SPECIAL REPAIR TO SMQS AT VIMAN NAGAR UNDER GE (AF) LOHEGAON AT AIRFORCE STATION PUNE

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving's not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L cement concrete type B0 1:2:4 (12.5 mm graded agg) 25mm thick as in sub floors complete all as specified and directed.

M & L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.

M&L for joint free non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm in floors {Superior/Premium quality}, set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.

Ditto all as per Ser Item No 5.00 above but as in skirting/dados over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for joint free Glazed Ceramic Coloured Tiles, 450X 300X 7mm thick in size, set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick rendering in cement mortar 1:4 Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incluidng rubbing and polishing complete including screed bed 15mm thick in cement motar 1:6 complete all as specified and directed.

M & L for machine cut Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with 10mm thick plaster in CM 1:4 complete all as specified and directed.

M&L for granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade incl 15mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6 complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 15mm dia

S&F for GI tubing 15mm dia medium grade with all fittings & fixed to walls & ceiling or laid in floors complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 20mm dia

S&F for GI tubing 20mm dia medium grade with all fittings & fixed to walls and ceiling or laid in floors complete all as specified and as directed.

S&F in repair vitreous china, squatting pan of 'Orissa' pattern, long pan, size 580 mm x 440 mm, white, with 'P' of 'S' Trap, front or back inlet and foot rests any pattern, including concrete bedding complete all as specified and as directed.

S&F in repair 15 mm dia CP brass PVC connection 60 cm long including check nuts etc complete all as specified and directed

M&L in repair for 15 mm bore bib tap chromium plated cast copper alloy with wall flange complete all as specified and directed

S & F in repair PVC low level flushing system plastic valve with inlet ball valve float chain and ball (of capacity 10 liters) ISI Marked incl 32mm PVC flush pipe complete all as specified and directed

S&F in repair vitreous china wash hand basin, white, 550 mm x 400 mm flat back, including providing and fixing CI brackets, CP Pillar Tap, PVC waste pipe 32mm dia, chromium plated, brass, waste coupling, iincl 32 mm dia all as specified and as directed.

S & F in repair angle valves fancy , cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed.

S &F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges all as specified and directed.

S &F in repair Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed.

S &F in repair 15mm dia stop valves cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed (concealed type) all as specified and directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, waste pipe and coupling and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as specified and directed.

S & F in repair Towel Ring of chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) all as specified and directed

S&F CP soap case all as specified and directed

S&F in repairs stainless steel kitchen plate rack of 0.65 mm thick of approved make with plugs, washers, over all size 610mmx 760mm x 254mm complete all as specified and directed.

Demolition and breaking up drain pipes Upto 150 mm (Salt glazed ware /PVC/ AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as specified and directed.

Ditto all as per Ser Item No 31.00 above but 110mm dia complete all as specified and directed.

M&L for PVC (SWR) bends of any radius with oval and access door of 75mm dia

Ditto all as per Ser Item No 33.00 above but 110mm dia complete all as specified and directed.

S &F 110mm dia of PVC (SWR) branch piece with access door, single T, equal or unequal all as specified and directed.

S &F 75mm dia of PVC (SWR) branch piece with access door, single T, equal or unequal all as specified and directed.

M&L for PVC (SWR) vent cowl of 110mm dia complete all as specified and directed.

S&F in repair PVC SWR floor trap of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S & F Grating doom 100mm dia of Stainless steel with holes for waste pipes all as specified and directed.

S & F Grating doom 100mm dia of stainless steel all as specified and directed.

Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-charge

M & L for 6mm thick slope or flat ceiling board, on non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws all as specified and directed.

M&L for powder coated aluminium snap grid size 605 x 605 mm frame work for false ceiling and hangers 6mm dia G. I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed.

Dismantling of Single layer Mangalore pattern or similar tiles in roofing complete all as specified and directed by Engineer in Charge.

Dismantling of Battens for tiles, shingles etc, of any size including tilting fillets complete all as specified and directed by Engineer in Charge.

