Construction of One Notoilet block for ladies and repair of 03 No existing toilets in Irrigation Compex Jammu

Removing dry or oil bound distemper by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. Metres and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 Metres lead.

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in :Cement mortar 1:6 (1 cement : 6 coarse sand).

Extra for brick work in superstructure above plinth level upto floor V level.

Half brick work with FPF bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 ( 1 cement : 4 coarse sand).

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiralstair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angles 40x40x6mm for diagonal braces .

Centring and shuttering including strutting, propping etc. and removal of form for:removal of form for : Lintels beams plinth girders bressumers and cantilevers

Suspended floors, roofs, landings, balconies and access platform.

Edges of slab under 20 cm

12MM cement plaster of mix ( 1:4 ) 1 cement : 4 coarse sand.

Painting with synethetic enamel paint of approved brand and manufacture to giv en an even shade . Two or more coat.

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm

Walls painting using acrylic emulsion paint to given shade on new work ( two more coat).

Providing gola ( Angular fillet 75x75mm in cement conc. 1:2:4 ( 1 cement : 2 coarse sand 4 stone aggregate 10MM and down guage ) including finishing with cement mortar 1:3 ( 1 cement 3 fine sand) as per standard design : 75x75Mm deep chase.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 50 mm thick with 20mm nominal size stone agg.

Dismantling tile work in floors and roofs in cement mortar including stacking material within 50M lead for thickness of tiles 10Mm to 25MM.

Providing and fixing Ist quality ceramic glazed walls tiles conforming to IS : 15622 ( Thickness) to be specified by manufacturer ) of approved maked in all colours shades except burgundy, bottle green, black of any size as approved by Engineer in charge in skirting risers of steps and dados over 12MM thick bed of cement mortar 1:3 ( 1 cement 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and lahing ceramiz glazed tiles 300x30 Mm ( thickness) to be specified by the manufacturer ) of ist quality conforming to IS : 15622 of approved makev laid on 20MM thick bed of cement cement mortar 1:4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigmenet etc complete in colour such as white, ivory ,grey ,fume Red brown.

Providing and fixing G.I pipes complete with G.I fittings and clamps including cutting and making good the walls etc ( internal work).

Providing and fixing G.I piles complete with G.I fittings including trenching and refilling etc ( external work)

Making connection of G.I distribution branch with G.I main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc complete 25 to 40Mm nominal bore.

Provdiing and fixing rectangular high density polyethylene water storage lift tank with cover conforming to ISI 12701 colour of opaque white or as approved by Engineer in charge.The rate includes making necessary holes for inlet outlets and over flow pipes. The base support inchaarge fitting and fixtures for tank shall be paid separately.

A)Providing and fixing brass stop coack ( 15MM nominal bore)

(B)Providing and fixing 15MM nominal base CP brassd bib cock 1:S 8931

Providing and fixing 15MM nominal bore Cp brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Providing and fixing 15MM nominal bore CP angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing round shape counter wash basin of approved quality resting on granite platform ( jet black granite) and CP brass exposes part kit of Joystick basin mixer wall mounted consisting of operating lever cartridge sleeve walls glange, nipple and spount including divertor premium quality of 15Mm nominal bore cost includes CP brass waste waste couplingall accessories complete jobwaste couplingall accessories complete job

Providing and fixing white vitreious china European type wall hung WC pan with 100MM P or S trap concealed tank hand shower for toilet and all fittings etc complete including fitting in position in wall complete job.

Providingv and fixing wash basin with C.I brackets 15MM dia CP brass single hole basin mixer of approved quality and make including painting of fittings and brakets cutting and making good the walls whereever required.(A) white vitreious china wash basin size 550x400MM with a 15MM CP brass single hole basin mixer .Add providing 32MM dia C.P brass trap.

Providing and fixing white vitreous china pedestral for wash basin completelyh recessed at the back for the reception of pipes and fittings.

Providing and fizxing PVC waste pipe for sink or wash basin including PVC waste fittings complete.

Providing and fixing 60x450MM levelled edge mirror of superior glass of approved quality complete with 6MM thick hard board ground fixed to wooden cleats with CP brass screws and washers complete.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement: 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominalsize), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III): 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mmthick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete asper standard design :Inside size 90x80 cm and 45 cm deep including C.I. cover withframe (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg andweight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiralstair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more

Centring and shuttering including strutting, propping etc. and removal of form for:removal of form for: a)Suspended floors, roofs, landings, balconies and access platform.

Centring and shuttering including strutting, propping etc. and removal of form for:removal of form for: a)Edges of slab

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

Providing and fifxing PVC trap self cleaning design 100MM inlett and 100 outlet.

Providing and fixing PVC bend of size 110MM.

Providing and fixing PVC single TEE without door 100 MM dia.

Providing and fixing CP soap dish.

Providing and fixing CP Towel ring.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:Range of three urinal basins with 10 liter white P.V.C automatic flushing cistern.

Providing and fixing CP cup

Providing and fixing CP Grating.

Providing and fixing 600x200 MM glass sheld with anodised aluminium angle frame C.P. brass brackets and guard rail of standard size.

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-Charge and finished smooth.Granite Stone of approved shade

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in- charge: 1:3:6 or richer mix (i/c equivalent design mix)

Providing and laying cement concrete 1:5: 10 ( 1 cement : 5 coarse sand : 10 graded stone aggregate 40MM nominal size) including bed concrete as per standard design .allaround 100MM dia.

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion .Powder coated aluminum

For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. Pre-laminated particle board with decorative lamination on both sides.

Add.provision for electric work ( To be paid as per LMR)

Carriage of sand and Bajri for average distance 10 Km by MT.

Carriage of brick for average distance 10 KM by MT.