REPAIR TO ROOF, FALSE CEILING AND FLOORING AT MADGAON UNDER GE PANAJI GOA.

Amount

Dismantling asbestos cement (corrugated/semi corrugated etc) sheet in roof covering complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

Dismantling timber scantlings of fillets rails,posts rafters, purlins etc under 40 sqcm in section in framed work complete all as specified and as directed.

Material and labour for 6mm thick asbestos cement corrugated sheets in roof fixed with ‘J’ type or ‘L’ type or cranked hook bolts complete all as specified and as directed.

Material and labour for 6mm thick asbestos cement two piece adjustable plain wing ridge fixed with ‘J’ type or ‘L’ type or cranked hook bolts complete all as specified and as directed.

Supply and fixing for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based plain sheet steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fix rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to quality 'A', Fe-290 (Gde E- 165) complete all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description, over 10cm in width or girth complete all as specified and directed.

Dismantlig/ taking out existing hessain base felt or any other water proofing treatment from roof including cement plaster and exposing top surface of RCC slab complete all as specified and directed.

Dismantaling of single layer Manglore pattern roofing tiles bedded in cement mortar complete all as specified and directed.

Dismantaling Manglore pattern roofing tiles with ceiling tiles or slate roofing bedded in cement mortar complete all as specified and directed.

Material and labour for roughening surfaces of old concrete floor or roof by picking, sweeping, clean and washing down with water and remove dust and applying normal treatment using glass fibre base bitumen felt, grade2 with priming the surface by using bitumen Vg-30 @ 1.2kg/sq.m complete all as specified and directed.

Material and labour for bitumastic gola, with Vg-30 bitumen and coarse sand mixture 1:3 by weight, 8cm x 8cm at the junction of roofing to vertical surfaces complete all as specified and directed.

Laying only existing Manglore pattern roof tiles, inter locking at side joints laid dry complete all as specified and directed.

Laying only existing Manglore pattern ceiling tiles, inter locking at side joints laid dry complete all as specified and directed.

Material and labour for Manglore pattern roof tiles, inter locking at side joints laid dry complete all as specified and directed.

Material and labour for Manglore pattern ceiling tiles, inter locking at side joints laid dry complete all as specified and directed.

Material and labour for 40mm thick cement concret 1:2:4, type B0, (12.5mm graded aggregate) as in sub base floors, roof slab, etc. mixed with using water proofing compound complete all as specified and as directed. (Water proofing compound shall be measured and paid for separately)complete all as specified and directed.

Material and labour for rendering 15mm thick plaster on concrete surfaces with cement mortar 1:3, mixed with using water proofing compound finished even and smooth witht using extra cement slurry @ 3.00Kg/Sqm complete all as specified and as directed. (Water proofing compound shall be measured and paid for separately)

Material and Labour for preparation of roof surface by throughly wire brushed, washed, dried up, cleaned of all the foreign matter and dust, and applying bitumenous primer @ 250 gms/sqm, and then laying 4mm thick APP modified bituminous membrane with non woven polyester matt as reinforcement weighting not less than 3.5Kg per sqm, laid on primed surface with torch application method by providing overlap minimum 100mm on logitudinal and 150mm on transerve direction,and finishing the surface with solar reflective bituminous aluminium paint at the rate of 100 grams per sqm with preparation of treated surfaces, all angles and similar projections should be sealed well with extra care to ensure full bondage, all joints and changes in direction should be curved with cement mortar 1:3 mixed with SBR Latex @ 200ml/bag of cement.

Material and labour for 15mm thick plaster in CM 1:3 with URP modified mortar including preparing surface with wire brush, washing and laitance remove of all loose particles followed by washing the surface clear water with high pressure jet all as completed, including injucting of crack with crackfiller solvent of 1st grade quality than providing two coats of shalicryl 215 UV resistant elastomeric roof coating over shaliurethane BTD bituminous modified elastomeric liquid membrane over polyster reinforcement over priming coat complete all as per manufactures instruction and directed by the engineer in charge. Name of manufracture :- Pidlite, Shalimar, Sikka, MC-Bauchemie, Texsa etc or equivalents. Note : The work shall be executed through manufracturer applicator.

Dismantling of ceiling boards of any description and at any position (fiber, pulp, insulation, etc.) or insulation boards/slabs/blankets any thickness, including cover fillets and grid frame work all as complete all as specified and directed .

Supply and fix GI hangers of 6mm dia (up to 1200mm length) adjusting level fixed to iron frame work by making holes for holding GI wire or fixed by means of ceiling cleats made out of GI flat 40mm x 3mm size, 60mm long complete all as specified and directed.

Supply and fix anodized aluminium snap grid frame work for false ceiling of grid size 605mm x 605mm with size of main tee 30mm x 25mm x 1.5mm and cross tee 25mm x 25mm x 1.5mm and supporting angles at the ends all along the wall 40mm x 25mm x 2mm complete all specified and directed.

Material and labour for 6mm thick non asbestos fibre cement building boards fixed or laid/ inserted to aluminium frame work with screws complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) all as specified and directed.

Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including supports,overhangs,etc. also splays between floors and beams, etc for rough finished surface complete all as specified and directed.

Material and labour for cement concret type B0, 1:2:4 (12.5mm graded aggregate) as in floors, roofs, kerbs, beam etc complete all as specified and directed.

Material and labour for 75 mm thick cement concrete1:3:6, type C2,(using 40 mm stone aggregate) finished even & smooth without using extra cement as in plinth protection etc. complete all as specified.

Demolition of brick work or stone/boulder masonary, built in cement mortar including all quoins,arches,pillars,etc. complete all as specified and directed by Engineer in charge.

Material and labour for for walling laterite of squared rubble, regular coursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed by Engineer in charge.

Extra over laterite stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of squared rubble masonary regular coursed complete all as specified and directed.

Taking down cement or cement lime plaster of any description including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Material and labour for rendering 15mm thick plaster in cement mortar 1:4 on external surfaces such as stone masonry surfaces mixed with using water proofing compound finished even and smooth without using extra cement complete all as specified and as directed. (Water proofing compound shall be measured and paid for separately)

Material and labour for rendering 15mm thick plaster on stone masonry surfaces with cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 10mm thick plaster on concrete surfaces of ceiling, soffit of chajja and roof projection or other similar works with cement mortar 1:3, finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for applying two coats of weather proof acrylic emulsion exterior paint over a coat of weather proof acrylic emulsion exterior primer including preparation of new plastered surfaces of walls complete all as specified and directed.

Material and labour for applying two coat of oil emulsion distemper white or tinted over a coat of chalk whiting as preparatory to distemper including preparation of new plastered surfaces of wall by rubbing with arasive paper and dusted off complete all as specified and as directed.

Material and labour for applying 3 coat of white wash including praparation of new plastered surfaces of ceiling complete all as specified and directed.

Supply only Integral water proofing compound of complete all as specified and directed.

M/S. SURAJ FAL DESSAI