Dismantling timber scantlings 40 sq. cm and over in section, Framed work in any position spaced n.exc 15 cm complete all as specified and directed by Engineer in Charge.

Supply and fix rolled mild steel as roof trusses (framed) purlins (angle, beam, tee channel) incl distance piece, cleats etc of Fe-410W (Gde E-250 quality A) with and including necessary cutting bending drilling holes welding, rebates etc, complete all as directed by Engr-in-Charge.

Supply and fix Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc of Fe-410W (Gde E-250 quality A) with and including necessary cutting bending drilling holes welding, rebates etc, complete all as directed by Engr-in-Charge.

M&L for plain cement concrete type B1 1:2:4 (20mm graded stone aggregate) as in copings.

S&F pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F pre painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Taking down chowkat with shutter without taking out shutter from the frame exc 1.5 and n.exc 4 Sqm each

Taking down chowkat with shutter without taking out shutter from the frame n.exc 1.5 Sqm.

Taking down chowkat with shutter without taking out shutter from the frame n.exc 1 Sqm.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as directed .

Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and as directed.

S&F 200 mm long, barrel tower bolts of extruded section complete all as specified and as directed.

S & F 100 mm size Butt hinges, medium weight, cold rolled mild steel, and fixed all as specified and directed.

Supply only 100 mm size Butt hinges, medium weight, cold rolled mild steel, and fixed all as specified and directed.

S & F Stainless steel Butt hinges 100 mm long complete all as specified and directed

S & F 75 mm size Butt hinges, medium weight, cold rolled mild steel, and fixed all as specified and directed.

S&F 150 mm long, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150 mm size handles, Extruded aluminium alloy handles, abricated type, anodised complete all as specified and as directed.

S&F 300 mm long MS sliding door bolt, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length 150 mm fixed in floor complete all as specified and as directed .

S & F for 300 mm, MS ordinary rat tail rod pattern Helical door springs including roller and roller plate complete all as specified and directed.

S &F of 125mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed.

S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

M & L for 165mm x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and directed.

M & L for 105mm x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and directed.

M & L for Providing, cement concrete type B0, 1:3:6 (12.5 mm graded aggregate)for chawkat filling as required all as specified and directed by engineer in charge.

M & L for Factory made of 35 mm thick glazed and skeleton shutters made of 2nd class hard wood, open rebated and prepared to receive glass gauge edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass etc for window, ventilator shutters, etc. as specified in SSR Part I, Section 8 clause 8.24(b) and fitted to chowkhat complete all as specified and directed .

M & L for Factory made of 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides: supplied and fitted to chowkats complete all as specified and directed .

S&F 3.0 mm thick figured glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq mtr in each pane complete all as specified and as directed.

S &F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete but without glazing bars, dovetailed or welded all as specified and directed.

S&F 3.0 mm thick plain sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq mtr in each pane complete all as specified and as directed.

S&F Stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S &F Steel windows with side hung shutters including box type side hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and directed.

S & F Steel windows or ventilators,Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

M & L for 18 MM thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber and nails for storage almirah to the sizeand as directed by Engr-in-charge.

M & L for 12mm thick plywood BWR grade type BB fixed with fevicol and nails for working table / storage almirah to the size and as directed by Engr-in-charge.

M&L for II nd class H.W. plain cover fillets square, rectangular or triangular in section bull nosed, splayed chamfered or rounded on one edge or face in II nd class H.W. sectional area exc 3 sqcm and n. exc. 6 Sqcm.

S & F Stainless steel Harrison rail 20 mm Dia(Curtain rod) complete all as specified and directed

S& F fancy type CP brackets for curtain rods with 1mm thick plate complete all as specified and directed

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate as in sub base of floor and path, plinth protection etc.complete all as specified and directed.

M&L Forming Contraction (Dummy) joints 30 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'A' in plinth protection

M&L for precast solid cement concrete block masonry exc 10cm in width built with solid blocks Grade C1 (1:3:6 mix) and set in CM (1:6).

