylic emulsion paint on newly pastered ceiling surfaces over one coat of wall care putty (1.5mm thick) including preparation of surfaces complete all as specified and directed by Engr-in-Charge.

S & F for Wire netting of galvanised steel wire 1.40mm dia, mesh size 20mm fixed with tinned tacks of wire staples complete all as specified and directed by Engr-in-Charge.

Taking down and refixing old 40mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar ( 1:3) mixed with 5 % of cruide oil by weight of cement complete all as specified and directed by Engineer-in-Charge.

Dismantling of RCC as in Roofs/Parrapet wall, floors ( other than ground floors), beams, RCC water tank, staircases, landing, chajjas and similar suspended work complete all as specified and directed by Engineer-in-Charge.

Dismantling of brick work built in cement mortar of any description complete all as specified and directed by Engineer - in - Charge.

M&L brick work with sub class 'B' Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed by Engineer - in - Charge.

M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6 complete all as specified and directed by Engineer - in - Charge.

S & F for 20mm dia Gun metal , gate or globe valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

S & F for 25mm dia Gun metal , gate or globe valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

Excavating in post holes in soft/loose soil (or similar holes) each n exc 0.5 cum getting out, returning filling in and ramming with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed by Engineer in charge.

M&L PCC 1:2:4 (40mm graded stone aggregate) type B2, in foundation of posts and struts complete all as specified and directed .

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240 complete all as specified and directed .

M&L mild steel work as in framed work i.e. Angle iron/flat iron including caps , bases, splices, all lattice bars, cutting tops to shape, drilling holes, notching for wire etc conforming to Fe-290 grade E-165 complete all as specified and directed by Engr-in-Charge.

S & F for Rolled mild steel in plates ( plain or chequered ) channels, square cut or notched ( ordinary and counter sunk) forming holes , without any attachment conforming to Fe-290 grade E-165 complete all as specified and directed by Engr-in-Charge.

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

S&F for Pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick for Ridge of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

M&L two coats of synthetic enamel paint (ordinary tint) over one coat of red oxide primer exc 10 cm width /girth on new steel surfaces including preparation of surfaces complete all as specified and directed by Engr-in-Charge.

S&F mild steel screw bolts (machine made) with hexagonal or square head at one end, screwed end to be fitted with washer and one hexagonal/ square nut not exceeding 5cm long complete all as specified and directed by Engr-in-Charge.

M&L for 25 thick cement concrete flooring type B-0 1:2:4 (12.5 mm graded stone aggregate) finish even and fair complete all as specified and directed by Engr-in-Charge.

M&L machine cut Kota stone slab flooring 18-20 mm thick laid over & including 20 mm thick screed base in cement 1:4, laid and jointed with grey cement slurry mixed with pigments to match the shade of the slabs including rubbing, rounding of edges (moulding of edges) and mirror polishing complete all as specified and directed by Engr-in-Charge.

All as per above item No-42 but in vertical surfaces like dados or skirting laid over & including 10mm thick rendering in CM 1:4, set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer - in - Charge.

Surface excavation n.exc 30cm deep and averaging 15cm deep and geeting out in any type of soil complete all as specified and directed by Engineer - in - Charge.

Excavating over area n exc 1.5m deep and getting out in Soft/loose soil complete all as specified and directed by Engineer - in - Charge.

M & L for applying two coats of Premium Acrylic Smooth exterior paint (Apex) with one coat of primer on new plaster wall external surfaces as per manufacturers instruction complete all as specified and directed by Engr-in-Charge.

M&L for 75mm thick Cement concrete type D-2 , 1:4:8 (40 mm graded stone aggregate) as in sub base of floor complete all as specified and directed by Engr-in-Charge.

M&L precast machine pressed rubber moulded coloured concrete interlocking paver blocks any shape and sizeconfirming to IS 15658-2006 of 60 mm thickness, M -35 grade,set,jointed & pointed in neat cement slurry in floor/pavings/path etc with grey cement and pigment including 25mm thick sand cushioning complete all as specified and directed by Engineer - in - Charge.

