REPAIR/MAINT OF OVER HEAD LT LINES TO UG CABLE AT GURDEEP ENCLAVE AND NEARBY OFFICERS QUARTERS AREA AT FARIDKOT MIL STN

Amount

Supply and laying XLPE insulated armoured heavy duty electric cable 400 Sqmm 3.5 core with aluminium conductor Multi standard cable 1100 volts grade in trenches ducts, pipe on walls, poles complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 01 here-in-before but 240 Sqmm 3.5 core complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 01 here-in-before but 185 Sqmm 3.5 core complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 01 here-in-before but 150 Sqmm 3.5 core complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 01 here-in-before but 95 Sqmm 3.5 core complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 01 here-in-before but 35 Sqmm 3.5 core complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 01 here-in-before but 16 Sqmm 4 core complete all as specified and directed by Engineer-in-Charge.

Supply, install testing and commissioning CPRI approved weather and vermin proof LT feedar pillar box factory fabricated outdoor type totally enclosed made out of 3.15 mm thick sheet metal enclosure of suitable size, with angle iron frame of MS angle 40 X 40 X 6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 Hz system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement consisting suitable and sufficient nos circular cable entry holes at bottom only with suitable PVC/rubber bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly powder coated (15 micron) grey hammer tone with one coat of including connecting with LT armoured incoming and outgoing cables and including required sizes of cable lugs and angle iron stand of height not less then 2.5 Feet from above ground level with earth work PCC fountation and other connected items complete all as specified and directed and consisiting of following :- (a) Aluminium bus bar of 600 Amp current rating capacity, length as actually required at site for 3 phase and neutral, mounted on epoxy/FRP bus bar insulator (b) MCCB 400 Amps 4 Pole 36 KA, 415 V - 01 No. for incoming. (c) MCCB 315 Amps 4 Pole 36 KA, 415 V - 04 Nos outgoing (d) Digital mutifunction meter for indicating of current, voltage with necessary CTs etc - 01 No (e) MCB TPN 40 Amps 16 KA 415 Volts - 01 No (f) MCB SPN 40 Amps 10 KA 415 Volts - 02 Nos (g) 3 phase digital timer switch with contactors for auto switch on-off of street lights- 01 set (h) LED type indicator lamp Red/Yellow/Blue colour-01 set (j) Necessary internal wiring with copper conductor incl lugs and thimbles.

Supply, install testing and commissioning CPRI approved weather and vermin proof LT feedar pillar box (Panel board) factory fabricated outdoor type totally enclosed made out of 3.15 mm thick sheet metal enclosure of suitable size, with angle iron frame of MS angle 40 X 40 X 6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 Hz system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement consisting suitable and sufficient nos circular cable entry holes at bottom only with suitable PVC/rubber bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly powder coated (15 micron) grey hammer tone with one coat of including connecting with LT armoured incoming and outgoing cables and including required sizes of cable lugs and angle iron stand stand of height not less then 2.5 Feet from above ground level with earth work PCC fountation and other connected items complete all specified and directed and consisiting of following :- (a) Aluminium bus bar of 400 Amp current rating capacity, length as actually required at site for 3 phase and neutral, mounted on epoxy/FRP bus bar insulator (b) MCCB 315 Amps 4 Pole 36 KA, 415 V - 01 No for incoming. (c) MCCB 63 Amps 4 pole16 KA, 415 V - 06 for outgoing . (d) TPN 40 Amp 16 KA 415 Volts - 01 Nos (e) SPN 40 Amp 10 KA 415 Volt 4 Pole -02 Nos (f) 3 phase digital timer switch with contactors for auto switch on-off of street lights- 01 Set (g) Digital mutifunction meter for indicating of current, voltage etc with necessary CTs - 01 No (h) LED type indicator lamp Red/Yellow/Blue colour-01 set (j) Necessary internal wiring with copper conductor incl lugs and thimbles.

Supply, install testing and commissioning CPRI approve dweather and vermin proof LT feedar pillar box (Panel board) factory fabricated outdoor type totally enclosed made out of 3.15 mm thick sheet metal enclosure of suitable size, with angle iron frame of MS angle 40 X 40 X 6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 Hz system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement consisting suitable and sufficient nos circular cable entry holes at bottom only with suitable PVC/rubber bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly powder coated (15 micron) grey hammer tone with one coat of including connecting with LT armoured incoming and outgoing cables and including required sizes of cable lugs and angle iron stand stand of height not less then 2.5 Feet from AGL with earth work PCC fountation and other connected items complete all specified and directed and consisiting of following :- (a) Aluminium bus bar of 200 Amp current rating capacity, length as actually required at site for 3 phase and neutral, mounted on epoxy/FRP bus bar insulator (b) MCCB 160 Amps 4 Pole 25 KA, 415 V - 01 No for incoming. (c) MCCB 63 Amps 4 pole 16 KA, 415 V - 02 for incoming (d) SPN 40 Amp 10 KA 415 Volt 4 Pole -02 Nos (e) LED type indicator lamp Red/Yellow/Blue colour-01 set (f) Necessary internal wiring with copper conductor incl lugs and thimbles.