Taking down cement plaster on brick/stone/concrete surface including wall tiling and hacking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L rendering 15mm thick on surface of brick work/concrete surface in CM 1:4 and is to be finished even and smooth with out using extra cement complete all as specified and directed.

M & L for 5mm thick cement plaster in CM 1:3 onceilingand finishing the surface even and smooth (without using extra cement) etc.

M & L for 10mm thick cement plaster in CM 1:6 on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc.

Raking out joints/pointing cement mortar to random rubble or polygonal rubble uncoursed or brought up to courses complete all as specified and directed.

M & L for Keyed pointing to random or polygonal rubble, uncoursed or brought upto course CM 1:3 complete all as specified and directed.

Cutting down the plant/trees of girth n exc 15cm, from roof/top sides of external walls of bldgs, in chajjas, wall junctions, junctions of GI/CI/AC/PVC pipes and taking out roots entered in wall/slabs, applying emulsion of non toxic chemicals including making good the surface using PCC 1:2:4 type B1 or cement mortar (1:2) or brick work in CM(1:4) plastered with CM(1:4) to match with existing surface and repairing the pipes and joints which was affected by cutting down/taking out process all as specified and as directed for plants / trees located upto a ht of 7.50 mtrs from GL.etc. complete all as specified and directed by Engineer-in-charge.

Demolition of stone / block masonry built in CM complete all as specified and directed.

M & L for Walling of random rubble,uncoursed random rubble,uncoursed, well bonded, bedded and solidly hearted, for random or polygonal rubble walling, brought up to course built in cement motar 1:4

M&L for RCC (nominal mix) type B1 1:2:4( using 20 mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165

M&L for flat formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelve including sup- ports, overhangs, etc. also splays between floors and beams, etc.of rough finished of concrete complete all as specified & directed

M & L for Preparation of new wooden surfaces of any description having width/girth exceeding 10cm and applying two coat of synthetic enamel paint over pink primer for material and labour complete.

M & L for preperation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M & L for preperation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

Material & Labour and preparation for applying wall care putty on wall in three coats in three layers for smooth surfaces complete all as specified and directed by Engr in Charge.

M & L for complete removal of existing treatment of walls plastered or unplastered, Washing, rubbing down and stopping of distempered and painted surfaces, preparation and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work over a coat of alkali resistant primer including making good the surface complete all as specified and directed.

M & L for newly plastered surfaces Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work over a coat of alkali resistant primer including making good the surface complete all as specified and directed.

M & L for Preparation of old plastered surfaces/un plastered surfaces including brooming down with steel wire brushing scrapping down smoke spout moulds, moss and efflorescence, salt treating oil and greasy spots etc and applying two coat of white washing on old plastered surfaces of walls complete all as specified and directed.

Ditto all as per Ser Item No 106.00 above but on surface of on ceiling /soffits of slabs, chajjas all as specified and as directed at site.

M & L for prepartion of newly plastered surfaces and applying Two coats of 100% Premium acrylic emulsion paint ( Weather Proof) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces

M & L for complete removal of existing treatment of walls plastered or unplastered applying Two or more coats of 100% Premium acrylic emulsion paint ( Weather Proof) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces

Preparation of new or previously un-treated surfaces of steel and applying two coat of synthetic enamel paint to steel surfaces over one coat of red oxide of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise not otherwise specifically provided for complete all as specified and directed.