M&L providing precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in block masonry with solid blocks exceeding 10 cm width and setting as in kerb stone complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.50 Mtr in depth for foundation, etc., not exceeding 10 Sqm on plan in soft /loose soil; & getting out in any type of soil complete all as specified and directed by Engineer - in - Charge.

M&L for PCC as in foundation filling and mass concrete type D-2 1:4:8 (40mm graded stone aggregate) complete all as specified and directed by Engineer - in - Charge.

Returning, filling in, including spreading, leveling, watering and well ramming in soft/loose soil in layer not exceeding 25 cm thick complete all as specified and directed by Engineer - in - Charge.

Removing excavated material (Soil) outside MOD land all as specified and directed by Engineer - in - Charge.

M & L for Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work in flat for fair finished surface complete all as specified and directed by Engineer - in - Charge.

M & L for Form work to column for fair finished surface of concrete all as specified and directed by Engineer - in - Charge.

M&L for Form work to sides and soffits of floor and roof Beam etc complete all as specified and directed by Engineer - in - Charge.

M&L for Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) complete all as specified and directed by Engineer - in - Charge.

M&L for RCC Design mix M-25 (using 20mm graded stone aggregate ) as in foundation including raft, footings, foundation beams, plinth beam and the like complete all as specified and directed by Engineer - in - Charge.

M&L for RCC Design mix M-25 (using 20mm graded stone aggregate ) as in Column complete all as specified and directed by Engineer - in - Charge.

M&L for RCC Design mix -25 (using 20mm graded stone aggregate ) as in lintel beam and roof beam complete all as specified and directed by Engineer - in - Charge.

M&L for RCC Design mix M-25 (using 20mm graded stone aggregate ) as in slabs suppotred on walls, beams and columns complete all as specified and directed by Engineer - in - Charge.

M&L for RCC Design mix M-25 (using 20mm graded aggregate ) as in chajjas and similar work complete all as specified and directed by Engineer - in - Charge.

S & F for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed by Engineer - in - Charge.

S&F for mild steel TMT bars 5mm dia. and over up to and including 10 mm dia. in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia complete all as specified and directed by Engineer - in - Charge.

S&F for Heat Resistant Terrace tiles (300mm X 300mm ) X 8-10mmthick with SRI (solar refractive index) more than 78 on waterproof and sloped surface of terrace laid on 15mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio 1:1, including providing skirting upto 150mm height along the parapet walls in the same manner complete all as specified and directed by Engr-in-Charge.

M&L Hardcore of broken stone or boulders, gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface all as specified and directed by Engr-in-charge.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm laid in floor set and jointed in cement slurry laid over & including 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finish even & fair and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engr-in-Charge.

M&L glazed ceramic coloured tiles, (600x300)x7mm thick as on vertical surfaces like dados or skirting laid over & including 10mm thick rendering in CM 1:4, set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer - in - Charge.

S & F factory made of Fiberways Brand or equivalent Fiber Glass Reinforced plastic (FRP) Door Frames of three legged of cross section 90mmx45mm having single rebate of 32mmx45mm having single rebate of 32mmx15mm to receive shutter of 30 mm thickness. The laminate door frame molded with fire retardant grade unsaturate polysterresinn and chopped mat.Doorframe laminate shall be 2 mm thick and shall be filled with suitable wooden black in all the three legs. The frame shall be covered with fiberglass from all sides MS stay shall be provided at the bottom to steady the frame.complete all as specified and directed by Engineer - in - Charge.

S & F factory made of fiberways brand 30mm thick glass fiber reinforced plastic (FRP) paneled door shutter of required color and approved brand and manufacture made with fire retardent grade unsaturated polyster resin moulded to 3mm thick FRP laminated for forming hollow rails and style with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings cast monolithically with 5mm thick FRP laminate for panels for conforming to IS:14856-2000 complete all as specified and directed by Engineer - in - Charge.

S&F 100 mm Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type C-21 all as specified and directecd by Engr-in-charge.