Supply, install testing and commissioning CPRI approved weather and vermin proof LT feedar pillar box (Panel board) factory fabricated outdoor type totally enclosed made out of 3.15 mm thick sheet metal enclosure of suitable size, with angle iron frame of MS angle 40 X 40 X 6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 Hz system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement consisting suitable and sufficient nos circular cable entry holes at bottom only with suitable PVC/rubber bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly powder coated (15 micron) grey hammer tone with one coat of including connecting with LT armoured incoming and outgoing cables and including required sizes of cable lugs and angle iron stand stand of height not less then 2.5 Feet from above ground level with earth work PCC fountation and other connected items complete all specified and directed and consisiting of following :- (a) Aluminium bus bar of 100 Amp current rating capacity, length as actually required at site for 3 phase and neutral, mounted on epoxy/FRP bus bar insulator (b) MCCB 63 Amps 4 Pole 16 KA, 415 V - 01 No for incoming. (c) LED type indicator lamp Red/Yellow/Blue colour-01 set (d) Necessary internal wiring with copper conductor incl lugs and thimbles.

Disconnecting, dismantling and taking down carefully ACSR conductor from poles of LT any size and setting a side complete all as specified and as directed.

Dismantling/ taking down old cross arms, clamps, braces etc of any section from pole including nuts, bolts, washers complete all as specified and as directed.

Dismantling insulators any type, any size complete all as specified & directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying pipes and getting out in soft/loosse soil all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm all as specified and directed.

Removing the excavated soil from the trench n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as specified and directed.

Supply and laying double wall corrugated pipe (DWC), non-metallic, Resistance to Compression : Type 450, Resistance to Impact: Normal, Resistance to Bending : Pliable, Resistance to External Influence: Ingress Protection : IP 67, Resistance against Corrosion : Without Protection, Resistance to Flame Propagation : Non Flame Propagating, Nominal outside diameter 77 mm, minimum inside dia 63 mm conforming to IS 16205 (Part 24) : 2017 complete all as specified and as directed.

Supply and laying double wall corrugated pipe (DWC), non-metallic, Resistance to Compression : Type 450, Resistance to Impact: Normal, Resistance to Bending : Pliable, Resistance to External Influence: Ingress Protection : IP 67, Resistance against Corrosion : Without Protection, Resistance to Flame Propagation : Non Flame Propagating, Nominal outside diameter 120 mm, minimum inside dia 103 mm conforming to IS 16205 (Part 24) : 2017 complete all as specified and as directed.

M&L Earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI strip 32 x 6 mm as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end 20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1 complete all as specified and directed and testing on completion.

Supply and fixing of hot press moulded SMC (Sheet Moulding Compound) junction box of inside dimention 210 mm x 190mm x 95mm including 4 Nos aluminium stud terminal of suitable size and one no MCB SP 2.5 amps and fixed on pole with clamps, bolts and nuts with pole complete with two coat of synethictic enamel paint powder coated as provided by manufacturer all as specified and directed.

S&F PVC insulated multi stranded copper conductor cable 1.5 sqmm two core and making connections of street light complete all as specified and directed.

S&F in replacement LED street light 60 watt with aliminium housing toughned glass IP-66 weather protection complete all as specified and directed.

S&F GI Pipe 80mm bore light grade and including GI Fitting in Trenches/on Wall or Laying in floors complete all as specified and directed .

S&F GI Pipe 50mm bore light grade and including GI Fitting in Trenches/on Wall or Laying in floors complete all as specified and directed .

Material for labour for drilling / boring of holes (horizondal ) under main road pavment hard standing or any other situation my manual or trenchless technology mean for accommodate 100mm bore GI tube (light grade) in the drilling holes,including returniong filling in the end working space including removal of surplus soil and making good the surface complete all as specified and as directed. Note: GI Pipe and UG cable shall be measured and paid separately.

Material and labour for cable route path indicators made out of precast PCC mark LT cable 1100 V having PCC pillar of size 700mmx220mmx80mm, embedded 300 mm below ground level with PCC 1:3:6 (Type C1 using 20mm above ground level incl colour paint above ground level complete excavation and earth work complete all as specified& directed.

ROYAL BUILDERS (BID ID -3503141)

M/S RAJESH KUMAR and CO. (BID ID -3507242)

mehar buildcon (BID ID -3508494)

M/S BSS AND SONS (BID ID -3508474)

V R TRADERS (BID ID -3508574)

Dashmesh Construction Company (BID ID -3508641)

GOURAV M ENTERPRISES (BID ID -3508691)