M&L for 75mm thick PCC in (1:2:4) type B2 using 20mm graded stone agg as in sunken floor complete all as specified and as directed

M&L for PCC 1:5:10 type E2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as directed

M&L for PCC 1:1½ : 3 or Bitumastic Gola with 80/25 bitumen and coarse sand mixer 1:3 by weight 8cm x8cm at the junction of roofing to vertical surface as in sunken or similar work complete all as directed

M&L for Bitumen blown 80/25 applied hot, two coats to concrete bedding surface @ 1.5Kg/Sqm per coat as in sunken floor complete all as directed

M&L for polythene flim black 50 micron laid in sunken floor complete all as directed

M&L for spout of 50mm bore GI pipe and projection 450mm clear from outer wall in any length or description with rubber ring joints and fixed in sunken floor etc for drain out logging as in sunken floor etc or similar work complete all as specified and as directed

M&L for 25mm thick PCC 1:1.5:3 type A0 using 12.5mm graded stone agg as in sunken floor mixed with water proofing comound finished fair and even complete all as specified and as directed (Note:- WPC shall be measured and paid separately)

M&L for Providing ce- ment concrete type C2 1:3:6 in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

S & F Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops second class hard wood and the like, including all necessary' labours; articles n exc 200 cu. cm each all as specified and directed

S & F Robe hook stainless glossy finish all as specified and directed

S & F corner glass self 300mm (with ABS Brackets )300 X 600mm

M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade with grey cement & pigment complete all as specified and directed.

M&L 25mm thick Sand filling under precast concrete inter locking paver floors or in foundations including watering and consolidation complete all as specified and directed.

M&L 75 thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate) laying as in Sub base complete all as specified and directed.

M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed

Taking down the existing surface batten type point wiring of aluminium for Light, fan, Sockets, power sockets, stair case light point complete with switch socket regulator , bracket fitting etc and making good disturbed surfaces for wall, floors etc as directed by Engr- in charge. including sorting out serviceable and unserviceable light fitting and keep serviceable fitting in safe guard for reuse as required on site.

Taking down the sub main wiring of any dia / sq mm on teak wood batten / PVC conduit GI earth wire all as directed.

Taking down cearfully by unscrewing the unserviceable DB Boxes, MCB distribution boards SP & TPN with porcelain cutouts etc all as directed.

Fixing only Serviceable light fittings obtained from item No 127.00 above as incl making coneection after completion of civil work as required on site and directed

Material and labour for providing point wiring with two runs of 1.5 Sqmm multi stranded copper conductor FRLS PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core multi stranded copper conductor FRLS PVC insulated 1100 Volts grade wire for continuous earthing complete in and including PVC casing and caping with all fittings/fixture etc incl surface mounted type moduler PVC box ISI marked alongwith modular cover plate and fram for housing switches / sockets all a specified and directed.

One light point controlled by one switch.

One light point controlled by two two way switches

One bell point one way switch

One Exhaust/Wall mounted /Ceiling point controlled by one regulator/switch

One 3 pin socket 5 A on independent board.

One 3 pin socket 5 A on same board.

Material and labour for providing point wiring with two runs of 2.5 Sqmm multi stranded copper conductor FRLS PVC insulated single core 1100 volts grade & with one run of 2.5 Sqmm single core copper stranded FRLS PVC insulated 1100 volts grade wire for continuous earthing completein and including PVC casing and caping with all fittings/fixture etc incl surface mounted type moduler PVC box ISI marked alongwith modular cover plate and fram for housing switches / sockets all a specified and directed.

S & F Sub Main Wiring with FRLS PVC Insulated multistranded copper conductor wires of size 2x6.0 sq. mm + 1x6.0 sq. mm earth wire in casing caping complete as directed.

S & F Sub Main Wiring with FRLS PVC Insulated multistranded copper conductor wires of size 2x4.0 sq. mm + 1x4 sq. mm earth wire in casing caping complete as directed. Note : For Ser Item No 134.00 & 135.00: One run of phase wire one run of Neutral wire and one run of Earth wire and one run of casing and capping shall be meassured and as one length.