S & F aluminium handles cast type anodised, 150mm long complete all as specified and directed by Engineer - in - Charge.

S& F aluminium anodised barrel tower bolts of extruded section and fixed 150 mm size complete all as specified & directed by Engineer in charge.

S&F Aluminium frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc complete with powder coating on Aluminium minium thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawl plug and screw or with fixing clip or with expansion hold plate fasteners . Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required all complete as per the direction of Engineer-in-charge

S&F Aluminium window and ventilator shutters, fixed type without sash bar, aluminum section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, powder coated aluminium snap beading screws, powder coated aluminium fitting such as hinges type B-21 100 mm size (2 Nos), suitable handle (2 Nos) of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed by Engr-in-Charge.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed by Engineer - in - Charge.

S&F Aluminum Grill any pattern fixed with Aluminum Frame complete all as specified and directed by Engr-in-Charge. Note- Aluminum frame shall be Measured and paid seperately

M&L for 75mm thick Cement concrete type C-2 , 1:3:6 (20 mm graded aggregate) as in plinth protection laid in bay n.exc 2.5m length complete all as specified and directed by Engr-in-Charge.

M&L 20 mm thick granite(Approved colour) table moulded and polished machine cut in jambs,pillars ,skirting/dado, sehlves etc laid over 15 mm thick cement mortar 1:3 screed set and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing polishing complete all as specified and directed by Engr-in-Charge.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engineer - in - Charge.

S & F for stainless steel tubular towel rail 20mm dia “D” type 60 cm long between flanges including brackets complete all as specified and directed by Engineer - in - Charge.

S&F water closet vitreous china squatting pan "Orrisa pattern" size 580mmx440mm white with integral foot rests (Excl flushing cistern) including all joints and making good to the floor complete all as specified including 100mm bore CI 'P' trap/S trap all as specified and directed by Engr-in-charge.

S&F PVC low level flushing cistern 10 lirs capacity, valve-less, syphonic action type, white, with inlet, ball valve, float, and handle including brackets, PVC connections 15 mm size with PTMT nuts of length 450 mm ,including 32mm bore flush pipe of polyethylene of low or high density of PVC complete all as specified and directed by Engineer - in - Charge.

S&F vitreous china urinals, full stall type flat back complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe including waste pipe, PTMT spreader and trap complete all as specified and directed by Engg in charge.

S&F vitreous china wash hand basin, oval type white flat back of size 550mmx400mm including brackets, 32mm bore brass chromimum plated waste coupling & 32mm bore low density ployethylene (LDPE) flush pipe of pressure rating 6Kgf/Sq cm (1.00 M long) complete, including 15mm bore 450 mm length PVC connection with PTMT nuts complete all as specified and directed by Engr-in-Charge.

Supply only swan neck type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure of 15 mm bore diawith or without lettered Hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer in charge.

S & F long body bib taps with wall flange 15mm dia, cast copper alloy chromium plated, fancy type with crutch or butterfly handle, screwed down screwed for iron pipe complete all as specified and directed by Engineer-in-charge.

S&F Grating doom 100mm dia PTMT (minimum weight 25gms) complete all as specified and directed by Engineer - in - Charge.

S&F Angle valves, chromium plated cast screwed down, high pressure copper alloy, with crutch or butterfly handles, screwed both ends for but fancy type 15mm bore iron pipe or complete all as specified and directed by Engineer - in - Charge.

S&F steel water tubing galvanised 15mm bore, “medium grade” with all fittings and fixed to walls and ceiling or in floor complete all as specified and directed by Engineer - in - Charge.

S & F for 20mm dia Gun metal , gate or globe valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S & F for 25mm dia Gun metal , gate or globe valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F soap dish brass glossy finish complete all as specified and directed by Engr-in-Charge.

S&F 100mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed by Engineer - in - Charge.

S&F 75mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed by Engineer - in - Charge.

S&F 100mm bore cast iron bends sand cast (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and directed by Engineer - in - Charge.

S&F 75mm bore cast iron bends sand cast (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified and directed by Engineer - in - Charge.

M&L for CI floor trap 75 mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified and directed by Engr-in-charge.

M & L for Concrete bed to drain pipes including packing under , and haunching against the sides of pipes after they are laid and tested ;in cement concrete 1:3:6 type C-2 for 150mm bore dia of pipe complete all as specified and directed by Engr-in-Charge.

S & F for 150mm bore (internal dia) RCC class NP2 pipe, grade ‘A’, laid on concrete bed to required slope, jointed and tested complete all as specified and directed by Engr-in-Charge. (concrete bed shall be measured and paid for separately).

Construction of manhole internal size 60cm X 60cm with brick work including RCC manhole cover complete all as specified in TD and directed by Engr-in-charge

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-Charge.

M&L 100mm thick Cement Concrete (1:4:8) type D-2 using 40mm graded stone aggregte as in sub base complete all as specified and directed by Engineer-in-Charge.

M&L 50mm thick Cement Concrete (1:2:4) type B-1 using 20mm graded stone aggregte as in flooring incl finishing the concrete surface smooth & even without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L Glass dividing strip 3mm thick and width of strip 38mm inserting in position complete all as specified and directed by Engineer-in-Charge.

M & L for concealed conduit point wiring complete for light on independent /combine board with cable 1.5 sqmm (Nominal area) FRLSH PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , after cutting in wall chasing for conduits and sinking's for sunken cast iron/ pressed steel terminal boxes 60mm deep ,suitable length and 1. 2 mm thickness for mounting, switches, sockets,fan regulator with 3 mm thick plastic laminated sheet cover fixed with brass screwed and cup washers, duly grouting and painted with red oxide metal primer and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and direced by the Engineer in charge.

All as per Srl item No. 108 here in before but for one switch socket combinationt 6 pin 5/ 15 Amps on independent board with copper conductor 4 Sqmm complete all as specified and directed by Engineer - in - Charge.

S & F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp complete all as specified and directed by Engineer - in - Charge.

S & F switch piano flush type 5/6 Amps single pole one way complete all as specified and directed by Engineer - in - Charge.

S & F ceiling rose surface bakelite three terminals complete all as specified and directed by Engineer - in - Charge.

S & F Exhaust fan made of sturdy Engineering plastic complete with Louvers shutter,voltage 230 V,50 Hz, 900 RPM, Copper winding of sweep 250 mm, complete all as specified and direced by the Engineer in charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer - in - Charge.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer - in - Charge.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer - in - Charge.

S & F sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 8 ways, 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge.

S & F MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 32 Amps , single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.

S & F MCB ‘C’ series type suitable for 240 volts, AC supply 40 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.

M & L for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of plate not less than 1.5 Mtr below ground level , connecting to GI earth lead 4 mm dia GI earth wire ,by means of bolts,nuts and washers of GI and protection by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 gs /Sqmm ) and frame of angle iron 25mmX25mmX6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape ,GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40 mmX 8 mm FI with fixing arrangement ,funnel, wire mesh and earth work inhard dense soil ,returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electric plate no.3 of SSR part 1 and connecting to earth test point all as specified and directed by Engr -In - Charge

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth for laying of cables in soft/loose soil including taking up or down the LT cable complete all as directed

Supply and filling in Sand for Cable protection complete all as specified and directed by Engineer - in - Charge. Note : The punning thickness i.e. 18 cm shall be measured for payment.

Supply and lay standard size bricks subclass B type complete all as specified and directed by Engineer - in - Charge.

Supply and lay jointing and testing and commissioning in replacement of 6 Sqmmx 2 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by engineer in charge.

Supply and lay GI pipe 50 mm bore light grade for cable protection in walls trenches or any situation including clamp nut bolt etc complete all as specified and directed by Engineer-in-Charge.

Note :(i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.

R B Infrabuilders (BID ID -3067867)

PAREEK AND COMPANY (BID ID -3067121)

M/s Chopdar Builders (BID ID -3073680)

M J BUILDERS (BID ID -3077166)

KHANNA CONSTRUCTIONS (BID ID -3076641)