S&F sheet metal enclosure with socket plug top , single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 20 Amps.including DB surface mounted on wall and making good the disturbed surface complete all as directed

S&F Vertical double door Distribution board TPN 4 way 125 A rated busbar consisting of MCCB. 63 A 18KA - 1 No including DB surface mounted on wall and making good the disturbed surface making all nacessary incomming and out going connections using proper size copper thimbles complete all as required on site all as directed

Supply and fix sheet metal enclosure MCB DB double door SPN 12 way 230 V with neutral link and with suitable bus bar and including DB surface mounted on wall and making good the disturbed surface making all nacessary incomming and out going connections using proper size copper thimbles complete all as required on site all as directed

Supply and fix MCB SPN 40 Amp, 230 volt 'C' series complete

S&F MCB SP 240 volt 6 to 32 A 'C' series complete

Supply and fix Modular switch 1 way 6A, 1 module

Supply and fix modular Socket, 6A - 2/3 pin combined 2 moduler

Supply and fix Modular switch 1 way 16A, 1 module

Supply and fix modolar Socket 6A/16A - 2/3 pin combined 2 module,

Supply and fix ceiling rose surface type bakelite/PVC three terminal 65x50mm

Supply and fix Modular Bell push 6A 1 module

Supply and fix bell electric 230V single pole complete as directed.

S & F modular Fan step regulator, 120W - 2 module

Supply and fix Modular switch 2 way 6A, 1 module

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and fix high quality indoor Surface and wall mounted LED batten 20 Watt approx 4 feet long, provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with industrial grade heavy duty having THD<10%. complete with all accessories internally pre-wired and including connecting up with three core 0.5 Sqmm flexible copper conductor cable ceiling rose to fitting terminal.

S & F LED light fitting PDC housing opal diffser IP 65 Potection 10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

S&F angle / batten holder insulated body with back plate for batten fittings complete all as specified and directed.

Supply and fix exhaust fan heavy duty with steel body 300 mm sweep copper winding single phase complete with frame , blades and louvers shutter made out of aluminium sheet of 0.5 mm thick, voltage 230V, 50 Hz, RPM 900, 1.5 Sq mm 3 core wire from ceiling rose to fan, including making suitable hole in wall and making good the disturbed surface as existing complete in all respect all as specified and directed

Taking down ceiling fan single phase 240 V 1200 mm /1400mm sweep from the existing position including disconnecting supply cable from ceiling rose / connector opening ceiling fan carefully and cleaning and washing the bearings /bushs thoroughly and applying two coats of synthetic enamel paint on ceiling fan including 3 Nos blades, hanging rod etc. and hanging in original position connecting and testing complete on completion of civil works of Bldg. Note : Minor Spares required for repair shall be measured and paid separately under respective item.

Supply and fix Ball Bearing 6202/6203 as required on site and as directed

Supply and fix bush as required on site and as directed

Supply and fix ceiling fan capacitor 2.5/3.15 mfd as required on site and as directed

Taking down the existing street light fitting and Supply & fix (in Repalcement) energy saving and environmental friendly long life LED Street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with impact and corrosion resistant including thermal management in multiple optics IP 65/IP66 road way luminaries with LEDs as light source and lens embedded PC cover /toughened glass and impact resistance of IK07 and electronic driver fixed on pole/wall with and including suitable dia size bracket as per manufacturer recommendation, bracket complete with MS flat iron clamps (clamp shall be 40x5 mm MS flat), nuts and bolts and washers painting the clamps with coat of aluminium paint over a coat of red oxide primer including connection complete all as specified.

M&L for providing earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6mm as earthing lead buried directly in ground vertically to a depth not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to and including galvanised wire4 mm as earthing lead by means of bolts, nuts, check nuts & washers etc made of GI and connected to earthing test point, providing charcoal and common salt all as shown in electrical plate No. 5 of SSR Part I of 2009 & as specified or indicated and testing on completion including exaction/earth work in any type of strata PCC (1:3:6) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete (1:2:4) type B1 (reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg/sqm), funnel with wire mesh, watering pipe of 20 mm bore medium grade and lugs, including galvanised iron wire 4 mm with GI protection pipe of 15 mm medium grade 7.5 meter long, etc complete all as specified.

M/s Kirti Enterprises

S.R.M.K Enterprises